FX-104-CFC-A1E7

Product Data Sheet FX-104 Frequency Translator Features • Output frequencies up to 777.60 MHz • Jitter Generation OC-192 compliant • Jitter transfer per GR-253-CORE • Single 5 or 3.3 Vdc supply • Locked to specified Input frequency, e.g. 8 kHz • 1" x 0.8" x 0.25", Surface Mount (FR4 base) Applications • • • • SONET / SDH / ATM DWDM / FDM DSL-PON Interconnects FEC (Forward Error Correction) FX-104 Frequency Translator Description Vectron's FX-104 is a SAW based frequency translator which is used to translate any input frequency such as 8 kHz, 1.544 MHz, 2.048 MHz, 19.440 MHz etc. to any specific frequency from 170 MHz to 777.6 MHz. The input frequency does not have to be a 50/50% duty cycle and as an example can be an 8 kHz signal with a logic high "on time" of only 1us, such as a BITS clock. The FX-104 also has the ability to translate any of 1 to 4 different input frequencies to one common output frequency, such as input frequencies of 8 kHz and 1.544 MHz and 19.44 MHz and any other frequency between 333 Hz and 170 MHz translating them to any specific output frequency from 170 MHz to 777.600 MHz. The "Input Frequency tracking capability" is the total amount of input frequency deviation in which the FX104 is guaranteed to track or translate. As an example, a typical input clock would be 8 kHz ±20 ppm. The FX104 is guaranteed to track at least ±40 ppm of error over temperature/ aging/ power supply and is more than twice what most applications require. The PLL control voltage is brought out through a 470K ohm resistor. This would allow for the use of external circuitry (analog comparators or an A/D converter plus a processor) to detect when the control voltage is getting close to the limits of the pull range. Performance Characteristics Parameter Output Frequencies Supply Voltage, Supply Current Input Signal, OUTPUT, VOL C = 5 Vdc D = 3.3 Vdc A = HCMOS D = PECL F = Comp PECL Vcc Vcc Icc CLKIN CLKIN --VOL VOH tR/tF Sym Symbol Min 155.52 4.75 3.15 Typical 5.00 3.30 95 HCMOS PECL PECL Max 777.6 5.25 3.45 125 Unit MHz Vdc Vdc mA ------V V ps % ps ps dB ppm --Vcc-1.95 Vcc-0.98 45 --Vcc-1.63 Vcc-0.75 400 55 1 5 0.1 VOH Rise/Fall Time (20% to 80%) Output Symmetry Jitter Generation, rms (12 kHz to 20 MHz) Jitter Generation, rms (cycle to cycle method) Jitter Transfer, GR-253-CORE sec 5.6.2.1.2 Input Frequency Tracking Capability (Can translate a Stratum 1,2,3,3E,4 or SONET Min source) Operating Temperature Size 250 49/51 0.23 3 APR ±40 Temp Range C = 0°C to +70°C Temp Range F = -40°C to +85°C 25.4 x 20.32 x 6.35 mm (1.0” x 0.8” x 0.25”) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com FX-104 Frequency Translator Outline Drawing Pin Out Pin 1 Symbol CLKIN Function Input Frequency - The FX-104 series AC couples the input, this means the unit is capable of handling HCMOS, LvHCMOS, PECL and LvPECL input signals. (For Input Frequencies below 1 MHz only HCMOS and LvHCMOS are supported) Ground Lock Detect Logic “1” indicates a locked condition Logic “0” indicates that no input signal is present or the input signal has moved out of the lock range. PLL/ VCXO control voltage Under locked conditions, should be >0.3V and 0.5V and