M7612L-S08-R

UNISONIC TECHNOLOGIES CO., M7612 VIDEO SIGNAL SWITCHER DESCRIPTION The UTC M7612 is three-channel analog multiplexes and designed for use in TV and video cassette recorders. It is characterized by a large dynamic range and wide operating frequency range. LINEAR INTEGRATED CIRCUIT SOP-8 FEATURES *3-input / 1-output switches. *Built-in mute 6dB amplifier and 75Ω driver. *Large input impedance (20kΩ Typ.). *Wide operating supply voltage range (4.5V ~ 13.0V for SIP-8 package) (4.5V ~ 9.5V for SOP-8 package). *Low power dissipation (103mW Typ.). *Excellent frequency characteristics (10MHz, 0dB Typ.). *Wide dynamic range (3.5VP-P Typ.). *Low interchannel crosstalk (– 65dB Typ., f = 4.43MHz). SIP-8 *Pb-free plating product number: M7612L ORDERING INFORMATION Ordering Number Normal Lead Free Plating M7612-S08-T M7612L-S08-T M7612-S08-R M7612L-S08-R M7612-G08-T M7612L-G08-T Package SOP-8 SOP-8 SIP-8 Packing Tube Tape Reel Tube www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., 1 QW-R124-004,A M7612 PIN CONFIGURATIONS LINEAR INTEGRATED CIRCUIT SIP-8 IN1 1 SOP-8 8 VOUT UTC M7612 1 IN1 2 CTLA 3 CTLB 4 IN2 5 GND 6 IN3 7 Vcc 8 VOUT CTLA 2 CTLB 3 IN2 4 UTC M7612 7 Vcc 6 IN3 5 GND TRUTH TABLE CTL A L (OPEN) L (OPEN) H H CTL B L (OPEN) H L (OPEN) H OUT IN1 IN2 IN3 MUTE UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 QW-R124-004,A M7612 ABSOLUTE MAXIMUM RATINGS (Ta=25℃) PARAMETER Power Supply Voltage Power Dissipation Operating Temperature Storage Temperature SIP-8 SOP-8 SIP-8 SOP-8 SYMBOL VCC PD TOPR TSTG LINEAR INTEGRATED CIRCUIT RATINGS 13.5 10.0 900 550 0 ~ +70 -40 ~ +150 UNIT V mW ℃ ℃ ELECTRICAL CHARACTERISTICS (Ta=25℃, Vcc=5V, unless otherwise specified.) PARAMETER SIP-8 Operating Voltage Range SOP-8 Supply Current Maximum Output Level Voltage Gain Interchannel Crosstalk Frequency Characteristic Input Impedance CTL Pin Switching Level A CTL Pin Switching Level B *Not designed for radiation resistance. SYMBOL VCC ICC VOM GV CT CF ZIN VTH-A VTH-B f=1kHz, THD=0.5% f=1MHz, VIN=1.0Vp-p f=4.43MHz, VIN=1.0Vp-p f=10MHz/1MHz, VIN=1.0Vp-p TEST CONDITIONS MIN 4.5 4.5 3.0 5.5 -3.0 14 1.0 1.0 TYP MAX 13.0 9.5 29.0 6.5 1.0 26 3.0 3.0 UNIT V V mA Vp-p dB dB dB kΩ V V 20.5 3.5 6.0 -65 0 20 2.0 2.0 MEASUREMENT CONDITIONS PARAMETER Current Dissipation Maximum Output Level Voltage Gain IN1 IN2 IN3 IN1 IN2 IN3 IN1→IN2 IN1→IN3 IN1→MUTE IN2→IN3 IN2→MUTE IN3→MUTE IN1 IN2 IN3 CTL A CTL B SYMBOL ICC VOM VOM VOM GV GV GV CT CT CT CT CT CT GF GF GF VTH VTH SW1 2 1 2 2 1 2 2 1 1 1 2 2 2 1 2 2 2 2 SWITCH SETTINGS SW2 SW3 SW4 2 2 2 3 2 2 3 2 1 2 1 2 3 2 2 3 2 1 2 1 2 3 2 2 2 2 2 2 2 2 2 2 1 2 2 1 2 1 2 3 2 2 3 2 1 2 1 2 2 1 1 1 2 3 SW5 2 3 2 3 3 2 3 2 3 2 3 2 2 3 2 3 3 1 MEASUREMENT METHOD Ammeter f=1kHz, THD=0.5% see Test Notes 2 f=1MHz, V=1Vp-p see Test Notes 3 Interchannel Crosstalk f=4.43MHz, V=1Vp-p see Test Notes 4 Frequency Characteristic CTL Pin Switching Level f=10MHz/f=1MHz V=1Vp-p see Test Notes 5 see Test Notes 6 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 QW-R124-004,A M7612 TEST CIRCUIT LINEAR INTEGRATED CIRCUIT 1000µ + 43 75 V PP UTC M7612 1 2 3 4 5 6 7 8 Vcc A + 1 SW1 2 1µF 1 SW2 2 1µF 1 SW3 2 1µF 47µF 0.022µF OSC 50Ω 1µF OSC OSC 50Ω 1µF 50Ω 1µF 1 SW4 23 1 SW5 23 Vcc Vcc TEST NOTES 1. The output impedance is approximately 32Ω. Therefore, to ensure output matching, connect an external resistor of 43Ω. 2. Connect a distortion meter to the output, and input a f = 1kHz sine wave. Adjust the input level until the output distortion is 0.5%. This output voltage at this time multiplied by 2 is the maximum output level Vom (VP-P). 3. Input a 1VP-P, 1MHz sine wave. The voltage gain is given by GV = 20 log (VOUT / VIN) + 6. 4. Input a 1VP-P, 4.43MHz sine wave. The interchannel crosstalk is given by CT = 20 log (VOUT / VIN). 5. Input 1VP-P, 1MHz and 10MHz sine waves. The frequency characteristic is given by GF= 20 log (VOUT (f = 10MHz) / VOUT (f = 1MHz)). 6. Input a 1VP-P, 1MHz sine wave. Reduce the CTL pin voltage from VCC. The CTL pin switching level (VTH) is the CTL pin voltage at which the VOUT level drops below 20mVP-P. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 QW-R124-004,A M7612 TYPICAL CHARACTERISTIC VIN vs. VOUT caracteristics f=1kHz 8 SIGNAL ATTENUATE LEVEL (dB) 5 OUTPUT VOLTAGE, VOUT (V) Vcc=12V 4 Vcc=9V 3 6 4 2 0 -2 -4 -6 -8 0 1 3 2 4 INPUT VOLTAGE, VIN (V) 5 6 6 LINEAR INTEGRATED CIRCUIT Frequency characteristics Vcc=5V VIN=1Vp-p 2 Vcc=5V 1 100k 1M 10M FREQUENCY (Hz) 100M Interchannel crosstalk Vcc=5V VIN=1Vp-p SIGNAL ATTENUATE LEVEL (dB) 0 -20 -40 -60 -80 100k 10M 1M FREQUENCY (Hz) 100M UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 QW-R124-004,A