LM2940G-XX-TQ3-R

UNISONIC TECHNOLOGIES CO., LTD LM2940 1A LOW-DROPOUT POSITIVE VOLTAGE REGULATOR DESCRIPTION The UTC LM2940 is a low dropout regulator designed to provide output current up to 1A with a typically 500mV dropout Voltage and a maximum of 1V. It is capable of reducing the ground current when the differential between the input voltage and the output voltage outrun 3V. UTC LM2940 offers low quiescent current (typically 30mA at 1A and an input-output differential of 5V). Higher quiescent currents only exist when the regulator is in the dropout mode (VIN-VOUT≤3V). LINEAR INTEGRATED CIRCUIT 1 FEATURES * 500mV Typically Dropout at 1A * Output Current in Excess of 1A * Low Quiescent Current * Reversed-Battery Protection * Current Limit and Thermal Shutdown. * Mirror Image Insertion Protection ORDERING INFORMATION Ordering Number Lead Free Halogen Free LM2940L-xx-AA3-R LM2940G-xx-AA3-R LM2940L-xx-TA3-T LM2940G-xx-TA3-T LM2940L-xx-TN3-R LM2940G-xx-TN3-R LM2940L-xx-TN3-T LM2940G-xx-TN3-T LM2940L-xx-TQ2-R LM2940G-xx-TQ2-R LM2940L-xx-TQ2-T LM2940G-xx-TQ2-T LM2940L-xx-TQ3-R LM2940G-xx-TQ3-R LM2940L-xx-TQ3-T LM2940G-xx-TQ3-T Note: 1.xx: Output Voltage, refer to Marking Information. 2.Pin Assignment: I: VIN G: GND O:VOUT Package SOT-223 TO-220 TO-252 TO-252 TO-263 TO-263 TO-263-3 TO-263-3 Pin Assignment 1 2 3 I G O I G O I G O I G O I G O I G O I G O I G O Packing Tape Reel Tube Tape Reel Tube Tape Reel Tube Tape Reel Tube www.unisonic.com.tw Copyright © 2010 Unisonic Technologies Co., Ltd 1 of 11 QW-R102-016.J LM2940 MARKING INFORMATION PACKAGE VOLTAGE CODE LINEAR INTEGRATED CIRCUIT MARKING SOT-223 TO-220 TO-252 TO-263 TO-263-3 50 : 5V 60 : 6V 80 : 8V 90 : 9V 10 :10V 12 :12V 15 :15V Voltage Code Lot Code UTC LM2940 L: Lead Free G: Halogen Free Date Code 1 2 3 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 11 QW-R102-016.J LM2940 ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL VIN PD TJ LINEAR INTEGRATED CIRCUIT RATINGS UNIT Input Voltage 26 V Power Dissipation Internally limited Junction Temperature +150 °C Ambient Operating TO-220/TO-263-3/TO-263 -40 ~ +125 °C TOPR Temperature -40 ~ +85 °C SOT-223 Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER SOT-223 Junction to Ambient TO-220 TO-263/TO-263-3 TO-220 Junction to Case TO-263/TO-263-3 SYMBOL θJA θJC RATING 174 60 80 4 4 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS (Ta=TJ =25°C, VIN=VOUT+5V, IOUT=1A and COUT=22μF, unless otherwise specified.) For LM2940-5.0V PARAMETER SYMBOL TEST CONDITIONS Output Voltage VOUT 6.25V ≤ VIN ≤ 26V, 5mA ≤ IOUT ≤ 1A Line Regulation △VOUT VOUT+2V ≤ VIN ≤ 26V, IOUT=5mA Load Regulation △VOUT 50mA ≤ IOUT ≤ 1A Output Impedance ROUT 100 mA DC and 20mArms, fo=120Hz Quiescent Current IQ VOUT+2V ≤ VIN ≤ 26V, IOUT=5mA Output Noise Voltage eN 10Hz-100kHz, IOUT=5mA Ripple Rejection RR fo=120Hz, 1Vrms, IOUT=100mA Long Term Stability IOUT=1A Dropout Voltage VD IOUT=100mA Short Circuit Current ISC (Note) Maximum Line Transient TIN ROUT=100Ω, T ≤ 100ms Reverse Polarity DC Input Voltage VRIN ROUT=100Ω Reverse Polarity Transient Input VTRRI ROUT=100Ω, T ≤ 100ms Voltage For LM2940-6.0V PARAMETER SYMBOL TEST CONDITIONS Output Voltage VOUT 7.5V ≤ VIN ≤ 26V, 5mA ≤ IOUT ≤ 1A Line Regulation △VOUT VOUT+2V ≤ VIN ≤ 26V, IOUT=5mA Load Regulation △VOUT 50mA ≤ IOUT ≤ 1A Output Impedance ROUT 100 mA DC and 20mArms, fo=120Hz Quiescent Current IQ VOUT+2V ≤ VIN ≤ 26V, IOUT=5mA Output Noise Voltage eN 10Hz-100kHz, IOUT=5mA Ripple Rejection RR fo=120Hz, 1Vrms, IOUT=100mA Long Term Stability IOUT=1A Dropout Voltage VD IOUT=100mA Short Circuit Current ISC (Note) Maximum Line Transient TIN ROUT=100Ω, T ≤ 100ms Reverse Polarity DC Input Voltage VRIN ROUT=100Ω Reverse Polarity Transient Input VTRRI ROUT=100Ω, T ≤ 100ms Voltage MIN 4.85 54 60 -15 -50 MIN 5.82 TYP 5.00 20 35 35 10 150 72 20 0.5 0.13 2.5 75 -30 -75 TYP 6.00 20 40 40 10 180 72 20 0.5 0.13 2.5 75 -30 -75 MAX 5.15 50 50 15 UNIT V mV mV mΩ mA μVrms dB mV/1000Hr 0.8 0.15 V A V V V MAX 6.18 60 60 15 60 UNIT V mV mV mΩ mA μVrms dB mV/1000Hr 0.8 0.15 V A V V V 3 of 11 60 -15 -50 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw QW-R102-016.J LM2940 ELECTRICAL CHARACTERISTICS(Cont.) For LM2940-8.0V PARAMETER Output Voltage Line regulation Load Regulation Output Impedance Quiescent Current Output Noise Voltage Ripple Rejection Long Term Stability Dropout Voltage Short Circuit Current Maximum Line Transient Reverse Polarity DC Input Voltage Reverse Polarity Transient Input Voltage For LM2940-9.0V PARAMETER Output Voltage Line regulation Load Regulation Output Impedance Quiescent Current Output Noise Voltage Ripple Rejection Long Term Stability Dropout Voltage Short Circuit Current Maximum Line Transient Reverse Polarity DC Input Voltage Reverse Polarity Transient Input Voltage For LM2940-10V PARAMETER Output Voltage Line regulation Load Regulation Output Impedance Quiescent Current Output Noise Voltage Ripple Rejection Long Term Stability Dropout Voltage Short Circuit Current Maximum Line Transient Reverse Polarity DC Input Voltage Reverse Polarity Transient Input Voltage SYMBOL VOUT △VOUT △VOUT ROUT IQ eN RR VD ISC TIN VRIN VTRRI LINEAR INTEGRATED CIRCUIT TEST CONDITIONS 9.4V ≤ VIN ≤ 26V, 5mA ≤ IOUT ≤ 1A VOUT +2V ≤ VIN ≤ 26V, IOUT=5mA 50mA ≤ IOUT ≤1A 100 mA DC and 20mArms, fo=120Hz VOUT +2V ≤ VIN ≤ 26V, IOUT =5mA 10Hz-100kHz, IOUT =5mA fo=120Hz, 1Vrms, IOUT =100mA IOUT =1A IOUT =100mA (Note) ROUT=100Ω, T ≤ 100ms ROUT=100Ω ROUT=100Ω, T ≤ 100ms MIN 7.76 54 60 -15 -50 TYP 8.00 20 55 55 10 240 66 32 0.5 0.13 2.5 75 -30 -75 MAX 8.24 80 80 15 UNIT V mV mV mΩ mA μVrms dB mV/1000Hr 0.8 0.15 V A V V V SYMBOL VOUT △VOUT △VOUT ROUT IQ eN RR VD ISC TIN VRIN VTRRI TEST CONDITIONS 10.5V ≤ VIN ≤ 26V, 5mA ≤ IOUT ≤ 1A VOUT +2V ≤ VIN ≤ 26V, IOUT =5mA 50mA ≤ IOUT ≤ 1A 100 mA DC and 20mArms, fo=120Hz VOUT +2V ≤ VIN ≤ 26V, IOUT =5mA 10Hz-100kHz, IOUT =5mA fo=120Hz, 1Vrms, IOUT =100mA IOUT =1A IOUT =100mA (Note) ROUT=100Ω, T ≤ 100ms ROUT=100Ω ROUT=100Ω, T ≤ 100ms MIN 8.73 52 60 -15 -50 TYP 9.00 20 60 60 10 270 64 34 0.5 0.13 2.5 75 -30 -75 MAX 9.27 90 90 15 UNIT V mV mV mΩ mA μVrms dB mV/1000Hr 0.8 0.15 V A V V V SYMBOL VOUT △VOUT △VOUT ROUT IQ eN RR VD ISC TIN VRIN VTRRI TEST CONDITIONS 11.5V ≤ VIN ≤ 26V, 5mA ≤ IOUT ≤ 1A VOUT +2V ≤ VIN ≤ 26V, IOUT =5mA 50mA ≤ IOUT ≤ 1A 100 mA DC and 20mArms, fo=120Hz VOUT +2V ≤ VIN ≤ 26V, IOUT =5mA 10Hz-100kHz, IOUT =5mA fo=120Hz, 1Vrms, IOUT =100mA IOUT =1A IOUT =100mA (Note) ROUT=100Ω, T ≤ 100ms ROUT=100Ω ROUT=100Ω, T ≤ 100ms MIN 9.70 51 60 -15 -50 TYP 10.00 20 65 65 10 300 63 36 0.5 0.13 2.5 75 -30 -75 MAX 10.30 100 100 15 UNIT V mV mV mΩ mA μVrms dB mV/1000Hr 0.8 0.15 V A V V V 4 of 11 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw QW-R102-016.J LM2940 ELECTRICAL CHARACTERISTICS(Cont.) UTC LM2940-12V PARAMETER Output Voltage Line regulation Load Regulation Output Impedance Quiescent Current Output Noise Voltage Ripple Rejection Long Term Stability Dropout Voltage Short Circuit Current Maximum Line Transient Reverse Polarity DC Input Voltage Reverse Polarity Transient Input Voltage SYMBOL VOUT △VOUT △VOUT ROUT IQ eN RR VD ISC TIN VRIN VTRRI LINEAR INTEGRATED CIRCUIT TEST CONDITIONS 13.6V ≤ VIN ≤ 26V, 5mA ≤ IOUT ≤ 1A VOUT +2V ≤ VIN ≤ 26V, IOUT =5mA 50mA ≤ IOUT ≤ 1A 100 mADC and 20mArms, fo=120Hz VOUT +2V ≤ VIN ≤ 26V, IOUT =5mA 10Hz-100kHz, IOUT =5mA fo=120Hz, 1Vrms, IOUT =100mA IOUT =1A IOUT =100mA (Note) ROUT=100Ω, T ≤ 100ms ROUT=100Ω ROUT=100Ω, T ≤ 100ms MIN 11.64 54 60 -15 -50 TYP 12.00 20 55 80 10 360 66 48 0.5 0.11 2.5 75 -30 -75 MAX 12.36 120 120 15 UNIT V mV mV mΩ mA μVrms dB mV/1000Hr 0.8 0.15 V A V V V UTC LM2940-15V PARAMETER Output Voltage Line regulation Load Regulation Output Impedance Quiescent Current Output Noise Voltage Ripple Rejection Long Term Stability Dropout Voltage SYMBOL VOUT △VOUT △VOUT ROUT IQ eN RR VD TEST CONDITIONS 16.75V ≤ VIN ≤ 26V, 5mA ≤ IOUT ≤ 1A VOUT +2V ≤ VIN ≤ 26V, IOUT =5mA 50mA ≤ IOUT ≤ 1A 100 mADC and 20mArms, fo=120Hz VOUT +2V ≤ VIN ≤ 26V, IOUT =5mA 10Hz-100kHz, IOUT =5mA fo=120Hz, 1Vrms, IOUT =100mA IOUT =1A IOUT =100mA (Note) ROUT=100Ω, T ≤ 100ms ROUT=100Ω MIN 14.55 TYP 15.00 20 70 100 10 450 64 60 0.5 0.11 2.5 75 -30 -75 MAX 15.45 150 150 15 UNIT V mV mV mΩ mA μVrms dB mV/1000Hr 52 0.8 0.15 V A V V V Short Circuit Current ISC Maximum Line Transient TIN Reverse Polarity DC Input Voltage VRIN Reverse Polarity Transient Input VTRRI ROUT=100Ω, T ≤ 100ms Voltage Note: Output current will decrease with temperature increase but will not drop below temperature. 60 -15 -50 1A at the maximum specified UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 11 QW-R102-016.J LM2940 TYPICAL APPLICATION LINEAR INTEGRATED CIRCUIT Note: 1. C1 is required if regulator is located far from power supply filter. 2. CO must be higher than 22μF for stability, and locate as close as possible to the regulator. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 11 QW-R102-016.J LM2940 TYPICAL CHARACTERISTICS Dropout Voltage vs. Output Current 0.9 0.8 Input-Output Differential (V) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 200 400 600 800 Output Current (mA) 1000 1.0 0.9 0.8 Dropout Voltage (V) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 LINEAR INTEGRATED CIRCUIT Dropout Voltage vs.Temperature TJ=25°С 1A 500mA 100mA 40 120 80 Temperature (°С) 0 -40 0 160 Output Voltage vs. Temperature 5.10 5.08 5.04 5.02 5.00 4.98 4.96 4.94 4.92 4.90 -40 0 40 80 120 Temperature (°С) 160 0 -40 Quiescent Current (mA) 5.06 Output Voltage (V) 40 50 Quiescent Current vs. Temperature VIN=VOUT+5V 30 1A 20 10 500mA 10mA 0 40 80 120 Temperature (°С) 160 200 180 Quiescent Current (mA) 160 140 120 100 80 60 40 20 0 0 Quiescent Current vs. Input Voltage 50 40 Quiescent Current (mA) Quiescent Current vs. Load Current VIN=14V VOUT=5V TJ=25°С 30 100mA 1A 500mA 20 10 5 20 10 15 25 Input Voltage (V) 30 35 0 0 0.2 0.4 0.6 Load Current (A) 0.8 1.0 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 11 QW-R102-016.J LM2940 TYPICAL CHARACTERISTICS (Cont.) Line Transient Response Output Voltage Deviation (V) 30 20 10 0 -10 -20 -30 Input Voltage Change(V) Load Current (A) 0.5 0.4 0.3 0.2 0.1 0 -0.1 -0.2 -0.3 -0.4 -0.5 1.0 0.5 LINEAR INTEGRATED CIRCUIT Load Transient Response Output Voltage Deviation(mV) VIN=10V VoUT=5 V COUT=22μF TJ=25°С 3V 0V -10 0 10 30 20 Time (μS) 40 50 60 0 -10 0 10 20 Time (μS) Low Voltage Behavior 30 40 Ripple Rejection vs. Frequency 95 85 Ripple Rejection (dB) 75 65 55 45 35 10 100 1K 10K 100K 1M 1.0 1.0 VIN=10V VoUT=5 V COUT=22μF IoUT=10mA Output Voltage (V) 5.0 IoUT=1A VoUT=5 V TJ=25°С 4.0 3.0 2.0 1 2.0 Frequency (Hz) 14 12 Output Voltage (V) 10 8 6 4 2 0 0 2 4 8 6 10 Input Voltage (V) 12 14 Low Voltage Behavior 18 15 Output Voltage (V) 12 9 6 3 0 0 3 4.0 3.0 5.0 Input Voltage (V) 6.0 Low Voltage Behavior IoUT=1A VoUT=8 V TJ=25°С IoUT=1A VoUT=9 V TJ=25°С 6 9 12 Input Voltage (V) 15 18 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 8 of 11 QW-R102-016.J LM2940 TYPICAL CHARACTERISTICS (Cont.) LINEAR INTEGRATED CIRCUIT Output Voltage (V) Output Voltage (V) Output Voltage (V) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Output Voltage (V) Output Voltage (V) Output Voltage (V) 9 of 11 QW-R102-016.J LM2940 TYPICAL CHARACTERISTICS (Cont.) Output at Voltage Extremes 25 20 15 10 5 0 -5 -30 LINEAR INTEGRATED CIRCUIT Output at Voltage Extremes 20 16 12 8 4 0 -4 -30 ROUT=100Ω VOUT=10V ROUT=100Ω VOUT=12V -20 10 0 20 -10 Input Voltage (V) 30 40 -20 0 10 -10 20 Input Voltage (V) Output Capacitor ESR 30 40 Output at Voltage Extremes 25 20 15 10 5 ROUT=100Ω VOUT=15V 100 COUT=22μF VOUT=5V 10 1 STABLE REGION 0.1 0 -5 -30 0.01 -20 0 10 -10 20 Input Voltage (V) Peak Output Current 3.0 10.00 30 40 0 400 200 600 800 Output Current (mA) Output Impedance 1000 VIN=14V VIN=10V 5.00 VOUT=5 V COUT=22μF 2.00 IoUT=50mA 2.0 1.00 0.50 0.20 1.0 0.10 0.05 0.02 0 -40 0 40 80 120 160 0.01 1 10 100 1K 10K 100K 1M Temperature (°С) Frequency (Hz) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 10 of 11 QW-R102-016.J LM2940 TYPICAL CHARACTERISTICS (Cont.) LINEAR INTEGRATED CIRCUIT U TC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 11 of 11 QW-R102-016.J