MCR100G-6-AD-AE3-R

UNISONIC TECHNOLOGIES CO., LTD MCR100 SCR SENSITIVE GATE SILICON CONTROLLED RECTIFIERS REVERSE BLOCKING THYRISTORS  3 2 1 SOT-223 SOT-23 DESCRIPTION PNPN devices designed for high volume, line-powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection circuits.  1 1 FEATURES 1 SOT-89 TO-92 * Sensitive gate allows triggering by micro controllers and other logic circuits * Blocking voltage to 600V * On-state current rating of 0.8A RMS at 80C * High surge current capability – 10A * Minimum and maximum values of IGT, VGT and IH specified for ease of design * Immunity to dV/dt – 20V/μsec minimum at 110C * Glass-passivated surface for reliability and uniformity  ORDERING INFORMATION Ordering Number Lead Free Halogen Free MCR100G-4-x-AA3-R MCR100G-4-x-AB3-R MCR100G-4-x-AE3-R MCR100L-4-x-T92-B MCR100G-4-x-T92-B MCR100L-4-x-T92-K MCR100G-4-x-T92-K MCR100G-6-x-AA3-R MCR100G-6-x-AB3-R MCR100G-6-x-AE3-R MCR100L-6-x-T92-B MCR100G-6-x-T92-B MCR100L-6-x-T92-K MCR100G-6-x-T92-K MCR100G-8-x-AA3-R MCR100G-8-x-AB3-R MCR100G-8-x-AE3-R MCR100L-8-x-T92-B MCR100G-8-x-T92-B MCR100L-8-x-T92-K MCR100G-8-x-T92-K Note: Pin assignment: G: Gate K: Cathode A: Anode www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd Package SOT-223 SOT-89 SOT-23 TO-92 TO-92 SOT-223 SOT-89 SOT-23 TO-92 TO-92 SOT-223 SOT-89 SOT-23 TO-92 TO-92 Pin assignment 1 2 3 K A G G A K G K A K G A K G A K A G G A K G K A K G A K G A K A G G A K G K A K G A K G A Packing Tape Reel Tape Reel Tape Reel Tape Box Bulk Tape Reel Tape Reel Tape Reel Tape Box Bulk Tape Reel Tape Reel Tape Reel Tape Box Bulk 1 of 6 QW-R301-016.F MCR100  SCR MARKING Package MCR100-4 MCR100-6 MCR100-8 SOT-223 SOT-89 R6G Data Code R6G SOT-23 R8G TO-92 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 6 QW-R301-016.F UNISONIC TECHNOLOGIES CO., LTD MCR100  SCR ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT 200 V Peak Repetitive Off-State Voltage(Note 1) MCR100-4 (TJ=-40 ~ 110°С, Sine Wave, 50 ~ 60Hz; MCR100-6 VDRM,VRRM 400 V Gate Open) MCR100-8 600 V On-Sate RMS Current (Tc=80°С) 180°С Condition Angles IT(RMS) 0.8 A Peak Non-Repetitive Surge Current ITSM 10 A (1/2 cycle, Sine Wave, 60Hz, TJ=25°С) Circuit Fusing Considerations (t=8.3 ms) I2t 0.415 A2 s Forward Peak Gate Power (TA=25°С, Pulse Width 1.0µs) PGM 0.1 W Forward Average Gate Power (TA=25°С, t=8.3ms) PG(AV) 0.1 W Peak Gate Current – Forward (TA=25°С, Pulse Width1.0μs) IGM 1 A Peak Gate Voltage – Reverse (TA=25°С, Pulse Width1.0μs) VGRM 5 V Operating Junction Temperature Range TJ -40 ~ +110 °С (Rated VRRM and VDRM) Storage Temperature Range TSTG -40 ~ +150 °С Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied.  THERMAL DATA PARAMETER Junction to Ambient  SYMBOL SOT-223 SOT-23/SOT-89 TO-92 θJA MAX 180 400 200 UNIT °С/W °С/W °С/W ELECTRICAL CHARACTERISTICS (TJ=25°С, unless otherwise stated) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT OFF CHARACTERISTICS 10 μA Peak Forward or Reverse Blocking TC=25°С VD=Rated VDRM and VRRM; IDRM, IRRM Current RGK=1kΩ TC=125°С 100 μA ON CHARACTERISTICS Peak Forward On-State Voltage (Note 2) VTM ITM=1A Peak @ TA=25°С 1.7 V Gate Trigger Current (Continuous DC)(Note3) IGT VAK=7Vdc, RL=100Ω, TC=25°С 40 200 μA TC=25°С 0.5 5 mA VAK=7Vdc, initiating Holding Current IH current=20mA TC=-40°С 10 mA TC=25°С 0.6 10 mA Latch Current VAK=7V, Ig=200A IL TC=-40°С 15 mA 0.62 0.8 V TC=25°С Gate Trigger Voltage VAK=7Vdc, RL=100Ω VGT (continuous dc) TC=-40°С 1.2 V DYNAMIC CHARACTERISTICS VD=Rated VDRM, Exponential Critical Rate of Rise of Off-State Voltage dV/dt Waveform, RGK=1000Ω, 20 35 V/μs TJ=110°С IPK=20A; Pw=10sec; 50 A/μs Critical Rate of Rise of On-State Current di/dt diG/dt=1A/μsec, Igt=20mA Notes: 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. 2. Indicates Pulse Test Width1.0ms, duty cycle 1%. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 6 QW-R301-016.E MCR100  SCR VOLTAGE CURRENT CHARACTERISTIC OF SCR PARAMETER Peak Repetitive Off Stat Forward Voltage Peak Forward Blocking Current Peak Repetitive Off State Reverse Voltage Peak Reverse Blocking Current Peak On State Voltage Holding Current SYMBOL VDRM IDRM VRRM IRRM VTM IH +Current Anode+ VTM On State IH IRRM at VRRM +Voltage IDRM at VDRM Reverse Blocking Region (off state) Forward Blocking Region (off state) Reverse Avalanche Region Anode-  CLASSIFICATION OF IGT RANK RANGE B 48~105μA C 95~200μA AA 8~16μA UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw AB 14~21μA AC 19~25μA AD 23~52μA 4 of 6 QW-R301-016.F MCR100 TYPICAL CHARACTERISTICS Typical Gate Trigger Current vs. Junction Temperature Typical Gate Trigger Voltage vs. Junction Temperature 100 1.0 90 0.9 80 Gate Trigger Voltage (V) Gate Trigger Current (µA)  SCR 70 60 50 40 30 20 0.8 0.7 0.6 0.5 0.4 0.3 10 -40 -25 -10 5 20 35 50 65 80 95 110 Junction Temperature, TJ (℃) 0.2 -40 -25 -10 5 20 35 50 65 80 95 110 Junction Temperature, TJ (℃) Typical RMS Curent Derating Typical On-State Characteristics 120 10 110 MAXIMUM@T J=25℃ 100 90 80 180° 70 1 MAXIMUM@TJ=110℃ 60 50 40 0 120° 30° 60° 90° 0.1 0.2 0.3 0.5 0.4 RMS On-State Current, IT(RMS) (A) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 0.1 0.5 0.8 1.11.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 Instantaneous On-State Voltage, VT (V) 5 of 6 QW-R301-016.F MCR100 SCR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R301-016.F