TIP41CL-C-TA3-T

UNISONIC TECHNOLOGIES CO., LTD TIP41C NPN PLANAR TRANSISTOR NPN EXPITAXIAL PLANAR TRANSISTOR  DESCRIPTION The UTC TIP41C is a NPN expitaxial planar transistor, designed for using in general purpose amplifier and switching applications.  FEATURE * Complement to TIP42C  SYMBOL  ORDERING INFORMATION Ordering Number Package Lead Free Halogen Free TIP41CL-x-TA3-T TIP41CG-x-TA3-T TO-220 TIP41CL-x-TF3-T TIP41CG-x-TF3-T TO-220F TIP41CL-x-TN3-T TIP41CG-x-TN3-T TO-252 TIP41CL-x-TN3-R TIP41CG-x-TN3-R TO-252 Note: Pin Assignment: B: Base C: Collector E: Emitter  Pin Assignment 1 2 3 B C E B C E B C E B C E Packing Tube Tube Tube Tape Reel MARKING www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd 1 of 3 QW-R203-008.J TIP41C  NPN PLANAR TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TC=25C, unless otherwise specified) PARAMETER Collector Base Voltage Collector to Emitter Voltage Emitter-Base Voltage RATING UNIT 100 V 100 V 5 V DC 6 A Collector Current IC Pulse 10 A Base Current IB 2 A TO-220 65 TC=25C TO-220F W 22 TO-252 25 PC Collector Dissipation TO-220 2 TA=25C TO-220F W 0.7 TO-252 0.75 Junction Temperature TJ 150 C Storage Temperature TSTG -65 ~ +150 C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied.  SYMBOL VCBO VCEO VEBO ELECTRICAL CHARACTERISTICS (TC=25C, unless otherwise specified) PARAMETER Emitter Base Breakdown Voltage Collector Base Breakdown Voltage Collector Emitter Sustaining Voltage (Note) Collector Cutoff Current Collector Cutoff Current Emitter Cutoff Current Collector-Emitter Saturation Voltage (Note) Base-Emitter On Voltage (Note) SYMBOL BVEBO BVCBO BVCEO ICEO ICES IEBO VCE(SAT) VBE(ON) hFE1 DC Current Gain (Note) hFE2 Current Gain Bandwidth Product fT Note: Pulse Test: PW≦300μs, Duty Cycle≦2%  TEST CONDITIONS IE=100μA, IC=0 IC=100μA, IE=0 IC=30mA, IB=0 VCE=60V, IB=0 VCE=100V, VEB=0 VEB=5V, IC=0 IC=6A, IB=600mA IC=6A, VCE=4V IC=300mA, VCE=4V IC=3A, VCE=4V VCE=10V, IC=500mA, f=1MHz MIN 5 100 100 30 15 3 TYP MAX UNIT V V V 0.7 mA 400 μA 1 mA 1.5 V 2.0 V 75 MHz CLASSIFICATION OF hFE2 RANK RANGE A 15~30 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw B 28~48 C 45~75 2 of 3 QW-R203-008.J TIP41C Dc Current Gain, hFE Saturation Voltage, VBE(SAT), VCE(SAT) (mV) TYPICAL CHARACTERISTICS Collector Current, IC (A)  NPN PLANAR TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R203-008.J