LM393L-S08-T

UNISONIC TECHNOLOGIES CO., LTD LM393 DUAL DIFFERENTIAL COMPARATOR SOP-8 LINEAR INTEGRATED CIRCUIT DESCRIPTION The UTC LM393 consists of two independent voltage comparators, designed specifically to operate from a single power supply over a wide voltage range. TSSOP-8 FEATURES * Single or dual supply operation. * Wide operating supply range (VCC=2V ~ 36V or ±1 ~ ±18V) * Input common-mode voltage includes ground. * Low supply current drain ICC=0.8mA (Typical). * Low input bias current IBIAS=25nA (Typical). * Output compatible with TTL, DTL, and CMOS logic system. DIP-8 *Pb-free plating product number: LM393L ORDERING INFORMATION Ordering Number Normal Lead Free Plating LM393-D08-T LM393L-D08-T LM393-P08-R LM393L-P08-R LM393-P08-T LM393L-P08-T LM393-S08-R LM393L-S08-R LM393-S08-T LM393L-S08-T Package DIP-8 TSSOP-8 TSSOP-8 SOP-8 SOP-8 Packing Tube Tape Reel Tube Tape Reel Tube www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd 1 of 6 QW-R104-002,F LM393 PIN DESCRIPTION LINEAR INTEGRATED CIRCUIT OUT 1 1 8 Vcc IN 1(-) 2 7 OUT 2 IN 1(+) 3 6 IN 2(-) GND 4 5 IN 2(+) BLOCK DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 6 QW-R104-002,F LM393 ABSOLUTE MAXIMUM RATINGS LINEAR INTEGRATED CIRCUIT PARAMETER SYMBOL RATINGS UNIT ±18 or 36 Supply Voltage VCC V Differential Input Voltage VI(DIFF) 36 V Input Voltage VIN -0.3 ~ +36 V Power Dissipation PD 570 mW Operating Temperature Range TOPR 0 ~ +70 °C Storage Temperature Range TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (VCC=5.0V, Ta=25°C, All voltage referenced to GND unless otherwise specified) PARAMETER Input Offset Voltage Output Saturation Voltage Input Common Mode Voltage Large Signal Voltage Gain Power Supply Current Input Offset Current Input Bias Current Output Sink Current Output Leakage Current Large Signal Response Time Response Time SYMBOL VI(OFF) VSAT VI(CM) GV ICC II(OFF) II(BIAS) IO(SINK) IO(LEAK) tR tR TEST CONDITIONS VCM=0V toVCC-1.5V VO(P)=1.4V, RS=0Ω VI(-)>1V, VI(+)=0V, ISINK=4mA VCC=30V VCC=15V, RL≧15KΩ RL=∝, VCC=30V RL=∝ MIN TYP 1.0 160 0 50 200 0.8 0.6 5 65 18 0.1 350 1400 MAX 5.0 400 VCC-1.5 2.5 1.0 50 250 UNIT mV mV V V/mV mA mA nA nA mA nA μA ns ns VI(-)>1V, VI(+)=0V, Vo(p)