L8020G-S08-R

UNISONIC TECHNOLOGIES CO., LTD L8020 Preliminary LINEAR INTEGRATED CIRCUIT DUAL POLARISATION SWITCH TWIN LNB MULTIPLEX CONTROLLER DESCRIPTION The UTC L8020 dual polarisation switch controller is one of a wide range of satellite receiver LNB support circuits. Its features include completely independent channels, and every channel provides two logic outputs under the voltage sensitive input. The two inputs of the UTC L8020 have a nominal threshold of 14.5V. Their threshold is temperature compensated to minimize drift. In order to achieve the transient protection by adding only a single resistor per channel, each input has a low and stable input current. Normal and inverted outputs are provided for each input. All outputs can source 15mA and sink 10mA making them suitable to drive TTL and CMOS logic, pin diodes and for IF-amp supply switching. The UTC L8020 works in a single supply ranging from 5V to12V. The quiescent current of the UTC L8020 is 4mA, and there is no remarkable change with load or logic state. In order to adapt the variation of environmental conditions, the ambient operating temperature is -40°C~+85°C. The UTC L8020 can be used in applications, such as IF switch box, LNB switch boxes and twin LNBs, replacing many discrete components to save both manufacturing cost and PCB size as well as improving reliability. FEATURES * * * * * * Avoid external components Provides polarity detection and control Transient resistant Low input and supply current Temperature compensated input threshold Normal and inverted output available while wide supply operating range * Dual polarisation switch * Simplify the design * Halogen Free ORDERING INFORMATION Ordering Number L8020G-S08-R Package SOP-8 Packing Tape Reel www.unisonic.com.tw Copyright © 2009 Unisonic Technologies Co., Ltd 1 of 4 QW-R123-015.a L8020 PIN CONFIGURATION Preliminary LINEAR INTEGRATED CIRCUIT Vert 1 Hor 1 Vert 2 Hor 2 1 2 3 4 8 7 6 5 VCC VP 1 VP 2 GND PIN DESCRIPTION PIN NO. 1 2 3 4 5 6 7 8 PIN NAME Vert1 Hor1 Vert2 Hor2 GND VP2 VP1 VCC DESCRIPTION Vertical output 1 Horizontal output 1 Vertical output 2 Horizontal output 2 Ground connection pin. Polarity select input 2 Polarity select input 1 Supply voltage UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R123-015.a L8020 Preliminary LINEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.6~+15 V Input Voltage (VPOL1 and VPOL2) VIN 25 V Supply Current ICC 50 mA Power Dissipation (Ta=25°C) PD 500 mW Operating Temperature TOPR -40~+85 °C Storage Temperature TSTG -40~+85 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (Ta= 25°C, VCC=5V, ID=10mA (RCAL1 =33kΩ), unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Supply Voltage VCC 5 12 V All inputs and outputs open circuit 10 mA Supply Current ICC IVERT1 =IVERT2 =10mA, VPOL1 =VPOL2 =14V 30 mA IHOR1 =IHOR2 =10mA, VPOL1 =VPOL2 =15.0V 30 mA VPOL1 and VPOL2 Inputs Current IPOL VPOL1 =VPOL2 =25V (Note 1) 10 20 40 μA Threshold Voltage VTPOL (Note 1) (Note 2) 14.0 14.5 15.0 Switching Speed TSPOL 100 μs Vert 1/2 Outputs IVERT1 =IVERT2 =10mA, VPOL1 =VPOL2 =14V VCC-1.0 VCC-0.8 VCC V Voltage High VVH IVERT1 =IVERT2 =15mA, VPOL1 =VPOL2 =14V VCC-1.2 VCC-0.9 VCC V IVERT1 =IVERT2 =10µA, VPOL1 =VPOL2 =14V VCC-0.2 VCC-0.1 VCC V Voltage Low VVL IVERT1 =IVERT2 =-10mA, VPOL1 =VPOL2 =15.0V 0 0.25 0.5 V Hor 1/2 Outputs IHOR1 =IHOR2 =10mA, VPOL1 =VPOL2 =15.0V VCC-1.0 VCC-0.8 VCC V Voltage High VVH IHOR1 =IHOR2 =15mA, VPOL1 =VPOL2 =15.0V VCC-1.2 VCC-0.9 VCC V IHOR1 =IHOR2 =10µA, VPOL1 =VPOL2 =15.0V VCC-0.2 VCC-0.1 VCC V Voltage Low VVLOW IHOR1 =IHOR2 =-10mA, VPOL1 =VPOL2 =14V 0 0.25 0.5 V Notes: 1. VPOL1 and VPOL2 switching thresholds apply over the whole operating temperature range specified above. 2. Applied via 10k resistors UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 4 QW-R123-015.a L8020 Preliminary LINEAR INTEGRATED CIRCUIT TYPICAL APPLICATION CIRCUIT A twin LNB design is as followed. In this block diagram, the UTC L8020 provides the two polarity switches required to decode the two independent receiver feeds. Horizontal Antenna 1 3 Gain Stage GaAs/HEMTFET Mixer H/V Output 1 Horizontal PIN Diode MUX Vertical H/V Output 2 Control DC Input 13-25V Control Input =15V-Vertical X Bias Generator Series Local OSC L8020 Series Dual H/V Switch X Mixer 4 2 Gain Stage GaAs/HEMTFET Vertical Antenna UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R123-015.a