SK8552L-G03-D-K

UNISONIC TECHNOLOGIES CO., LTD SK8552 LOW VOLTAGE OPERATION HALL IC DESCRIPTION SK8552 is a semiconductor integrated circuit utilizing the Hall effect. It has been so designed as to operate in the alternating magnetic field especially at low supply voltage and operation over extended temperature ranges to +125℃.This Hall IC is suitable for application to various kinds of sensors, contact-less switches, and the like. LINEAR INTEGRATED CIRCUIT 1 SIP-3 3 2 1 FEATURES * Wide supply voltage range of 3V to 20V * Wide temperature operation range of -20℃~+125℃ * TTL and MOS IC are directly drivable by the output * The life is semipermanent because it employs contactless parts * SIP-3 , SOT-25 package * Equipped with an output pull-up resistor ( typical 20kΩ) 5 4 SOT-25 *Pb-free plating product number: SK8552L APPLICATION * Position sensor * Contact-less sensor * Detection of cover (open/close) ORDERING INFORMATION Order Number Pin Assignment Package Normal Lead Free Plating 1 2 3 4 5 SK8552-AF5-0-R SK8552L-AF5-0-R SOT-25 G G O I N SK8552-G03-D-K SK8552L-G03-D-K SIP-3 I G O Note: Pin Assignment: I:VCC O:VOUT G:GND N: No Connection SK8552L-AF5-0-R (1)Packing Type (2)Pin Assignment (3)Package Type (4)Lead Plating (1) K: Bulk, R: Tape Reel (2) refer to Pin Assignment (3) AF5: SOT-25, G03: SIP-3 (4) L: Lead Free Plating, Blank: Pb/Sn Packing Tape Reel Bulk www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd 1 of 5 QW-R118-006,A SK8552 MARK INFORMATION SIP-3 8552 L: Lead Free Plating Blank: Pb/Sn , LINEAR INTEGRATED CIRCUIT SOT-25 8552 L: Lead Free Plating Blank: Pb/Sn , BLOCK DIAGRAM Vcc R EGULATOR OUTPUT CONTROL BLOCK HALL SENSOR BLOCK GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R118-006,A SK8552 ABSOLUTE MAXIMUM RATINGS (Ta = 25℃) PARAMETER Supply Voltage Supply Current Output Current LINEAR INTEGRATED CIRCUIT RATINGS UNIT 3~20 V 10 mA 10 mA SIP 400 mW Power Dissipation PD SOT 200 mW Junction Temperature TJ +125 °C Operating Temperature TOPR -20~ +125 °C Storage Temperature TSTG -55~+150 °C Note 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. The device is guaranteed to meet performance specification within 0℃~+70℃ operating temperature range and assured by design from -20℃~+125℃. SYMBOL VCC ICC IOUT ELECTRICAL CHARACTERISTICS (Ta = 25℃) PARAMETER Output voltage SH Output voltage NH Output voltage SL Output voltage NL Output current 1 Output current 2 Supply current SYMBOL CONDITIONS VOHS VCC =3V,IOUT =-10µA,B=100G VOHN VCC =3V,IOUT =-10µA,B=-100G VOLS VCC =3V, IOUT =1mA,B=5G VOLN VCC =3V, IOUT =1mA,B=-5G IOHS VCC =3V,VOUT =3V , B=100G IOHN VCC =3V,VOUT =3V , B=-100G ICC VCC =3V, B=5G TR Output switching time TF MAGNETIC CHARACTERISTICS (over operating supply voltage range) Operating magnetic flux density BHLS VCC =3V Operating magnetic flux density BHLN VCC =3V Operating magnetic flux density BLHS VCC =3V Operating magnetic flux density BLHN VCC =3V MIN TYP 2.8 2.8 MAX UNIT 3 V 3 V 0.7 V 0.7 V mA mA mA µS µS G G G G 10 10 5 5 1 -20 20 -100 100 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 5 QW-R118-006,A SK8552 PACKAGE INFORMATION LINEAR INTEGRATED CIRCUIT SIP-3 4.1 mm 0.95 mm SOT-25 0.385 mm 2.01 mm 3.0 mm 1.00 mm Fig. 1 SENSOR LOCATIONS Output Voltage BLHS BLHN Bw Bw BHLS BHLN Applied magnetic flux density B Fig. 2 OPERATING MAGNETIC FLUX DENSITY UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R118-006,A SK8552 TYPICAL APPLICATION CIRCUIT Vcc LINEAR INTEGRATED CIRCUIT PIN 4 PIN 1 Vcc SK8552 PIN 5 GND PIN 2 OUTPUT PIN 3 μP U TC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R118-006,A