UTCM2100

UTC M2100 LINEAR INTEGRATED CIRCUIT SINGLE OPERATIONAL AMPLIFIER DESCRIPTION The UTC M2100 is a low supply voltage and low saturation output voltage (+-2.0V p-p at supply voltage +-2.5V) operational amplifier. It is applicable to handy type CD, radio cassette CD, and portable DAT, that are digital audio apparatus which require the 5V single supply operation and high output voltage. SOP-8 TSSOP-8 FEATURES *Single Supply Operation *Operating Voltage (+-1.0V~+-3.5V) *Low Saturation Output Voltage *High Slew Rate (4V/ µs typ.) *Package Outline *Bipolar Technology DIP-8 PIN CONFIGURATION A OUTPUT 1 A -+ 8 V+ A -INPUT 2 B +- 7 B OUTPUT A +INPUT 3 6 B -INPUT V- 4 5 B +INPUT UTC UNISONIC TECHNOLOGIES CO., LTD. 1 QW-R105-011,B UTC M2100 BLOCK DIAGRAM LINEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATINGS (Ta=25°C) PARAMETER Supply Voltage Differential Input Voltage Power Dissipation Operating Temperature Range Storage Temperature Range SYMBOL V+/VVID PD Topr Tstg VALUE +-3.5 +-7 500 (DIP8) 300 (SOP8) 250 (TSSOP8) -20~+75 -40~+125 UNIT V V mW °C °C ELECTRICAL CHARACTERISTICS (Ta=25°C) (V+=5V, Ta=25°C, unless otherwise specified) PARAMETER Input Offset Voltage Input Bias Current Large Signal Voltage Gain Maximum Output Voltage Swing Input Common Mode Voltage Range Common Mode Rejection Ratio Supply Voltage Rejection Ratio Operating Current Slew Rate Gain-Bandwidth product SYMBOL VIO IIB Av VOM VICM CMR SVR Icc SR GB TEST CONDITIONS Rs=10kΩ RL>=2.5kΩ MIN TYP. 1 100 80 +-2.2 74 80 3.5 4 12 MAX 6 300 UNIT mV nA dB V V dB dB mA V/µS MHz 60 +-2 +-1.5 60 60 VIN=0,RL=∞ Av=1,VIN=+-1V f=10kHz 5 NOTE1: Applied circuit voltage gain is desired to be operated within the range of 3 dB to 30dB. NOTE2: Special care being required for input common mode voltage range and the oscillation due to the capacitive load when operating on voltage follower. NOTE3: Special care being required for the oscillation, yet having the gain when the supply voltage is applied at more than 5V (single supply voltage 5V) UTC UNISONIC TECHNOLOGIES CO., LTD. 2 QW-R105-011,B UTC M2100 LINEAR INTEGRATED CIRCUIT TYPICAL CHARACTERISTICS UTC UNISONIC TECHNOLOGIES CO., LTD. 3 QW-R105-011,B UTC M2100 LINEAR INTEGRATED CIRCUIT UTC UNISONIC TECHNOLOGIES CO., LTD. 4 QW-R105-011,B UTC M2100 LINEAR INTEGRATED CIRCUIT UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UTC UNISONIC TECHNOLOGIES CO., LTD. 5 QW-R105-011,B