SF5505

433.92 MHz SAW Filter • • • • • Ideal Front-End Filter for 433.92 MHz Receivers Low-Loss, Coupled-Resonator Quartz Design Simple External Impedance Matching Ultra Miniature Ceramic SMD Package Complies with Directive 2002/95/EC (RoHS Compliant) SF5505 Absolute Maximum Rating (TA=25°C) Parameter Input Power Level DC Voltage VDC Between Any Two Pins Operating Temperature Range Storage Temperature Range Pin VDC Rating 10 0 -10 ~ +60 -40 ~ +85 Unit dBm V °C °C TA Tstg Electronic Characteristics (TA=25°C) Parameter Frequency (25°C) (Center frequency between 3dB points) Minimum Insertion Loss 3dB Passband Passband (relative to IL) 433.76 … 434.08 MHz 433.74 … 434.10 MHz 433.68 … 434.16 MHz Relative Attenuation 10.00 … 414.00 MHz 414.00 … 428.00 MHz 428.00 … 432.84 MHz 434.92 … 442.00 MHz 442.00 … 550.00 MHz 550.00 … 1000.0 MHz Frequency Aging Absolute Value during the First Year | fA | 433.80 … 434.12 MHz Sym fC Minimum NS 670 Typical 433.92 2.0 730 1.0 1.0 1.5 50 40 20 15 40 50 Maximum NS 4.0 790 2.0 3.0 6.0 10 Unit MHz dB KHz dB dB dB dB dB dB dB dB dB ppm/yr MΩ IL BW3 α 45 35 αrel 15 10 35 45 1.0 DC Insulation Resistance Between any Two Pins NS = Not Specified Notes: 1. The frequency fC is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50Ω test system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. 4. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. For questions on technology, prices and delivery please contact our sales offices or e-mail to sales@vanlong.com. 2. 5. 6. 3. 7. Phone: +86 (10) 5820 3910 © 2007 by Vanlong Technology Co., Ltd. Fax: +86 (10) 5820 3915 Email: sales@vanlong.com Web: http://www.vanlong.com SF5505 433.92 MHz SAW Filter Package Dimensions (QCC8C) Electrical Connections Terminals 1 2 5 6 3,7 4,8 Connection Input Ground Input Output Output Ground To be Grounded Case Ground Package Dimensions Dimensions A B C D Nom (mm) 2.08 0.60 1.27 2.54 Dimensions E F G H Nom (mm) 1.20 1.35 5.00 5.00 Marking Test Circuit 1. F5505 - Part Code Frequency (MHz) in 6 digits Date Code: Y : Last digit of year WW : Week No. C = 5.6 pF * Ls1 = Ls2 = 33nH * *Note: Component values may change depending on Board layout. F 5505 433.92 2. 3. Y WW Typical Frequency Response Phone: +86 (10) 5820 3910 © 2007 by Vanlong Technology Co., Ltd. Fax: +86 (10) 5820 3915 Email: sales@vanlong.com Web: http://www.vanlong.com SF5505