LM2954-50-AA3-K

UNISONIC TECHNOLOGIES CO., LTD LM2954 300 mA LOW-DROPOUT VOLTAGE REGULATOR DESCRIPTION The UTC LM2954 is a monolithic integrated voltage regulator with low dropout voltage, and low quiescent current. It includes many features that suitable for different applications with TO-92, DIP-8, SOP-8 and SOT-223 packages. 1 SOT-223 1 T O-92 LINEAR INTEGRATED CIRCUIT FEATURES *High accuracy fixed output. *Output voltage programmable and Logic controlled shutdown and error flag available for DIP and SOP package. *Extremely low quiescent current and dropout voltage. *Extremely tight load and line regulation. *Current and thermal limiting. *Very low temperature coefficient. SOP- 8 DIP-8 *Pb-free plating product number: LM2954L ORDERING INFORMATION Order Number Normal Lead Free Plating LM2954-xx-AA3-R LM2954L-xx-AA3-R LM2954-xx-D08-T LM2954L-xx-D08-T LM2954-xx-S08-R LM2954L-xx-S08-R LM2954-xx-S08-T LM2954L-xx-S08-T LM2954-xx-T92-B LM2954L-xx-T92-B LM2954-xx-T92-K LM2954L-xx-T92-K Package SOT-223 DIP-8 SOP-8 SOP-8 TO-92 TO-92 Pin assignment 1 2 3 I G O refer to Pin Configurations O O G G I I Packing Tape Reel Tube Tape Reel Tube Tape Box Bulk Note: 1. Pin assignment: I:Vin O:Vout G:Ground 2.xx: Output Voltage L M2954L-xx-AA3-R (1)Packing Type (2)Package Type (3)Output Voltage Code (4)Lead Plating (1) B: Tape Box, K: Bulk, R: Tape Reel, T: Tube (2) AA3: SOT-223, D08: DIP-08, S08: SOP-8, T 92: TO-92 (3) xx: 3.3V:33, 5.0V:50, ADJ:AD (4) L: Lead Free Plating Blank: Pb/Sn , www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd 1 of 7 QW-R102-002.E LM2954 MARKING INFORMATION PACKAGE VOLTAGE CODE LINEAR INTEGRATED CIRCUIT MARKING LM2954 SOT-223 33:3.3V 50:5.0V VOLTAGE CODE LEAD PLATING DATE CODE 1 2 3 UTC TO-92 3.3:3.3V 5.0:5.0V LM2954 VOLTAGE CODE LEAD PLATING DATA CODE 1 3.3:3.3V 5.0:5.0V LEAD PLATING UTC DATA CODE 2954 VOLTAGE CODE SOP-8/DIP-8 UTC ADJ DATA CODE LM 2954 LEAD PLATING UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 7 QW-R102-002.E LM2954 PIN CONFIGURATIONS LINEAR INTEGRATED CIRCUIT UTC LM2954 1 2 3 OUTPUT INPUT GND TO-92 Plastic Package Bottom View UTC LM2954 INPUT GND OUTPUT SOT-223 Package OUTPUT 1 8 INPUT SENSE 2 UTC LM2954 7 FEEDBACK SHUTDOWN 3 4 6 5V TAP GND 5 ERROR SOP-8 or DIP-8 Package UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 7 QW-R102-002.E LM2954 BLOCK DIAGRAM LINEAR INTEGRATED CIRCUIT UNREGULATED DC FEEDBACK INPUT OUTPUT 5V 150mA MAX. SENSE 182kΩ FROM CMOS OR TTL SHUT DOWN 60mV ERROR AMPLIFIER 60kΩ ERROR 1.23 REF ERROR DETECTION COMPARATOR TO CMOS OR TTL GND 5V TAP 1.5 µF 330KΩ UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 7 QW-R102-002.E LM2954 ABSOLUTE MAXIMUM RATINGS LINEAR INTEGRATED CIRCUIT PARAMETER SYMBOL VALUE UNIT Supply Voltage VCC -0.3 ~ +30 V Feedback Voltage VFB -1.5 ~ +30 V Shutdown Voltage VSHDN -0.3 ~ +30 V Comparator Output Voltage VOUT -0.3 ~ +30 V Junction Temperature TJ +125 °C Operating Temperature TOPR -20 ~ +85 °C Storage temperature TSTG -40 ~ +150 °C Note: 1.Absolute maximum ratings are those values beyond which the device which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2.The device is guaranteed to meet performance specification within 0℃~+70℃ operating temperature range and assured by design from -20℃~+85℃, characteristic and correlation with static process control. ELECTRICAL CHARACTERISTICS(TJ=25°C, VIN=6V, IL=100µA, CL=1µF, unless otherwise specified) PARAMETER LM2954-3.3 Output Voltage LM2954-5.0 Output Voltage Temperature Coefficient Line Regulation Load Regulation Dropout Voltage Ground Current Dropout Ground Current Current Limit Output Noise (10Hz to 100KHz) LM2954-ADJ For 8-Pin Version Only Reference Voltage Reference Voltage Feedback Pin Bias Current Reference Voltage Temperature Coefficient Feedback Bias Current Temperature Coefficient SYMBOL VOUT TEST CONDITIONS TJ=25°C MIN. 3.23 4.90 20 TYP. 3.3 5.0 0.1 0.2 380 0.075 8 110 300 450 0.12 12 170 MAX. UNIT 3.37 V 5.10 100 ppm/°C 0.2 % 0.5 400 mV 600 0.14 mA 14 200 µA mA 430 µV 160 100 1.25 1.27 20 50 0.1 40 V V nA ppm/°C nA/°C TCVO △VOUT 6V≦VIN≦30V △VOUT 100µA≦IL≦300 mA IL=100mA VD IL=200mA (note 2) IL=100µA IGND IL=200mA ID VIN=4.5V,IL=100µA ILIMIT VOUT=0 CL=1µF eN CL=200µF CL=3.3µF VREF VREF IB(FB) TCVREF TCIO VREF≤VOUT≤(VIN-1V), 2.3V≤VIN≤30V, 100µA≤IL≤100mA, TJ≤TJMAX 1.22 1.19 1.235 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 7 QW-R102-002.E LM2954 ELECTRICAL CHARACTERISTICS(Cont.) PARAMETER Error Comparator Output Leakage Current Output Low Voltage Upper Threshold Voltage Lower Threshold Voltage Hysteresis Shutdown Input Input Logic Voltage SYMBOL ILEAK VOL VTHD(UP) VTHD(LOW) VHYS LINEAR INTEGRATED CIRCUIT TEST CONDITIONS VOH=30V VIN=4.5V, IOL=400µA (Note 3) (Note 3) (Note 3) MIN. TYP. MAX. 1 250 UNIT µA mV %VOUT %VOUT mV 3.2 7.6 15 Low (Regulator ON) 1.3 0.70 High (Regulator OFF) 2.0 VSHDN=2.4V 30 50 Shutdown Pin Input Current II(SHDN) VSHDN=30V 450 600 VSHDN≧2V,VIN≦30V, VOUT=0, Regulator Output Current Shutdown IO(SHDN) 3 10 Feedback pin tied to 5V Tap. Note 1: Additional conditions for 8-pin versions are feedback tied to 5V Tap an Output tied to Output Sense (VOUT=5V) and VSHDN≦0.8V. Note 2: Dropout voltage is defined as the input to output differential at which the output voltage drops 100mV its nominal value measured at 1V differential. Note 3: Comparator thresholds are expressed in terms of percentage value of voltage output. VI(LOG) V µA µA µA below UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 7 QW-R102-002.E LM2954 APPLICATION CIRCUIT (10A Low Dropout Regulator) For 8 Pins CURRENT LIMIT SECTION +VIN=VOUT+0.5V LINEAR INTEGRATED CIRCUIT 680Ω 2N3906 470Ω 0.05Ω UTC D65H0 4.7MΩ 8 +VIN ERROR UTC LM2954 3 SD FB GND 4 VOUT 1 5 10kΩ +VOUT 10 A R1 100μF 7 R2 1% 4.7 μF 220Ω 20kΩ 47Ω 0.033μF VOUT=1.23V*(1+R1/R2) For 5V output use internal resistors.Wire pin 6 to 7 and wire pin 2 to +VOUT For 3 Pins VIN 1 µF UTC LM2954-3.3 UTC LM2954-5.0 VOUT 1 µF U TC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 7 QW-R102-002.E