UT2316L-AE3-R

UNISONIC TECHNOLOGIES CO., LTD UT2316 N-CHANNEL ENHANCEMENT MODE DESCRIPTION The UTC UT2316L is N-channel enhancement mode Power MOSFET, designed in serried ranks with fast switching speed, low on-resistance, favorable stabilization. Used in commercial and industrial surface mount applications and suited for low voltage applications such as DC/DC converters. Power MOSFET SYMBOL 3.Drain 2.Gate *Pb-free plating product number: UT2316L 1.Source ORDERING INFORMATION Ordering Number Normal Lead Free Plating UT2316-AE3-R UT2316L-AE3-R Package SOT-23 Pin Assignment 1 2 3 S G D Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2007 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-126.A UT2316 ABSOLUTE MAXIMUM RATINGS (Ta = 25℃, unless otherwise specified) PARAMETER Drain-Source Voltage Gate-Source Voltage Continuous Drain Current (Note 3) Pulsed Drain Current (Note 1, 2) Total Power Dissipation (Ta=25℃) Power MOSFET SYMBOL RATING UNITS VDS 30 V VGS ±20 V ID 3.6 A IDM 16 A PD 0.96 W ℃ Junction Temperature TJ +150 ℃ Storage Temperature TSTG -55 ~ +150 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient (Note 3) SYMBOL θJA MIN TYP MAX 175 UNIT ℃/W ELECTRICAL CHARACTERISTICS (TJ=25℃, unless otherwise specified) PARAMETER OFF CHARACTERISTICS Drain-Source Breakdown Voltage Drain-Source Leakage Current Gate-Source Leakage Current ON CHARACTERISTICS Gate Threshold Voltage On-State Drain Current Drain-Source On-State Resistance (Note 2) SYMBOL BVDSS IDSS IGSS VGS(TH) ID(ON) RDS(ON) TEST CONDITIONS VGS=0V, ID=250µA VDS=24V, VGS=0V VDS=0V, VGS=±20V VDS=VGS, ID=250µA VDS = 4.5V, VGS = 10V VDS = 4.5V, VGS = 4.5V VGS=10V, ID=3.4A VGS=4.5V, ID=2.6A MIN 30 1 ±100 0.8 6 4 42 68 215 90 55 9 9 14 6 4.3 0.65 1.2 0.88 0.8 15 15 20 12 7 50 85 TYP MAX UNITS V µA nA V A A mΩ mΩ pF pF pF ns ns ns ns nC nC nC V A DYNAMIC CHARACTERISTICS Input Capacitance CISS VDS=15V,VGS=0V, f=1.0MHz Output Capacitance COSS Reverse Transfer Capacitance CRSS SWITCHING CHARACTERISTICS Turn-ON Delay Time tD(ON) VDD=15V, VGS=10V, ID≒1A, Turn-ON Rise Time tR RG=6Ω, RL=15Ω Turn-OFF Delay Time tD(OFF) Turn-OFF Fall Time tF Total Gate Charge QG VDS=15V, VGS=10V, ID=3.6A Gate-Source Charge QGS Gate-Drain Charge QGD SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS Drain-Source Diode Forward Voltage(Note2) VSD VGS=0V, IS=0.8A Maximum Continuous Drain-Source Diode IS VD=VG=0V, VS=1.2V Forward Current Notes: 1. Pulse width limited by TJ(MAX) 2. Pulse width ≤300us, duty cycle ≤2%. 3. Surface mounted on 1 in2 copper pad of FR4 board 1.2 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R502-126.A UT2316 TYPICAL CHARACTERISTICS Typical Output Characteristics 16 14 Drain Current, ID (A) 12 10 8 6 4 2 0 0 2 4 6 8 2V 10 3V 4V VGS=10 thru 5V 16 14 Drain Current, ID (A) 12 10 8 6 4 2 0 0 1 Power MOSFET Transfer Characteristics TC=125℃ 25℃ -55℃ 2 3 4 5 Drain-to-Source Voltage, VDS (V) Gate-to-Source Voltage, VDS (V) 0.5 On-Resistance vs. Drain Current 350 300 Capacitance On-Resistance, RDS(ON) (Ω) 0.4 Capacitance, C (pF) 250 CISS 200 150 100 50 0 0 2 4 6 8 10 12 14 16 0 Drain Current, ID (A) 5 20 25 10 15 Drain-to-Current Voltage, VDS (V) 30 COSS CRSS 0.3 0.2 VGS=4.5V VGS=10V 0.0 0.1 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 4 QW-R502-126.A UT2316 TYPICAL CHARACTERISTICS(Cont.) Power MOSFET Normalized Thermal Transient Impedance 2 Duty Cycle=0.5 Normalized Effective Transient Thermal Impedance 1 0.2 0.1 PDM 0.1 0.05 t1 t2 1.Duty Cycle D=t1/t2 2.Per Unit Base=RthJA=80℃/W 3.TJM-TA=PDMZthJA 4.Surface Mounted 100 600 0.02 Single Pulse 0.01 10-4 10-3 10-1 1 10 10-2 Square Wave Pulse Duration (sec) U TC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw On-Resistance, RDS(ON) (Ω) Source Current, IS (A) 4 of 4 QW-R502-126.A