FX-401

Frequency Controlled Crystal Oscillator FX-401 Features Reflow Process Compatible Surface Mount Package Low Phase Noise Build in PLL-Circuit Typical Applications Base Stations Previous Vectron Model Number Output Frequency Range Standard Frequencies C3430 10 MHz – 700 MHz 10; 25; 26; 39.3216; 52; 56; 61.44;77.76; 104; 122.88 MHz 153.6; 155.52; 160; 184.32; 311.04; 491.52; 622.08 MHz Reference Frequency Parameter Input frequency Standard input frequencies Min 1 Typ 10 13 26 32,768 Max 300 Units MHz MHz MHz MHz MHz Condition ± 2 ppm Options5 HCMOS / similar sinewave Signal Reference Level Reference Input Impedance 0.5 2 HCMOS 4 Vpp kΩ htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 1/8 Reference Frequency Parameter Signal Reference Level Min Reference Level Max Reference Input Impedance Signal Reference Level Min Reference Level Max Reference Input Impedance -0.45 0.25 100 1.355 2.155 50 LVDS -0.25 0.45 V V Ω LVDS Min Typ PECL Max 1.68 2.42 Units V V Ω Condition LVPECL Output Frequency Parameter Output frequency Signal Load Rise and Fall time Duty cycle Signal Load Rise and Fall time Duty cycle Signal Load Rise and Fall time Duty cycle 40 100 1 60 45 LVDS Ω ns % 10 to 90 % 50 1 55 40 PECL Ω ns % Vs - 2V 20 to 80 % 15.0 5 60 Min 10 Typ HCMOS Max 700 Units MHz Condition pF ns % @ 15 pF 10 to 90 % @ Vs/2 Supply Voltage (Vs) Parameter Supply voltage [Standard] Current consumption Min 3.135 Typ 3.3 Max 3.465 50 Units VDC mA Condition steady state @ +25°C & 3.3VDC Additional Parameters Parameter Phase Noise 3 Min Typ -95 -125 -142 -155 -160 Max Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Ps RMS 10 100 1 10 100 Condition Hz Hz kHz kHz kHz @ 10Hz .. 100kHz @ 10 MHz HCMOS Jitter 0.7 htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 2/8 Additional Parameters Parameter Phase Noise3 Min Typ -75 -105 -130 -140 -142 Max Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Ps RMS 10 100 1 10 100 Conditions Hz Hz kHz kHz kHz @ 12kHz .. 20MHz @ 311.04 MHz PECL Jitter VCXO Control PIN 7 Weight Processing & Packing Operating temperature range Operating temperature range Storage temperature range -20 -30 -55 0,5 0.2 2,5 9 Handling & processing note +70 +85 +125 V g °C °C °C Absolute Maximum Ratings Parameter Supply voltage (Vs) Maximum output load @ CMOS Min Typ Max 6.0 40 Units V pF Condition htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 3/8 Enclosure Type G233 “A” Input : Single ended (HCMOS or Sinewave) Output : 1x HCMOS or PECL or LVDS Package Codes : Options5 Height “H” 5.9 Pin Length “L” NA Height “H” 5.9 Pin Length “L” NA Options5 Type G273 “B” Input : Complementary (PECL or LVDS) Output : 1x PECL or LVDS Dimensions : mm Dimensions : mm Pin Connections 1 VCXO Control Description Test output of the control voltage for the VCXO Only for modul test or observance Test output signal for PLL lock detected. High signal  PLL in lock Low signal  PLL out of lock Only for modul test or observance 1 Pin Connections VCXO Control Description Test output of the control voltage for the VCXO Only for modul test or observance Test output signal for PLL lock detected. High signal  PLL in lock Low signal  PLL out of lock Only for modul test or observance 2 Lock Detector Output 2 Lock Detector Output 3 5 6;7 8 GND RF-OUT RF-Out complementary / (GND: Single ended input only) Ground connection. Keep traces physically short and connect immediately to ground plane for best performance RF syncronised output. RF syncronised output. Ground connection: Single Ended Input only 6;7 8 N.C. GND GND RF-OUT RF-Out complementary GND Ref. Frequency Complementary in Ref. Frequency in Vs High stable complementary input frequency for syncronisation High stable input frequency for syncronisation Power supply pin Ground connection. Keep traces physically short and connect immediately to ground plane for best performance RF syncronised output. 9 9 RF syncronised output. 10 12 13 14 Ref. Frequency in Vs High stable input frequency for syncronisation Power supply pin 13 14 htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 4/8 Enclosure Type G273 “C” Input : Single ended (HCMOS or Sinewave) Output : 2x PECL or LVDS Package Codes : Options5 Height “H” 5.9 Pin Length “L” NA Height “H” 5.9 Pin Length “L” NA Options5 Type G267 “D” Input : Single ended (HCMOS or Sinewave) Output : 4x HCMOS (same frequency) Dimensions : mm Dimensions : mm Pin Connections 1 VCXO Control Description Test output of the control voltage for the VCXO Only for modul test or observance Test output signal for PLL lock detected. High signal  PLL in lock Low signal  PLL out of lock Only for modul test or observance 1 Pin Connections VCXO Control Description Test output of the control voltage for the VCXO Only for modul test or observance Test output signal for PLL lock detected. High signal  PLL in lock Low signal  PLL out of lock Only for modul test or observance 2 Lock Detector Output N.C. GND RF-OUT 1 Compl. RF-OUT 1 RF-OUT 2 Compl. RF-OUT 2 GND N.C. Ref. Frequency in Vs 2 Lock Detector Output 3 5 6 7 8 9 10 12 13 14 5 RF output frequency 1 Complimentary RF output frequency 1 RF output frequency 2 Complimentary RF output frequency 2 6 7 8 9 10 High stable input frequency for syncronisation Power supply pin RF-OUT 1 GND RF-OUT 2 RF-OUT 3 GND RF-OUT 4 4 independent RF syncronised outputs Ground connection. Keep traces physically short and connect immediately to ground plane for best performance 4 independent RF syncronised outputs 4 independent RF syncronised outputs 4 independent RF syncronised outputs High stable input frequency for syncronisation Power supply pin 13 14 Ref. Frequency in Vs htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 5/8 Enclosure Marking FX-401 Frequency ● AYYWW Typical Phase Noise and Jitter (10 MHz; HCMOS output) (311,04 MHz; PECL output) Frequency range [Hz] 10Hz to 100kHz Jitter [ps rms] 0.708ps Frequency range [Hz] 12kHz to 20MHz Jitter [ps rms] 0.168ps Block Diagramm VS VS Reference Frequency PLL Circuit 1 4 VCXO Control VS 8 VCXO 5 Loop Filter VCXO 0 VS 8 VCXO 4 5 0 1 0 Lock Detector htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 6/8 Standard Shipping Methode (For B-Type Enclosure) A X B P Enclosure Type G194B *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Lage im Gurt Position in tape Pin 1 Abwickelrichtung Unwinding direction K Gurtunterseite Tape buttom side Gurtoberseite Tape upper side Production tolerance complying DIN IEC 286-3 Tape width W [mm] tbd Quantity per meter tbd Quantity per reel tbd Dimension P tbd Recommanded Reflow Profile Profile Feature Average ramp-up rate (TL to Tp) Preheat -Temperature Min Tsmin -Temperature Min Tsmax -Time (min to max)(ts) Pb-Free Assembly/ Sn-Pb Assembly 3°C/second max. 150°C 200°C 60-180 seconds 3°C/second max 217°C 60-150 seconds max 260°C Profile Feature Time 25°C to Peak Temperature Time maintainted above -Temperature (TL) -Time (tL) Pb-Free Assembly/ Sn-Pb Assembly 8 minutes max. 217°C 60-150 seconds Tsmax to TL-Ramp-up Rate Time maintainted above -Temperature (TL) -Time (tL) Peak Temperature (TP) Time within 5°C of actual Peak Temperature (tP) Ramp-down Rate 20-40 seconds 6°C/ second max Note: All temperatures refer to topside of the package, measured on the package body surface. SMD oscillators must be on the top side of the PCB during the reflow process. htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 7/8 How to order this product: Use this worksheet to forward the following information to your factory representative: Model FX-401 Height 1 Supply Voltage Code E RF Output Code A Temperature Range J Reference Frequency Output Frequency Height: 1: A 5,9 mm 2: B 5,9 mm 3: C 5,9 mm 4: D 5,9 mm Supply Voltage Code: E: 3,3 V RF Output Code: A: HCMOS C: PECL D: LVDS Temperature Range: H: -30...+85°C J: -20...+70°C htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 8/8