LV324G-S14-R

UNISONIC TECHNOLOGIES CO., LTD LV324 Preliminary CMOS IC GENERAL PURPOSE, LOW VOLTAGE, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS  DESCRIPTION The UTC LV324 is a quad op amp with low supply current and low voltage (2.7~5.5V). It brings nice performance to low voltage and low power systems. With a 1MHz unity-gain frequency. The UTC LV324 has a guaranteed 1V//μs slew rate and low supply current. It provides heavy rail-to-rail (R-to-R) output swing loads and the input common-mode voltage range including ground. Besides, it is also capable for comfortably driving large capacitive loads. The UTC LV324 has bipolar input and CMOS output for improved noise performance and higher output current drive. It’s the most cost effective solution for the applications where low voltage operation, space saving and low price are required.  FEATURES * 4-Channels Op amps * Rail-to-Rail Output Swing * Widely Input Common-Mode Voltage Range * Low Voltage Operation * Low Supply Current: Typ.=410μA @ V+ =5V, V-=0V  RDERING INFORMATION Ordering Number LV324G-S14-R LV324G-P14-R LV324G-S14-R  * Perfect AC characteristics: GBW: Typ.=1MHz SR: Typ.=1V/μs φm: Typ.=60Deg Gm: Typ.=10dB. Package SOP-14 TSSOP-14 (1)Packing Type (1) R: Tape Reel (2)Package Type (2) S14: SOP-14, P14: TSSOP-14 (3)Green Package (3) G: Halogen Free and Lead Free Packing Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 6 QW-R502-A08.b LV324 Preliminary  PIN CONFIGURATION  PIN DESCRIPTION PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PIN NAME OUT A IN AIN A+ V+ IN B+ IN BOUT B OUT C IN C+ IN C V IN D+ IN DOUT D CMOS IC FUNCTION Output of channel A Inverting Input of Channel A Non-Inverting Input of Channel A Positive of Supply Voltage Non-Inverting Input of Channel B Inverting Input of Channel B Output of channel B Output of channel C Inverting Input of Channel C Non-Inverting Input of Channel C Negative of Supply Voltage Non-Inverting Input of Channel D Inverting Input of Channel D Output of channel D UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 6 QW-R502-A08.b LV324  Preliminary CMOS IC BLOCK DIAGRAM 14 OUT D OUT A 1 IN A- 2 - A + + D - IN A+ 3 12 IN D+ V+ 4 11 V- IN B+ 5 IN B- 6 10 IN C+ - B + OUT B 7 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 13 IN D- + C - 9 IN C- 8 OUT C 3 of 6 QW-R502-A08.b LV324  Preliminary CMOS IC ABSOLUTE MAXIMUM RATING (Note) PARAMETER SYMBOL RATINGS UNIT Differential Input Voltage VIDM ±Supply Voltage V + + Supply Voltage (V -V ) V -V 5.5 V Output Short Current to V+ IO(SC) Note 1 A Output Short Current to VIO(SC) Note 2 A Infrared or Convection (20sec) 235 °C Operating Ratings Supply Voltage V+-V2.7 ~ 5.5 V Temperature Range TA -40 ~ +85 °C Junction Temperature TJ 150 °C Storage Temperature Range TSTG -65 ~ 150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Shorting output to V+ will adversely affect reliability. 3. Shorting output to V- will adversely affect reliability.  THERMAL DATA PARAMETER RATINGS SOP-14 145 Thermal Resistance (Note) θJA TSSOP-14 155 Note: All numbers are typical, and apply for packages soldered directly onto a PC board in still air.  SYMBOL UNIT C/W C/W 2.7V ELECTRICAL CHARACTERISTICS All limits guaranteed for TJ=25°C, V+=2.7V, V-=0V, VCM=1.0V, VOUT=V+/2 and RL>1MΩ, unless otherwise specified. MIN TYP MAX UNIT PARAMETER SYMBOL TEST CONDITIONS (Note 6) (Note 5) (Note 6) DC CHARACTERISTICS Input Offset Voltage VOS 1.7 7 mV Input Offset Voltage Average Drift TCVOS 5 μV/°C Input Bias Current IB 11 250 nA Input Offset Current IOS 5 50 nA Common Mode Rejection Ratio CMRR 0V≤VCM≤1.7V 50 63 dB + Power Supply Rejection Ratio PSRR 2.7V≤V ≤5V, VO=1V 50 60 dB 0 -0.2 V Input Common-Mode Voltage Range VCM For CMRR≥50dB 1.9 1.7 V V+-100 V+-10 mV Output Swing VOUT RL=10kΩ to 1.35V 60 180 mV Supply Current IS All four amplifiers 260 680 μA AC CHARACTERISTICS Gain-Bandwidth Product GBWP CL=200pF 1 MHZ Phase Margin φm 60 Deg Gain Margin Gm 10 dB Input-Referred Voltage Noise en f=1kHZ 46 nV/√HZ Input-Referred Current Noise in f=1kHZ 0.17 pA/√HZ UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 6 QW-R502-A08.b LV324  Preliminary CMOS IC 5V ELECTRICAL CHARACTERISTICS(Cont.) All limits guaranteed for TJ=25°C, V+=5V, V-=0V, VCM=2.0V, VO=V+/2 and RL>1MΩ, unless otherwise specified. Boldface limits apply at the temperature extremes. MIN TYP MAX UNIT PARAMETER SYMBOL TEST CONDITIONS (Note 6) (Note 5) (Note 6) DC CHARACTERISTICS 1.7 7 mV Input Offset Voltage VOS 9 mV Input Offset Voltage Average Drift TCVOS 5 μV/°C 11 250 nA Input Bias Current IB 500 nA 5 50 nA Input Offset Current IOS 150 nA Common Mode Rejection Ratio CMRR 0V≤VCM≤4V 50 65 dB Power Supply Rejection Ratio PSRR 2.7V≤V+≤5V, VO=1V, VCM=1V 50 60 dB 0 -0.2 V Input Common-Mode Voltage Range VCM For CMRR≥50dB 4.2 4 V 15 100 V/mV Large Signal Voltage Gain (Note 7) AV 10 V/mV V+-300 V+-40 mV V+-400 mV RL=2kΩ to 2.5V 120 300 mV 400 mV Output Swing VO V+-100 V+-10 mV V+-200 mV RL=10kΩ to 2.5V 65 180 mV 280 mV Sourching, VO=0V 5 60 mA Output Short Circuit Current IO 10 160 mA Sourching, VO=5V 410 830 μA Supply Current IS All four amplifiers 1160 μA AC CHARACTERISTICS Slew Rate SR (Note 8) 1 V/μs Gain-Bandwidth Product GBWP CL=200pF 1 MHZ Phase Margin φm 60 Deg Gain Margin Gm 10 dB Input-Referred Voltage Noise en f=1kHZ 39 nV/√HZ Input-Referred Current Noise in f=1kHZ 0.21 pA/√HZ Notes: 4. The maximum power dissipation is a function of TJ(MAX), θJA. The maximum allowable power dissipation at any ambient temperature is PD=(TJ(MAX)-TA)/ θJA. All numbers apply for packages soldered directly onto a PC Board. 5. Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material. 6. All limits are guaranteed by testing or statistical analysis. 7. RL is connected to V-. The output voltage is 0.5V≤VO≤4.5V. 8. Connected as voltage follower with 3V step input. Number specified is the slower of the positive and negative slew rates. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 6 QW-R502-A08.b LV324 Preliminary CMOS IC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R502-A08.b