MMBT4403-AE3-R

UNISONIC TECHNOLOGIES CO., LTD MMBT4403 PNP GENERAL PURPOSE AMPLIFIER DESCRIPTION The UTC MMBT4403 is designed for use as a general purpose amplifier and switch requiring collector currents up to 500mA. PNP SILICON TRANSISTOR *Pb-free plating product number: MMBT4403L ORDERING INFORMATION Order Number Normal Lead Free Plating MMBT4403-AE3-R MMBT4403-AE3-R Package SOT-23 Pin Assignment 1 2 3 E B C Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd 1 of 5 QW-R206-034,C MMBT4403 PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current-Continuous Total Device Dissipation Derate above 25℃ SYMBOL VCBO VCEO VEBO IC PNP SILICON TRANSISTOR ABSOLUTE MAXIMUM RATING (Ta=25℃, unless otherwise specified) RATINGS UNIT 40 V 40 V 5 V 600 mA 350 mW PC 2.8 mW/℃ Junction Temperature TJ 150 ℃ Storage Temperature TSTG -55 ~ +150 ℃ Note 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. THERMAL CHARACTERISTICS (Ta=25℃, unless otherwise specified) CHARACTERISTIC Thermal Resistance, Junction to Ambient SYMBOL θJA RATINGS 357 UNIT ℃/W ELECTRICAL CHARACTERISTICS (Ta=25℃, unless otherwise specified) PARAMETER OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage (Note) Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cut-off Current Base Cut-off Current ON CHARACTERISTICS* SYMBOL BVCEO BVCBO BVEBO ICEX IBEX hFE1 hFE2 hFE3 hFE4 hFE5 VCE(SAT1) VCE(SAT2) VBE(SAT1) VBE(SAT2) TEST CONDITIONS IC=1mA, IB=0 Ic=0.1mA, IE=0 IE=0.1mA, IC=0 VCE=35V, VEB=0.4V VCE=35V, VBE=0.4V VCE=1V,IC=0.1mA VCE=1V,IC=1mA VCE=1V,IC=10mA VCE=2V, IC=150mA (Note) VCE=2V, IC=500mA (Note) IC=150mA, IB=15mA IC=500mA, IB=50mA IC=150mA, IB=15mA(Note) IC=500mA, IB=50mA 200 8.5 30 15 8 500 100 15 20 225 30 MIN 40 40 5 0.1 0.1 30 60 100 100 20 TYP MAX UNIT V V V µA µA DC Current Gain 300 0.4 0.75 0.95 1.3 V V V V MHz pF pF kΩ ×10-4 µmbos ns ns ns ns Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage 0.75 SMALL SIGNAL CHARACTERISTICS Transition Frequency fT VCE=10V, IC=20mA, f=100MHz Collector-Base Capacitance Ccb VCB=10V, IE=0, f=140kHz Emitter-Base Capacitance Ceb VBE=0.5V, IC=0, f=140kHz Input Impedance hIE VCE=10V, IC=1mA, f=1kHz Voltage Feedback Ratio hRE VCE=10V, IC=1mA, f=1kHz Small-Signal Current Gain hFE VCE=10V, IC=1mA, f=1kHz Output Admittance hOE VCE=10V, IC=1mA, f=1kHz SWITCHING CHARACTERISTICS Delay Time tD VCC=30V, IC=150mA IB1=15mA Rise Time tR Storage Time tS VCC=30V, IC=150mA IB1= IB2=15mA Fall Time tF Note Pulse test: Pulse Width≤300µs, Duty Cycle≤2% 1.5 0.1 60 1.0 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R206-034,C MMBT4403 TEST CIRCUIT -30V 200 Ω 0 ≤220ns PNP SILICON TRANSISTOR -16V 1KΩ 50Ω Figure 1. Saturated Turn-On Switching Timer 1.5V -6V Note: BVEBO=5V 0 ≤220ns 1k 1KΩ 50Ω 37Ω -30V Figure 2. Saturated Turn-Off Switching Timer UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 5 QW-R206-034,C MMBT4403 TYPICAL CHARACTERISTICS DC Current Gain vs. Collector Current VCE =5V 125℃ Collector-Emitter Voltage, VCE(SAT) (V) PNP SILICON TRANSISTOR Collector-Emitter Saturation Voltage vs. Collector Current 0.5 β=10 0.4 25℃ 0.3 0.2 0.1 -40℃ 0 1 10 100 Collector Current, IC (mA) 500 500 DC Current Gain, hFE 400 300 200 100 25℃ -40℃ 1 3 10 30 100 300 Collector Current, IC (mA) 125℃ 0 0.1 0.3 Base-Emitter Voltage, VBE(SAT) (V) Base-Emitter OnVoltage, VBE(ON )(V) 100 Collector-Cutoff Current vs. Ambient Temperature VCB=35V 10 16 12 1 8 0.1 0.01 25 Cob 4 50 75 100 125 Ambient Temperature, TA (℃) 0 -0.1 Cib 20 Input and Output Capacitance vs. Reverse Bias Voltage -1 -10 -50 Reverse Bias Voltage (V) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R206-034,C MMBT4403 PNP SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R206-034,C