L1136_11

UNISONIC TECHNOLOGIES CO., LTD L1136 Preliminary CMOS IC HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR DESCRIPTION The UTC L1136 is an extremely low dropout regulator providing designers with low current dissipation, high output voltage accuracy and it is developed based on CMOS technology. The internal transistor with low-resistance provides small dropout voltage and the large output current. Various capacitors, as well as small ceramic capacitors, can be used for this IC more than for the conventional regulator ICs which have CMOS technology. The ON/OFF circuit can guarantee longer sure the battery life. The over-current protection circuit is designed to protect the device from being damaged because of load current while exceeding the capacitance of output transistor. The thermal shutdown protection circuit protects against heat and the rush current control protection circuit and limits the excessive rush current during start-up. The UTC L1136 is universally suitable for power supply of battery-powered devices, power supply of TV, notebook PCs and home electric appliances, and constant-voltage power supply of portable equipment. FEATURES * Output Voltage Ranges from 1.0 to 5.0V Selectable in 0.05V Step * Input Voltage Varies From 1.5 to 5.5V * Low Equivalent Series Resistance Capacitor: Ceramic Capacitor of 4.7μF or More can be used as the I/O Capacitor * High Accuracy Output Voltage: ±1.0%(1.0~1.45V output product: ±15mV) * Low Current Consumption: During operation: 70μA (TYP.), 90μA (MAX.) (3.0V output product) During shutdown: 0.1μA (TYP.), 1.0μA (MAX.) * Low Dropout Voltage: 70mV (TYP.) (3.0V output product, at IOUT = 200mA) * Output current: 600mA (3.0V output product, at VIN≥VOUT(S)+1.0V) (Attention should be paid to the power dissipation of the package when the output current is large.) * High ripple rejection: 70dB (TYP.) @ 1.0kHz, VOUT=1.0V * Internal Protection Circuits: Over-Current Protection Circuit, Thermal Shutdown Circuit And Rush Current Control Circuit * Internal Power On/Off Circuit Ensures Longer Battery Life * Special Care should be Taken to the Power Consumption of the Package when the Output Current is Large. ORDERING INFORMATION Ordering Number Lead Free Halogen Free L1136L-xx-AF5-R L1136G-xx-AF5-R Note: xx: Output Voltage, refer to Marking Information. L1136L-xx-AF5-R (1)Packing Type (2)Package Type (3)Output Voltage Code (4)Lead Free Package SOT-25 Packing Tape Reel (1) R: Tape Reel (2) AF5: SOT-25 (3) xx: Refer to Marking Information (4) G: Halogen Free, L: Lead Free www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd 1 of 9 QW-R502-464.b L1136 MARKING INFORMATION PACKAGE VOLTAGE CODE Preliminary MARKING 3 2 1 G: Halogen Free L: Lead Free Voltage Code CMOS IC SOT-25 33 :3.3V 4 HXXF 5 PIN CONFIGURATION NC 3 VSS ON/OFF 2 1 4 VIN 5 VOUT PIN DESCRIPTION PIN NO. PIN NAME DESCRIPTION 1 ON/OFF Shutdown pin 2 VSS GND pin 3 NC (Note) No connection 4 VIN Input voltage pin 5 VOUT Output voltage pin Note: The NC pin is electrically open and it can be connected to VIN or VSS. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 9 QW-R502-464.b L1136 BLOCK DIAGRAM Preliminary CMOS IC UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 9 QW-R502-464.b L1136 ABSOLUTE MAXIMUM RATING PARAMETER Preliminary CMOS IC SYMBOL RATINGS UNIT VIN VSS -0.3 ~ VSS +6 V Input Voltage VON/OFF VSS -0.3 ~ VIN +0.3 V Output Voltage VOUT VSS -0.3 ~ VIN +0.3 V Power Dissipation PD 1000 mW Ambient Operating Temperature TOPR -40 ~ +85 °C Storage Temperature TSTG -40 ~ +125 °C Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified.) PARAMETER SYMBOL TEST CONDITIONS VIN=VOUT(S)+1.0V, IOUT=100mA VIN=5.5V, IOUT=100mA VIN≥VOUT(S)+1.0V VIN=5.5V 1.0V≤VOUT(S)≤1.5V 1.5V≤VOUT(S)≤4.5V 4.5V≤VOUT(S)≤5.0V 1.0V≤VOUT(S)≤4.5V 4.5V≤VOUT(S)≤5.0V 1.1V≤VOUT(S)≤1.2V 1.2V≤VOUT(S)≤1.3V 1.4V≤VOUT(S)≤1.5V 1.5V≤VOUT(S)≤2.6V 2.6V≤VOUT(S)≤5.0V MIN VOUT(S) -0.015 VOUT(S) ×0.99 VOUT(S) ×0.99 600(Note 5) 600(Note 5) TYP VOUT(S) VOUT(S) VOUT(S) MAX UNIT VOUT(S) +0.015 VOUT(S) ×1.01 VOUT(S) ×1.01 TEST CIRCUIT V V V mA mA V V V V V 1 1 1 3 3 1 1 1 1 1 Output Voltage (Note 1) VOUT(E) Output Current (Note 2) IOUT Dropout Voltage (Note 3) VDROP IOUT=200mA 0.44 0.34 0.14 0.10 0.07 0.48 0.38 0.18 0.15 0.10 VIN=VOUT(S)+1.0V, IOUT=100mA ±130 1 1.0V≤VOUT(S)≤4.5V ppm/°C Output Voltage ΔVOUT -40≤TA ≤85°C Temperature ΔTA ⋅ VOUT VIN=5.5V, Coefficient (Note 4) IOUT=100mA ±130 1 4.5V≤VOUT(S)≤5.0V ppm/°C -40≤TA ≤85°C Note: 1. VOUT(S): Specified output voltage; VOUT(E): Actual output voltage The output voltage when fixing IOUT (=100mA) and inputting VOUT(S)+1.0V or 5.5V 2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current 3. VDROP = VIN1-(VOUT3×0.98) VOUT3 is the output voltage when VIN = VOUT(S)+1.0V or 5.5V, and IOUT = 200mA. VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input voltage. 4. The change in temperature [mV/°C] is calculated using the following equation. Δ VOUT Δ VOUT [ppm / ° C ] * 3 ÷ 1000 [mV / ° C ] *1 = VOUT ( S ) [ V ] * 2 × Δ TA • VOUT Δ TA *1. Change in temperature of the output voltage *2. Specified output voltage *3. Output voltage temperature coefficient 5. The output current can be at least this value. Due to limitation of the package power dissipation, this value may not be satisfied. Attention should be paid to the power dissipation of the package when the output current is large. This specification is guaranteed by design. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 9 QW-R502-464.b L1136 PARAMETER SYMBOL Preliminary TEST CONDITIONS MIN TYP 0.05 2.5 2.5 15 15 90 70 70 0.1 0.1 1.5 1.5 MAX 0.2 10 10 30 30 110 90 90 1.0 1.0 5.5 CMOS IC UNIT CIRCUIT %/V 1 mV 1 mV mV mV μA μA μA μA μA V V 4 1 1 1 2 2 2 2 2 TEST ELECTRICAL CHARACTERISTICS (Cont.) ΔVOUT1 VOUT(S)+0.5V≤VIN≤ 1.0V≤VOUT(S)≤3.6V 5.5V,IOUT=100mA 3.6V≤VOUT(S)≤4.8V ΔVIN ⋅ VOUT 5.3V≤VIN≤5.5V, 4.8V≤VOUT(S)≤5.0V IOUT=100mA VIN=VOUT(S)+1.0V, 1.0V≤VOUT(S)≤4.5V 1mA≤IOUT≤200mA ΔVOUT2 VIN=5.5V, 4.5V≤VOUT(S)≤5.0V 1mA≤IOUT≤200mA VIN=VOUT(S)+1.0V, ON/OFF pin=ON, no load, 1.0V≤VOUT(S)