CD4011B

UNISONIC TECHNOLOGIES CO., LTD CD4011B QUAD 2-INPUT NAND BUFFERED B SERIES GATE DESCRIPTION The UTC CD4011B contains four independent 2-input NAND gates which perform the function Y=A • B in positive logic. CMOS IC SOP-14 FEATURES * 5V-10V-15V Parametric Ratings * Quad 2-Input NAND Gate * Symmetrical Output Characteristics * Maximum Input Current of 1uA at 15V Over Full Package Temperature Rage * Low Power TTL: Fan Out of 2 Driving 74L or 1 Driving 74LS Compatibility ORDERING INFORMATION Ordering Number Lead Free Halogen Free CD4011BL-S14-R CD4011BG-S14-R Package SOP-14 Packing Tape Reel www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-517.b CD4011B PIN CONFIGURATION CMOS IC FUNCTION TABLE (each gate) INPUT(A) H H L L INPUT(B) H L H L OUTPUT(Y) L H H H LOGIC DIAGRAM (positive logic) nA nB nA nB & nY nY UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-517.b CD4011B ABSOLUTE MAXIMUM RATING(unless otherwise specified) PARAMETER Supply Voltage Input Voltage Output Voltage CMOS IC SYMBOL RATINGS UNIT VDD -0.5 ~ 18 V V(nA,nB) -0.5 ~ VDD +0.5 V V(nY) -0.5 ~ VDD +0.5 V Storage Temperature TSTG -65 ~ + 150 ℃ Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Operating Temprature SYMBOL VDD TOP RATINGS 3 ~ 15 -55 ~ 125 UNIT V ℃ ELECTRICAL CHARACTERISTICS(Ta=25°С) PARAMETER High-Level Input Voltage SYMBOL VIH TEST CONDITIONS VDD= 5V, VO=0.5V VDD= 10V, VO=1.0V VDD= 15V, VO=1.5V VDD= 5V, VO=4.5V VDD= 10V, VO=9.0V VDD= 15V, VO=13.5V VDD= 5V, │I0│＜1μA VDD= 10V, │I0│＜1μA VDD= 15V, │I0│＜1μA VDD= 5V, │I0│＜1μA VDD= 10V, │I0│＜1μA VDD= 15V, │I0│＜1μA VDD= 5V, VO=4.6V VDD= 10V, VO=9.5V VDD= 15V, VO=13.5V VDD= 5V, VO=0.4V VDD= 10V, VO=0.5V VDD= 15V, VO=1.5V VDD= 15V ,VIN = VDD or GND VDD= 5V, VIN = VDD or VSS, IOUT = 0 VDD= 10V, VIN = VDD or VSS, IOUT = 0 VDD= 15V, VIN = VDD or VSS, IOUT = 0 MIN 3.5 7.0 11.0 TYP 3 6 9 2 4 6 5 10 15 0 0 0 -0.88 -2.25 -8.8 0.88 2.25 8.8 0.004 0.005 0.006 MAX UNIT V 1.5 3.0 4.0 Low-Level Input Voltage VIL V High-Level Output Voltage VOH 4.95 9.95 14.95 V 0.05 0.05 0.05 Low-Level Output Voltage High-Level Output Current (NOTE) Low-Level Output Current (NOTE) Input Leakage Current Quiescent Supply Current VOL V IOH IOL II(LEAK) IQ -0.51 -1.3 -3.4 0.51 1.3 3.4 mA 0.1 0.25 0.5 1.0 µA µA Note: IOL and IOH are tested one output at a time UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 5 QW-R502-517.b CD4011B PARAMETER SYMBOL tPLH Propagation delay from Input(A or B) to Output(Y) tPHL tTLH tTHL TEST CONDITIONS VDD=5V, CL=50pF, RL=200kΩ VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ VDD=5V, CL=50pF, RL=200kΩ VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ VDD=5V, CL=50pF, RL=200kΩ VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ MIN TYP 85 40 30 120 50 35 90 50 40 CMOS IC SWITCHING CHARACTERISTICS(TA=25°С, Input: tR=tF=20ns,unless otherwise specified ) MAX 250 100 70 250 100 70 200 100 80 UNIT ns Transition Time ns OPERATING CHARACTERISTICS(Ta=25°С) PARAMETER Average Input Capacitance Power Dissipation Capacitance SYMBOL Cin Cpd TEST CONDITIONS Any Input Any Gate MIN TYP 5 14 MAX 7.5 UNIT pF UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R502-517.b CD4011B TEST CIRCUIT AND WAVEFORMS Output CL 50pF RL 200kΩ CMOS IC Definitions for test circuit VI VCC 50% 50% t PLH Vo 50% t PHL 50% 0V VOH VOL Propagation Delay Times Note: CL includes probe and jig capacitance. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-517.b