SF5401

315.00 MHz SAW Filter • • • • • Designed to Provide Front-end Selectivity in 315.00 MHz Low-Loss, Coupled-Resonator Quartz Design Simple External Impedance Matching Ultra Miniature Ceramic QCC8C SMD Package Complies with Directive 2002/95/EC (RoHS Compliant) SF5401 Absolute Maximum Rating (Ta=25°C) Parameter Input Power Level DC Voltage VDC Between Any Two Pins Operating Temperature Range Storage Temperature Range Pin VDC Rating 10 12 -10 ~ +60 -40 ~ +85 Unit dBm V °C °C TA Tstg Electronic Characteristics Parameter Nominal Frequency (at 25°C) (Center frequency between 3dB point) Insertion Loss Attenuation 3dB Passband Passband Ripple At fC - 21.4 MHz (Image) Rejection At fC - 10.7 MHz (LO) Ultimate Operating Temperature Range Temperature Stability Turnover Temperature Turnover Frequency Frequency Temperature Coefficient Frequency Aging Absolute Value during the First Year Sym fC Minimum NS 30 24 -10 25 1.0 Typical 315.00 3.0 600 38 32 60 fC 0.032 Maximum NS 5.0 1.0 +60 55 10 Unit MHz dB KHz dB dB dB dB °C °C MHz ppm/C 2 IL BW3 TC TO fO FTC | fA | - ppm/yr MΩ DC Insulation Resistance Between any Two Pins NS = Not Specified Notes: 1. The frequency fC is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50Ω test system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. Frequency aging is the change in fC with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures above +65°C. Typically, aging is greatest the first year after manufacture, decreasing in subsequent years. 5. Turnover temperature, T0, is the temperature of maximum (or turnover) frequency, f0. The nominal frequency at any case temperature, TC, may be calculated from: f = f0 [1 - FTC (T0 - TC)2]. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. For questions on technology, prices and delivery please contact our sales offices or e-mail sales@vanlong.com. 2. 6. 7. 3. 8. 4. 9. Phone: +86 (10) 5820-3910 © 2007 by Vanlong Technology Co., Ltd. Fax: +86 (10) 5820-3915 Email: sales@vanlong.com Web: http://www.vanlong.com SF5401 315.00 MHz SAW Filter Package Dimensions (QCC8C) Electrical Connections Terminals 1 2 5 6 3,7 4,8 Connection Input Input Ground Output Output Groud To be Grounded Case Ground Package Dimensions Dimensions A B C D Nom (mm) 2.08 0.60 1.27 2.54 Dimensions E F G H Nom (mm) 1.20 1.35 5.00 5.00 Marking Test Circuit 1. F5401 - Part Code F 5401 315.0 YWW 2. Frequency (MHz) in 5 digits 3. Date Code: Y : Last digit of year WW : Week No. C = 13 pF Ls1 = Ls2 = 80 nH Typical Frequency Response Phone: +86 (10) 5820-3910 © 2007 by Vanlong Technology Co., Ltd. Fax: +86 (10) 5820-3915 Email: sales@vanlong.com Web: http://www.vanlong.com SF5401