U74LVC2G14

UNISONIC TECHNOLOGIES CO., LTD U74LVC2G14 DUAL SCHMITT-TRIGGER INVERTER WITH 5V TOLERANT INPUT DESCRIPTION The UTC U74LVC2G14 is a high-performance, low-power, low-voltage, Si-gate CMOS device which provides two inverters with Schmitt trigger action. It is capable of transforming slowly changed input signals into sharply defined, jitter-free output signals. CMOS IC FEATURES * Operate From 1.65V to 5.5V * 5V tolerant input/output for interfacing with 5V logic *±24mA output drive (VCC =3.3V) * CMOS low-power consumption and high noise immunity * Halogen Free ORDERING INFORMATION Ordering Number U74LVC2G14G-AL6-R Package SOT-363 Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2009 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-355.A U74LVC2G14 PIN CONFIGURATION CMOS IC FUNCTION TABLE INPUT(A) L H H=High level L=Low Level OUTPUT(Y) H L LOGIC SYMBOL FUNCTIONAL DIAGRAM 1A 1Y 2A 2Y UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-355.A U74LVC2G14 ABSOLUTE MAXIMUM RATING PARAMETER Supply Voltage Input Voltage Output Voltage high-impedance power-off High State Low State SYMBOL VCC VIN VOUT -0.5 ~VCC+0.5 RATINGS -0.5 ~ +6.5 -0.5 ~ +6.5 -0.5 ~ 6.5 CMOS IC UNIT V V V V VCC or GND Current ICC ±100 mA Continuous Output Current IO ±50 mA Input Clamp Current IIK -50 mA Output Clamp Current IOK -50 mA Storage Temperature TSTG -65 ~ + 150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient SYMBOL θJA MIN TYP MAX 259 UNIT °C/W RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Positive-going input threshold voltage SYMBOL VCC TEST CONDITIONS VCC=1.65V VCC=2.3V VCC=3V VCC=4.5V VCC=5.5V VCC=1.65V VCC=2.3V VCC=3V VCC=4.5V VCC=5.5V VCC=1.65V VCC=2.3V VCC=3V VCC=4.5V VCC=5.5V High or low state VCC =1.65V VCC =2.3V VCC =3V VCC =3V VCC =4.5V VCC =1.65V VCC =2.3V VCC =3V VCC =3V VCC =4.5V MIN 1.65 0.70 1.00 1.30 1.90 2.20 0.30 0.40 0.60 1.10 1.40 0.30 0.40 0.40 0.60 0.70 0 0 TYP MAX UNIT 5.5 V 1.40 V 1.70 V 2.20 V 3.10 V 3.70 V 0.70 V 1.00 V 1.30 V 2.00 V 2.50 V 0.80 V 0.90 V 1.10 V 1.30 V 1.40 V 5.5 V VCC V -4 mA -8 mA -16 mA -24 mA -32 mA 4 mA 8 mA 16 mA 24 mA 32 mA 85 °C VT+ Negative-going input threshold voltage VT- Hysteresis voltage(VT+ - VT-) ΔVT Control Input Voltage Output Voltage VIN VOUT High level output current IOH Low level output current IOL Operating Temperature TOPR -40 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 5 QW-R502-355.A U74LVC2G14 ELECTRICAL CHARACTERISTICS (Ta=25°C , unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS VCC=1.65~5.5V, IOH=-100uA High-Level Output Voltage VOH VCC=1.65V, IOH=-4mA VCC=2.3V, IOH=-8mA VCC=3V, IOH=-16mA VCC=3V, IOH=-24mA VCC=4.5V, IOH=-32mA VCC=1.65~5.5V, IOL =100uA VCC=1.65V, IOL =4mA VCC=2.3V, IOL =8mA VCC=3V, IOL =12mA VCC=3V, IOL =24mA VCC=4.5V, IOL =32mA VCC=0V to 5.5V, VIN=0 or 5.5V VCC=0V, VIN or VOUT=5.5V, VCC=1.65V to 5.5V, IOUT=0 VIN=5.5V or GND VCC=3V to 5.5V One input at VCC-0.6V, Other inputs at VCC or GND, IOUT =0 VCC=3.3V, VIN =VCC or GND MIN VCC -0.1 1.20 1.90 2.40 2.30 3.80 CMOS IC TYP MAX UNIT V V V V V V V V V V V V μA μA μA μA pF Low-Level Output Voltage VOL Input Leakage Current Power OFF Leakage Current Quiescent Supply Current Additional Quiescent Supply Current Per Pin Input Capacitance II(LEAK) IOFF ICC ΔICC CI 0.10 0.45 0.30 0.40 0.55 0.55 ±5 ±10 0.1 10 500 4 SWITCHING CHARACTERISTICS (see TEST CIRCUIT AND WAVEFORMS) PARAMETER SYMBOL TEST CONDITIONS VCC =1.8V±0.15V, VIN=VCC CL=30pF, RL=1KΩ VCC=2.5V±0.2V, VIN=VCC CL=30pF, RL=500Ω VCC =3.3V±0.3V, VIN=3V CL=50pF, RL=500Ω VCC=5V±0. 5V, VIN=VCC CL=50pF, RL=500Ω MIN 3.90 1.90 2.00 1.5 TYP MAX UNIT 9.50 5.70 5.40 4.3 ns ns ns ns Propagation delay from input (nA) to output(nY) tPLH tPHL OPERATING CHARACTERISTICS (Ta=25°С) PARAMETER Power Dissipation Capacitance SYMBOL Cpd TEST CONDITIONS VCC=1.8V,f=10MHz VCC=2.5V,f=10MHz VCC=3.3V,f=10MHz VCC=5V,f=10MHz MIN TYP MAX UNIT 16 pF 17 pF 18 pF 21 pF UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R502-355.A U74LVC2G14 TEST CIRCUITS AND WAVEFORMS CMOS IC VCC 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0. 5V Inputs VIN VCC VCC 3V VCC VIN VM nA input tPHL nY output VM tR, tF ≤2ns ≤2ns ≤2.5ns ≤2.5ns VM VCC/2 VCC/2 1.5V VCC/2 CL 30pF 30pF 50pF 50pF RL 1kΩ 500Ω 500Ω 500Ω VM 0V tPLH VOH VM VOL PROPAGATION DELAY TIMES Notes: 1. CL includes probe and jig capacitance. 2. All input pulses are supplied by generators having the following characteristics: PRR≤1MHz, ZO = 50Ω: tr≤2ns, tf ≤2ns (VCC=1.8V±0.15V and VCC=2.5V±0.2V) tr ≤2.5ns, tf ≤2.5ns (VCC =3.3V±0.3V and VCC=5V±0. 5V) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-355.A