UPG25N120

UNISONIC TECHNOLOGIES CO., LTD UPG25N120 Insulated Gate Bipolar Transistor 1200V, SMPS N-CHANNEL IGBT  DESCRIPTION The UTC UPG25N120 is a N-channel IGBT. it uses UTC’s advanced technology to provide customers with high input impedance, high switching speed and low conduction loss, etc. The UTC UPG25N120 is suitable for high voltage switching, high frequency switch mode power supplies.  FEATURES * VCE(SAT) ≤ 2.8V @ IC=25A, VGE=15V * 1200V Switching SOA Capability * High switching speed * High input impedance * Low conduction loss  SYMBOL 2.Collector 1.Gate 3.Emitte  ORDERING INFORMATION Ordering Number Package Lead Free Halogen Free UPG25N120L-T47-T UPG25N120G-T47-T TO-247 Note: Pin Assignment: G: Gate C: Collector E: Emitter  Pin Assignment 1 2 3 G C E Packing Tube MARKING www.unisonic.com.tw Copyright © 2022 Unisonic Technologies Co., Ltd 1 of 7 QW-R234-006 C UPG25N120  Insulated Gate Bipolar Transistor ABSOLUTE MAXIMUM RATINGS (TC=25°C, unless otherwise specified) PARAMETER Collector-Emitter Voltage Gate to Emitter Voltage Continuous RATINGS UNIT 1200 V ±20 V TC=25°C 50 A Continuous Collector Current IC TC=100°C 25 A Collector Current Pulsed (Note 2) ICM 100 A Power Dissipation 350 W PD Junction Temperature TJ -55 ~ +150 °C Storage Temperature Range TSTG -55 ~ +150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Repetitive Rating: Pulse width limited by maximum junction temperature.  THERMAL DATA PARAMETER Junction to Case  SYMBOL VCES VGES SYMBOL θJC RATINGS 0.35 UNIT °C/W ELECTRICAL CHARACTERISTICS (TJ=25°C, unless otherwise specified) PARAMETER Collector-Emitter Breakdown Voltage Collector-Emitter Leakage Current SYMBOL TEST CONDITIONS BVCES IC=250µA, VGE=0V ICES VCE=1200V, VGE=0V TJ=25°C Collector-Emitter Saturation Voltage VCE(SAT) IC=25A, VGE=15V TJ=150°C Gate to Emitter Threshold Voltage VGE(TH) IC=250µA, VCE=VGE Gate to Emitter Leakage Current IGES VCE=0V, VGE=15V Input Capacitance CIES VCE=25V, VGE=0V, f=1MHz Output Capacitance COES Reverse Transfer Capacitance CRES Total Gate Charge QG IC=25A, VCE=100V, VGE=15V Gate-Emitter Charge QGE Gate-Collector Charge QGC Current Turn-On Delay Time tD(ON) Current Rise Time tR IC=25A, VCE=100V, VGE=15V, RG=10Ω Current Turn-Off Delay Time tD(OFF) Current Fall Time tF SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS Forward Voltage Drop VFM IF=25A Reverse Recovery Time trr IF=25A, dI/dt=100A/μS Reverse Recovery Charge Qrr Note: Pulse Test: Pulse width≦50μs. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 1200 V 200 µA 2.3 2.8 V 2.65 V 4.0 6.5 V ±400 nA 1600 pF 180 pF 50 pF 126 nC 27 nC 45 nC 16 ns 27 ns 92 ns 75 ns 2.1 210 0.35 V ns μC 2 of 7 QW-R234-006 C UPG25N120  Insulated Gate Bipolar Transistor TEST CIRCUIT AND WAVEFORMS 90% 10% VGE RL=1Ω VCE RG=25Ω 90% + - ICE VDD Fig 1. INDUCTIVE SWITCHING TEST CIRCUIT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 10% td(OFF)I tfI trI td(ON)I Fig 2. SWITCHING TEST WAVEFORMS 3 of 7 QW-R234-006 C UPG25N120  Insulated Gate Bipolar Transistor TYPICAL CHARACTERISTICS UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 7 QW-R234-006 C UPG25N120  Insulated Gate Bipolar Transistor TYPICAL CHARACTERISTICS (Cont.) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 7 QW-R234-006 C UPG25N120  Insulated Gate Bipolar Transistor TYPICAL CHARACTERISTICS (Cont.) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 7 QW-R234-006 C UPG25N120  Insulated Gate Bipolar Transistor TYPICAL CHARACTERISTICS (Cont.) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 7 QW-R234-006 C