FX-428-DPC-C4P8B

FX-427 Low Jitter Frequency Translator Features • Quartz-based PLL for Ultra-Low Jitter • Frequency Translation up to 850 MHz • Accepts 4 externally-muxed clock inputs • LVCMOS/LVDS/LVPECL Inputs Compatible • Differential LVPECL Outputs • Lock Detect • Output Disable • 20.3 x 13.7 x 5.1 mm surface mount package • Compliant to EC RoHS Directive Description The FX-427 is a precision quartz-based frequency translator used to translate 1 to 4 selected input clocks as low as 8 kHz to an integer multiple as high as 850 MHz. The FX-427’s superior jitter performance is achieved through the filtering action of the on-board voltage-controlled SAW oscillator (VCSO) and integrated loop filter. Two low-jitter outputs are provided. Monitoring and control functionality are also standard features. Applications • Wireless Infrastructure • 802.16 BTS • 10 Gigabit FC • 10GbE LAN / WAN • OADM and IP Routers • Test Equipment Figure 1. Functional Block Diagram Vectron International, 267 Lowell Road, Hudson, NH 03051 Page 1 of 8 Tel: 1-88-VECTRON-1 • Web: www.vectron.com Rev: 8Nov06 FX-427 Low Jitter Frequency Translator Table 1. Electrical Performance Parameter Frequency Input Frequency Capture Range Output Frequency - Primary Output Frequency - Secondary FIN APR FOUT1 FOUT2 VCC ICC FIN FIN FIN VOCM VOH VOL VP-P tR tF SYM Φn Φn Φn Φn Φn Φn Φn ΦJ ΦJ TOP VCC-1.5 VCC-1.085 VCC-1.830 0.008 ±40 500 125 3.13 3.3 140 CMOS LVDS LVPECL VCC-1.3 VCC-0.950 VCC-1.700 700 0.5 0.5 50 -64/-27 -95/-55 -123/-85 -143/-110 -146/-130 -146/-146 -146/-146 0.30 0.12 0° to 70° or -40 to +85° VCC-1.1 VCC-0.880 VCC-1.620 V V V mV-pp ns ns % dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS ps RMS °C 200 850 850 3.46 180 MHz ppm MHz MHz V mA 1,2,3 1,2,3 1,2,3 1,2,3 2,3 3 Symbol Minimum Typical Maximum Units Notes Supply Voltage Current (No Load) Input Signal CMOS LVDS LVPECL 2,3 Differential Output (Options F and P) Common Mode Output Voltage DC Output High Voltage DC Output Low Voltage Peak-to-Peak Output Voltage Rise Time Fall Time Symmetry SSB Phase Noise, FOUT = 155.52/622.08 @ 10 Hz Offset @ 100 Hz Offset @ 1 kHz Offset @ 10 kHz Offset @ 100 kHz Offset @ 1 MHz Offset @ 10 MHz Offset Jitter Generation 155.52 MHz (12 kHz – 20 MHz BW) 622.08 MHz (12 kHz – 20 MHz BW) 45 55 3,5 3,5 3,5 3,5 4,5 4,5 2,3 5,6 5, 6 1,3 Operating Temperature (Options C or F) 1. 2. 3. 4. 5. 6. See Standard Frequencies and Ordering Information. Parameters are tested with production test circuit below (Fig 2). Parameters are tested at ambient temperature with test limits guard banded for specified operating temperature. Measured from 20% to 80% of a full output swing (Fig 3). Not tested in production, guaranteed by design, verified at qualification. The FX-427 phase noise and jitter performance can be optimized for specific applications. Please consult with Vectron’s Application Engineers for more information. Figure 2. Test Circuit Figure 3. LVPECL Waveform Vectron International, 267 Lowell Road, Hudson, NH 03051 Page 2 of 8 Tel: 1-88-VECTRON-1 • Web: www.vectron.com Rev: 8Nov06 FX-427 Low Jitter Frequency Translator Figure 4. Pin Configuration Table 2. Pin Out Pin # 1 2 3 4 5 Symbol SEL0 SEL1 GND I/O I I GND Level LVCMOS LVCOMS Supply Function Frequency Select - see table 3 Frequency Select – see table 3 Case and Electrical Ground Not present VCXO Control Voltage Monitor Under locked conditions VMON should be > 0.3V and