UNISONIC TECHNOLOGIES CO., LTD OPA2336
SINGLE-SUPPLY, MICROPOWER CMOS OPERATIONAL AMPLIFIERS
DESCRIPTION
The UTC OPA2336 is a CMOS operational amplifier. It is operated on a 2.1V (Min.) single supply. A100kΩ load is driven by the rail-to-rail output and the accuracy of the output voltage is ensured at ± 3mV. The UTC OPA2336 is characterized by its low quiescent current (20μA/amplifier), low offset voltage (125μV max), low input bias current (1pA), and high open-loop gain (115dB). The UTC OPA2336 features completely independent circuitry for lowest crosstalk and freedom from interaction. The UTC OPA2336 is particularly designed for battery-powered applications and the common-mode range extending to the negative supply makes it ideal for single-supply applications. In addition to the applications mentioned above, the UTC OPA2336 is suitable for portable devices, high-Impedance applications, photodiode, pre-amps, precision integrators, medical instruments, and test equipment.
Preliminary
CMOS IC
FEATURES
* Operating on a Single-Supply * Rail-to-Rail Output (Accuracy: ± 3mv) * Low Power Dissipation: IQ=20μA/Amplifier * Low Offset Voltage up to 125μV (MAX.) * Power Supply Specified from 2.3V to 5.5V * Halogen Free
ORDERING INFORMATION
Ordering Number OPA2336G-S08-R Package SOP-8 Packing Tape Reel
www.unisonic.com.tw Copyright © 2010 Unisonic Technologies Co., Ltd
1 of 6
QW-R502-392.a
OPA2336
PIN CONFIGURATION
Preliminary
CMOS IC
Out A -In A +In A V-
1 2 3 4 A + B + -
8 7 6 5
V+ Out B -In B +In B
PIN DESCRIPTION
PIN NO. 1 2 3 4 5 6 7 8 PIN NAME OUTA -In A +In A V+In B -in B Out B V+ DESCRIPTION Output of channel A Negative Input of channel A Positive Input of channel A Ground Positive Input of channel B Negative Input of channel B Output of channel B Power supply
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 6
QW-R502-392.a
OPA2336
ABSOLUTE MAXIMUM RATING
Preliminary
CMOS IC
PARAMETER SYMBOL RATINGS UNIT Supply Voltage VS 7.5 V Signal Input Terminals Voltage (Note 2) VIT (V-)-0.3~(V+)+0.3 V Signal Input Terminals Current (Note 2) IIT 10 mA Output Short-Circuit (Note 3) IOS Continuous A Operating Junction Temperature TOPR -40~ +125 °C Storage Temperature TSTG -55~ +125 °C Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Input terminals are diode-clamped to the power supply rails. Input signals that can swing more than 0.3V beyond the supply rails should be current-limited to 10mA or less. 3. Short-circuit to ground, one amplifier per package.
THERMAL DATA PARAMETER Junction to Ambient SYMBOL
θJA
RATINGS
150
UNIT
°C/W
ELECTRICAL CHARACTERISTICS
(At TA=+25°C, VS=+5V,RL=25kΩ connected to VS/2, unless otherwise specified.) PARAMETER OFFSET VOLTAGE Input Offset Voltage Input Offset Voltage vs. Temperature Input Offset Voltage vs. Power Supply Over Temperature Channel Separation, DC INPUT BIAS CURRENT Input Bias Current Over Temperature Input Offset Current NOISE Input Voltage Noise, f = 0.1 ~ 10Hz Input Voltage Noise Density, f = 1kHz Current Noise Density, f = 1kHz INPUT VOLTAGE RANGE Common-Mode Voltage Range Common-Mode Rejection Ratio Over Temperature INPUT IMPEDANCE Differential Common-Mode OPEN-LOOP GAIN Open-Loop Voltage Gain Over Temperature Open-Loop Voltage Gain Over Temperature AOL AOL RL=25kΩ, 100mV
很抱歉,暂时无法提供与“OPA2336G-S08-R”相匹配的价格&库存,您可以联系我们找货
免费人工找货