MPSA42

UNISONIC TECHNOLOGIES CO., LTD MPSA42/43 HIGH VOLTAGE TRANSISTOR 1 NPN SILICON TRANSISTOR DESCRIPTION The UTC MPSA42/43 are high voltage transistors, designed for telephone switch and high voltage switch. SOT-89 FEATURES *Collector-Emitter voltage: VCEO=300V(UTC MPSA42) VCEO=200V(UTC MPSA43) *High current gain *Complement to UTC MPSA92/93 1 TO-92 *Pb-free plating product number: MPSA42L MPSA43L ORDERING INFORMATION Order Number Normal Lead Free Plating MPSA42-AB3-R MPSA42L-AB3-R MPSA42-T92-B MPSA42L-T92-B MPSA42-T92-K MPSA42L-T92-K MPSA43-AB3-R MPSA43L-AB3-R MPSA43-T92-B MPSA43L-T92-B MPSA43-T92-K MPSA43L-T92-K Package SOT-89 TO-92 TO-92 SOT-89 TO-92 TO-92 Pin Assignment 1 2 3 B C E E B C E B C B C E E B C E B C Packing Tape Reel Tape Box Bulk Tape Reel Tape Box Bulk MPSA42L-AB3-R (1)Packing Type (2)Package Type (3)Lead Plating (1) B: Tape Box, K: Bulk, R: Tape Reel (2) AB3: SOT-89, T92: TO-92 (3) L: Lead Free Plating, Blank: Pb/Sn www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd 1 of 3 QW-R208-034,B MPSA42/43 PARAMETER SYMBOL Collector-Base Voltage MPSA42 MPSA43 MPSA42 MPSA43 NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (Operating temperature range applies unless otherwise specified) RATINGS UNIT 300 V VCBO 200 V Collector-Emitter Voltage 300 V VCEO 200 V Emitter-Base Voltage VEBO 6 V Collector Current Ic 500 mA SOT-89 500 mW Collector Dissipation (Ta=25℃) Pc TO-92 625 mW Junction Temperature TJ 150 °C Storage Temperature TSTG -55 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TJ =25°C, unless otherwise specified) PARAMETER Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cut-Off Current Emitter Cut-Off Current SYMBOL MPSA42 MPSA43 MPSA42 MPSA43 MPSA42 MPSA43 MPSA42 MPSA43 BVCBO BVCEO BVEBO ICBO IEBO hFE VCE(SAT) VBE(SAT) fT MPSA42 MPSA43 Ccb TEST CONDITIONS Ic=100µA, IE=0 Ic=1mA, IB=0 IE=100µA, Ic=0 VCB=200V, IE=0 VCB=160V, IE=0 VBE=6V, Ic=0 VBE=4V, Ic=0 VCE=10V, Ic=1mA VCE=10V, Ic=10mA VCE=10V, Ic=30mA Ic=20mA, IB=2mA Ic=20mA, IB=2mA VCE=20V, Ic=10mA, f=100MHz VCB=20V, IE=0 f=1MHz MIN 300 200 300 200 6 TYP MAX UNIT V V V nA nA 100 100 100 100 80 80 80 300 0.2 0.90 50 3 4 DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Current Gain Bandwidth Product Collector Base Capacitance V V MHz pF pF UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R208-034,B MPSA42/43 TYPICAL CHARACTERISTICS Fig.1 DC Current Gain 10 3 10 1 NPN SILICON TRANSISTOR Fig.2 Saturation Voltage Ic=10*IB VCE=10V DC Current Gain, hFE V CE(SAT) ,VBE(SAT) ( V) 2 0 10 10 VBE(SAT ) 10 1 -1 10 VCE(SAT ) 10 0 10 0 10 1 10 2 -2 10 10 -1 10 0 10 1 10 2 10 3 Collector Current, Ic(mA) Collector Current, Ic(mA) Fig.3 Capacitance Current Gain Bandwidth Product (MHz) 10 2 10 3 Fig.4 Current Gain Bandwidth Product IE=0 f=1MHz VCE=20V 10 1 10 2 10 10 -1 10 0 10 1 10 2 1 10 0 10 1 10 2 Collector-Base Voltage(V) Collector Current, Ic(mA) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R208-034,B