MDLS-40263-C-HT-HV-FSTN-LED3G

DOCUMENT NUMBER AND REVISION VL-FS-MDLS40263-01 REV.C (MDLS40263-HT-HV-F-LED03-YG-12-CON) DOCUMENT TITLE: SPECIFICATION OF LCD MODULE TYPE ITEM NO.: MDLS40263-01 PREPARED BY CHECKED BY FRANK WANG APPROVED BY DERRICK TAM d VL-FS-MDLS40263-01 REV.C (MDLS40263-HT-HV-F-LED03-YG-12-CON) JUN/2006 PAGE 2 OF 25 DOCUMENT REVISION HISTORY DOCUMENT REVISION FROM TO 0 A DATE 0.0 2000.09.22 A 2002.03.01 B 2004.02.04 DESCRIPTION CHANGED BY First Release CHECKED BY PHILIP CHENG Items 1 to 4 were updated: PHILIP (Based on the test specification VL-TS-MDLS40263-01 CHENG REV. A 2001.07.24). 1.)(Whole document) Number and format of pages were updated. 2.)(Page 1, Page 4) “Preliminary specification” was changed to “Specification”. 3.)(Page 8, point 4.2, table 5) Supply voltage (LCD), supply current (Logic & LCD) & supply current (LCD) were updated. 4.)(Page 12) Point 4.5 was added. K.P.HO Items 1 to 2 were updated: HELEN HE (Based on a.) Test specification VL-TS-MDLS40263-XX, REV. B, 2004.01.12). b.) VL-QUA-012B-S, REV. U, JUN/2003 (English version), YU HAO TOM LEE According to VL-QUA-012B, LCD size is small because Unit Per Laminate=27 which is more than 6pcs/Laminate.) 1.)(Page 8, point 4.2, table 5) Supply current (Logic & LCD) & supply current (LCD) were updated. 2.) (Page 13, Point 5) LCD Cosmetic acceptance criteria was added. B C 2006.06.16 Items 1 to 7 were updated. Based on a.) Test Specification: VL-TS-MDLS40263-XX REV.F 2006.04.05 b.) VL-QUA-012B REV.W 2004.03.20. 1.) (Cover page and header) Module’s description was updated. 2.) (Page 4, Point 1) “RoHS” compliance was added. 3.) (Page 4, Table 1) Weight & outline dimension were added. 4.) (Page 5, Figure1) Module specification was updated. 5. (Page 8, Table 5) Wavelength & Luminance of yellow-green LED03 backlight were added. 6.) (Page 13, Point 5) Remark was added. 7.) (Page 14, Point 6) LCD cosmetic conditions was updated. LINDA ZHU FRANK WANG VL-FS-MDLS40263-01 REV.C (MDLS40263-HT-HV-F-LED03-YG-12-CON) JUN/2006 PAGE 3 OF 25 CONTENTS Page No. 1. GENERAL DESCRIPTION 4 2. MECHANICAL SPECIFICATIONS 4 3. 3.1 3.2 ABSOLUTE MAXIMUM RATINGS ELECTRICAL MAXIMUM RATINGS-FOR IC ONLY ENVIRONMENTAL CONDITION 6 6 6 4. 4.1 4.2 4.3 4.4 4.5 ELECTRICAL SPECIFICATIONS INTERFACE SIGNALS TYPICAL ELECTRICAL CHARACTERISTICS TIMING SPECIFICATIONS TIMING DIAGRAM OF VDD AGAINST V0 CORRESPONDENCE BETWEEN CHARACTER CODES AND CHARACTER PATTERNS (NOVATEK STANDARD NT3881D-01) 7 7 8 9 11 12 5. REMARK 13 6. LCD COSMETIC CONDITIONS 14 VL-FS-MDLS40263-01 REV.C (MDLS40263-HT-HV-F-LED03-YG-12-CON) JUN/2006 PAGE 4 OF 25 VARITRONIX LIMITED Specification of LCD Module Type Item No.: MDLS40263-01 1. General Description • 40 characters (5x8 dots) x 2 lines FSTN HT2 Positive Black & White Transflective LCD Character Module. • • • • • • • Viewing angle: 12 O’clock. Driving duty: 1/16 Duty, 1/4 bias. ‘NOVATEK’ NT3881DH-01/AI (die form) LCD Controller and Driver or equivalent. ’SAMSUNG’ KS0065B-PCC (die form) LCD Segment/Common Driver or equivalent. Yellow-green LED03 backlight. Connector. “RoHS” compliant. 2. Mechanical Specifications The mechanical detail is shown in Fig. 1 and summarized in Table 1 below. Table 1 Parameter Specifications Outline dimensions 108.0(W) x 20.0(H) x 13.0 MAX.(D) (Exclude connector) Effective viewing area 89.0(W) x 10.0(H) Display format 40 characters x 2 lines Character size 1.85(W) x 3.15(H) (5 x 8 dots) Character spacing 0.30(W) x 1.10(H) Character pitch 2.15(W) x 4.25(H) Dot size 0.33(W) x 0.35(H) Dot spacing 0.05(W) x 0.05(H) Dot pitch 0.38(W) x 0.38(H) Weight Approx: 30 Unit mm mm mm mm mm mm mm mm gram VL-FS-MDLS40263-01 REV.C (MDLS40263-HT-HV-F-LED03-YG-12-CON) JUN/2006 PAGE 5 OF 25 Figure 1: Module specification VL-FS-MDLS40263-01 REV.C (MDLS40263-HT-HV-F-LED03-YG-12-CON) JUN/2006 PAGE 6 OF 25 3. Absolute Maximum Ratings 3.1 Electrical Maximum Ratings-for IC Only Table 2 Parameter Symbol Min. Max. Unit Power Supply voltage (Logic) VDD - VSS -0.3 +7.0 V Power Supply voltage (LCD drive) VLCD=VDD – V0 -0.3 +13.5 V Input voltage Vin -0.3 VDD +0.3 V Note: The modules may be destroyed if they are used beyond the absolute maximum ratings. All voltage values are referenced to VSS = 0V. 3.2 Environmental Condition Table 3 Operating Temperature (Topr) Storage Item Temperature Remark (Tstg) (Note1) Min. Max. Min. Max. Ambient Temperature -20°C +70°C -30°C +80°C Dry Humidity (Note1) No condensation 90% max. RH for Ta ≤ 40°C