OLM-O095CNC

VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 2 OF 25 REV.A DOCUMENT REVISION HISTORY 1: DOCUMENT REVISION FROM TO A DATE DESCRIPTION CHANGED BY PHILIP CHENG CHECKED BY KENNY KOWK 2006.03.27 First Release. VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 3 OF 25 REV.A CONTENTS 1. 2. 3. GENERAL DESCRIPTION MECHANICAL SPECIFICATIONS INTERFACE SIGNALS Page No. 4 4 8 9 9 9 4. ABSOLUTE MAXIMUM RATINGS 4.1 ELECTRICAL MAXIMUM RATINGS – FOR IC ONLY 4.2 ENVIRONMENTAL CONDITION 5. ELECTRICAL SPECIFICATIONS 5.1 DC CHARACTERISTICS 5.2 AC CHARACTERISTICS 6. 7. 8. 9. OLED DRIVING WAVEFORM POWER UP / DOWN SEQUENCE DRIVER IC COMMAND TABLE ELECTRO-OPTICAL CHARACTERISTICS 10 10 10 14 15 16 17 18 24 10. INSPECTION STANDARDS 11. GENERAL PRECAUTIONS VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 4 OF 25 REV.A VARITRONIX LIMITED Preliminary Specification of OLED Module Type Module No.: OLM-O095CNC-02 1. General Description • • • • • 96 x RGB x 64 dots, 0.95”(diagonal), 65K color OLED panel, passive, graphic module. Driving scheme: 1/64 duty. Driving IC: SSD1332 (TCP). Logic voltage: 3.0V. 8-bit 6800-series parallel interface, 8-bit 8080-series parallel interface or serial peripheral interface. 2. Mechanical Specifications The mechanical detail is shown in Fig. 1 and summarized in Table 1 below. Table 1 Parameter Outline dimensions Polarizer size Active area Display format Dot size Dot spacing Dot pitch Weight Specifications 26.66(W) x 20.38(H) x 1.70 MAX.(D) (Excluded IC & TCP) 24.66(W) x 16.38(H) 20.13(W) x 13.42(H) 96 x RGB x 64 0.18(RGB)(W) x 0.19(H) 0.03(W) x 0.02(H) 0.21(RGB)(W) x 0.21(H) Approx < 3 Unit mm mm mm dots mm mm mm grams VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 5 OF 25 REV.A Figure 1: Outline Drawing VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 6 OF 25 REV.A DISPLAY PANEL SIZE 96 x RGB x 64 Figure 2: Block Diagram VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 7 OF 25 REV.A Figure 4: Example Schematic for DC-DC circuit Figure 3: Schemetic Table 2: Part List VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 8 OF 25 REV.A 3. Interface signals Table 3 No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Symbol NC VSS GDR VDDB FB RESE VBREF VP_A VP_B VP_C VDD BS1 BS2 IREF ______ Description No connection. Analog (Driver) GND Refer to the DC-DC voltage converter section for connection detail Refer to the DC-DC voltage converter section for connection detail Refer to the DC-DC voltage converter section for connection detail Refer to the DC-DC voltage converter section for connection detail Refer to the DC-DC voltage converter section for connection detail Pre-charge voltage, Not Connected Pre-charge voltage, Not Connected Pre-charge voltage, Not Connected Power supply pin for Logic operation of the driver Configure MCU interface selection pin Configure MCU interface selection pin Segment output current reference pin ______ CS ________ CS (or CS#). Chip select Input ________ RES _____ RES (RES#). Reset signal Input _____ D/ C ______ D/ C (DC#). Data / Command control Pin ______ R/ W _______ R/ W (WR#). MCU Interface Input _______ RD D0 D1 D2 D3 D4 D5 D6 D7 NC VCOMH VCC NC RD (RD#). MCU Interface Input Data Bus Data Bus Data Bus Data Bus Data Bus Data Bus Data Bus Data Bus No connection. Voltage output high level for COM signals OLED Dot Matrix Power Supply No Connection VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 9 OF 25 REV.A 4. 4.1 Absolute Maximum Ratings Electrical Maximum Ratings – For IC Table 4 Parameter Logic Supply Voltage Driving Driving Supply voltage SEG/COM output voltage Input voltage Symbol VDD VCC VREF VCOMH VIN Min -0.3 0 0 0 0 VSS-0.3 Typ. Max 4.0 18 18 16 16 VDD+0.3 Unit V V V V V V Note 1:Ta = 25°C Unless otherwise specified, Vss = 0V. Note 2: Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the limits in the electrical characteristics tables or pin description. 4.2 Environmental Condition Table 5 Storage Temperature Item (Tstg) (Note 1) Min. Max. Min. Max. Ambient Temperature -20°C +60°C -30°C +80°C Note 1: Product cannot sustain at extreme storage conditions for long time. Operating Temperature (Topr) Remark Dry VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 10 OF 25 REV.A 5. Electrical Specifications 5.1 DC Characteristics At Ta = 25 °C, VDD = 2.4V to 3.5V, VSS = 0V. Table 6 Characteristics Symbol Min Supply Logic VDD 2.4 voltage Operating VCC 13 Input High voltage VIH 0.8xVdd voltage Low voltage VIL 0 Output High voltage VOH 0.9xVdd voltage Low voltage VOL 0 Current Logic Idd consumption Driving Icc Sleep mode current Isleep 5.2 AC Characteristics Table 7 Items Symbol Min Typ. 0.97 Fosc x 1/(D*K*64) Max Unit MHz Hz Oscillation Internal Fosc frequency oscillator Frame Internal Ffrm frequency oscillator Note: D : divide ratio (default value = 1) K : number of display clocks (default value = 136) Refer to command table for detail description Typ 3.0 14 0.15 7.3 - Max 3.5 15 Vdd 0.2xVdd Vdd 0.1xVdd 0.21 9.5 100 Unit V V V V V V mA mA µA VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 11 OF 25 REV.A 5.2.1 8080-Series MPU Parallel Interface Timing Characteristics VDD-VSS = 2.4 to 3.5V, TA = -20 to 60°C Figure 5: 8080-Series MPU Parallel Interface Timing Characteristics VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 12 OF 25 REV.A 5.2.2 6800-Series MPU Parallel Interface Timing Characteristics VDD-VSS = 2.4 to 3.5V, TA = -20 to 60°C Figure 6: 6800-Series MPU Parallel Interface Timing Characteristics VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 13 OF 25 REV.A 5.2.3 Serial Interface Timing Characteristics VDD-VSS = 2.4 to 3.5V, TA = -20 to 60°C Figure7: Serial Interface Timing Characteristics VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 14 OF 25 REV.A 6. OLED Driving Waveform Figure 8: OLED Driving Waveform (Duty Ratio = 1/64) VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 15 OF 25 REV.A 7. Power Up / Down Sequence Figure 9 VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 16 OF 25 REV.A 8. Driver IC Command Table VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 17 OF 25 REV.A 9. Electro-optical Characteristics VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 18 OF 25 REV.A 10. Inspection Standards VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 19 OF 25 REV.A 10.3 Inspection standards VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 20 OF 25 REV.A 10.3 Inspection standards (Continued) VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 21 OF 25 REV.A 10.3 Inspection standards (Continued) VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 22 OF 25 REV.A 10.3 Inspection standards (Continued) VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 23 OF 25 REV.A VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 24 OF 25 REV.A 11. General Precautions VL-PS-OLM-O095CNC-02 (OLM-O095CNC) MAR/2006 PAGE 25 OF 25 REV.A “Varitronix Limited reserves the right to change this specification.” FAX:(852) 2343-9555. URL:http://www.varitronix.com - END -