CO601E58

Clipped-Sine & HCMOS OCXO Oven Controlled Crystal Oscillator • • • • Low power consumption Excellent temperature stabilities High stability AT-cut crystal Fast warm-up CO601 Specifications: Frequency Range: Operating Temperature: 2.0 MHz or 150.0 MHz 0°C ~ +50°C -10°C ~ +45°C -10°C ~ +55°C -20°C ~ +60°C -30°C ~ +70°C Storage Temperature: Frequency Stability: Accuracy: Vs. Temperature: -40°C ~ +85°C ± 5 x 10-9 ± 5 x 10-7 ± 1 x 10-7 ± 5 x 10-8 ± 1 x 10-8 ± 5 x 10-9 ± 2 x 10-10 ± 1 x 10-9 ± 5 x 10-7 -A -B -C -D -E CO-B Short-Term Stability: Aging Rate: Output Waveform: Output Level: Phase Noise: - 57 - 17 - 58 - 18 - 59 per second per day per year max Clipped-Sine Wave, HCMOS 1.0 Vp-p min clipped-sine @ 1KΩ TTL, HCMOS compatible -100dBc/Hz -130sBc/Hz -140dBc/Hz -145dBc/Hz -30 dB +5.0 VDC (± 5%) +12.0 VDC (± 5%) -P All dimensions are in mm @ 10 Hz @ 100 Hz @ 1 KHz @ 10 KHz Pin 1 2 3 4 5 Configurations Vcc Vref Vc/Nc Ground Output Harmonics Distortion: Supply Voltage: Supply Current: 400mA max at warm-up 100mA max after warm-up at 25°C 4.0 Watts max ±3.0 ppm tuning via ext potentiometer Warm-up: Frequency Adjust: Note: 1. 2. Ordering Information Product name + Temperature + Stability + Frequency + Other Specification Code. i.e. CO601C18-10.0MHz or CO601D58P-10.0MHz Other frequencies, stabilities, and operating temperature ranges available. Consult VTC Support for specific requirements. Not all combinations of the above, stabilities, and temperature ranges are available. Consult VTC Support if your requirement is not standard. All specifications subject to change without notice. 3. Phone: +86 10 6301 4184 June 2001 Fax: +86 10 6301 9167 Email: sales@vanlong.com Web: http://www.vanlong.com Vanlong Technology Co., Ltd.