CO602

Clipped-Sine & HCMOS OCXO Oven Controlled Crystal Oscillator • • • • Low power consumption Excellent temperature stabilities High stability overtone crystal Fast warm-up CO602 Specifications: Frequency Range: Operating Temperature: 2.0 MHz or 150.0 MHz 0°C ~ +50°C -10°C ~ +45°C -10°C ~ +55°C -20°C ~ +60°C -30°C ~ +70°C Storage Temperature: Frequency Stability: Accuracy: Vs. Temperature: -40°C ~ +85°C ± 5 x 10-9 ± 5 x 10-7 ± 1 x 10-7 ± 5 x 10-8 ± 1 x 10-8 ± 5 x 10-9 ± 8 x 10-11 ± 1 x 10-9 ± 5 x 10-8 -A -B -C -D -E CO-C Short-Term Stability: Aging Rate: Output Waveform: Output Level: Phase Noise: - 57 - 17 - 58 - 18 - 59 per second per day per year max Clipped-Sine Wave, HCMOS 1.0 Vp-p min clipped-sine @ 1KΩ TTL, HCMOS compatible -100dBc/Hz -130sBc/Hz -140dBc/Hz -145dBc/Hz -25 dB +5.0 VDC (± 5%) +12.0 VDC (± 5%) -P All dimensions are in mm @ 10 Hz @ 100 Hz @ 1 KHz @ 10 KHz Pin 1 2 3 4 5 Configurations Vcc Vref Vc/Nc Ground Output Harmonics Distortion: Supply Voltage: Supply Current: 300mA max at warm-up 100mA max after warm-up at 25°C ±3.0 ppm tuning via ext potentiometer Frequency Adjust: Note: 1. 2. Ordering Information Product name + Temperature + Stability + Frequency + Other Specification Code. i.e. CO602C18-10.0MHz or CO602D58P-10.0MHz Other frequencies, stabilities, and operating temperature ranges available. Consult VTC Support for specific requirements. Not all combinations of the above, stabilities, and temperature ranges are available. Consult VTC Support if your requirement is not standard. All specifications subject to change without notice. 3. Phone: +86 10 6301 4184 June 2001 Fax: +86 10 6301 9167 Email: sales@vanlong.com Web: http://www.vanlong.com Vanlong Technology Co., Ltd.