FX-500

Product Data Sheet FX-500 Low Jitter Frequency Translator Features • Complete Frequency Translator to 77.760 MHz • 3.3 Volt or 5.0 Volt Supply • Capable of locking to an 8 kHz pulse/BITS clock • Tri-State Output allows board test • J-lead Ceramic Package • Advanced Customer ASIC Technology • Absolute Pull Range Performance to ±100 ppm • CMOS Output • Commercial or Industrial Temperature Range • EIA Compatible Tape and Reel Packaging • RoHS/Lead Free Compliant Description The FX-500 is a complete crystal-based frequency translator used in communications applications where low jitter is paramount. Performance advantages include superior jitter performance, high output frequencies and small package size. Advanced custom ASIC technology results in a highly robust, reliable and predictable device. The device is packaged in a 6 pin J-Lead ceramic package with a hermetic seam welded lid. Applications • Frequency Translation, Clock Smoothing • Telecom – SONET/SDH/ATM • Datacom – DSLAM, DSLAR, Access Nodes • Cable Modem Head End • Base Station – GSM, CDMA • Military Communications Figure 1. Functional Block Diagram Tel: 1-88-VECTRON-1 • Web: www.vectron.com Page 1 of 6 Rev: 20Jun06 Vectron International, 267 Lowell Road, Hudson, NH 03051 FX-500 Low Jitter Frequency Translator Electrical Performance Parameter Supply Voltage Supply Current @ 19.44 MHz 48.408 MHz 77.760 MHz Input Input Low Level Voltage Input High Level Voltage Frequency Pulse Width Output Output High Level Voltage Output Low Level Voltage Transition Times Rise Time Fall Time Duty Cycle < 60 MHz > 60 MHz Nominal Output Frequency Absolute Pull Range Leakage Current of Input Loop Bandwidth (-3 dB), 8 kHz Input Jitter (Application: 8 kHz to 77.76 MHz) rms peak/peak peak/peak Operating Temperature Package Size Symbol VDD VDD IDD IDD IDD VIL VIH fIN Minimum 3.0 4.5 Typical 3.3 5.0 15 25 35 Maximum 3.6 5.5 20 30 40 0.3* VDD Units V V mA mA mA V V Hz Ns V V ns ns % Notes 1,5 0.7* VDD 1k 6 0.9*VDD 77.76 M VOH VOL tR tF D 0.1*VDD 1.8 1.8 45 40 0.100 See Part Numbering -1 10 4.7 44 0.003 1 3.0 3.0 55 60 77.76 2 3,5 MHz ppm µA Hz ps ps UI °C Mm 4 fO APR IC BW ΦJ TOP -40 +85 5 9.0 x 14.0 x 4.5 1. A 0.1 µF low frequency tantalum bypass capacitor in parallel with a 0.01 µF high frequency ceramic capacitor is recommended. 2. Figure 3 defines the waveform parameters. Figure 2 illustrates the standard test conditions under which these parameters are specified and tested. 3. Duty cycle is defined as (on time÷period), with VS = VDD/2, per figure 3. Duty cycle is measured with a 15pf load per figure 2. 4. Other frequencies may be available, please contact factory. 5. See Standard Frequencies and Ordering Information (Pg 6). IDD 30k 2k V DD + - .1uF .01uF 6 1 fIN 5 2 4 3 15pF Figure 2. Test Circuit Figure 3. Output Waveform Vectron International, 267 Lowell Road, Hudson, NH 03051 Page 2 of 6 Tel: 1-88-VECTRON-1 • Web: www.vectron.com Rev: 20Jun06 FX-500 Low Jitter Frequency Translator Outline Diagram 6 5 4 . 026 [0.66] Suggested Pad Layout FX-500-LAC-GNK 8K000/77M760 VI 142 1 2 3 Figu Figu . 300 [7.62] . 087 [2.21] . 100 [2.54] . 200 [5.08] i nch [m m ] Figure 4. Figure 5. Pin Out Pin # 1 2 3 4 5 6 1. 2. Symbol fIN Tri-state GND fO 2 LD VDD 1 Function Input Frequency Logic Low = Output Disable Logic High = Output Enabled Case and Electrical Ground Output Frequency Lock Detect Power Supply Voltage (3.3 V ± 0.3 or 5.0 V ± 0.5) Tristate is driven to logic high or logic low; there is no internal pull up or pull down resistor. LD is an open collector output requiring a 30k ohm pullup resistor to VDD. LD output is logic high under locked condition, logic low for no input at fIN, and for “out-of-lock” condition LD transitions between logic low and logic high at the phase detector frequency. Tape and Reel (EIA-481-2-A) Po ØDo W2 F W D C N A P1 W1 B Tape Dimensions (mm) Dimension Tolerance FX-500 Reel Dimensions (mm) Do Typ 1.5 W Typ 24 F Typ 11.5 Po Typ 4 P1 Typ 12 A Typ 330 B Min 1.78 C Typ 13 D Min 20.2 N Min 100 W1 Typ 24.4 W2 Max 30.4 # Per Reel 200 Vectron International, 267 Lowell Road, Hudson, NH 03051 Page 3 of 6 Tel: 1-88-VECTRON-1 • Web: www.vectron.com Rev: 20Jun06 FX-500 Low Jitter Frequency Translator Absolute Maximum Ratings Parameter Power Supply Storage Temperature Soldering Temp/Time Symbol VCC TS TLS Ratings 0 to 7 -55 to 125 260/40 Unit Vdc °C °C/sec Stresses in excess of the absolute maximum ratings can permanently damage the device. Functional operation is not implied at these or any other conditions in excess of conditions represented in the operational sections of this data sheet. Exposure to absolute maximum ratings for extended periods may adversely affect device reliability. Reliability The FX-500 family is capable of meeting the following qualification tests: Environmental Compliance Parameter Mechanical Shock Mechanical Vibration Solderability Gross and Fine Leak Resistance to Solvents Conditions MIL-STD-883, Method 2002 MIL-STD-883, Method 2007 MIL-STD-883, Method 2003 MIL-STD-883, Method 1014 MIL-STD-883, Method 2016 Handling Precautions Although ESD protection circuitry has been designed into the FX-500 proper precautions should be taken when handling and mounting. VI employs a human body model and a charged-device model (CDM) for ESD susceptibility testing and design protection evaluation. ESD Ratings Model Human Body Model Charged Device Model Minimum 1000 V 1000 V Conditions MIL-STD 883, Method 3015 JEDEC, JESD22-C101 Vectron International, 267 Lowell Road, Hudson, NH 03051 Page 4 of 6 Tel: 1-88-VECTRON-1 • Web: www.vectron.com Rev: 20Jun06 FX-500 Low Jitter Frequency Translator Reflow Profile (IPC/JEDEC J-STD-020C) Parameter Symbol PreHeat Time Ramp Up Time Above 217 oC Time To Peak Temperature Time At 260 oC Ramp Down tS R UP tL t AMB-P tP R DN 260 Value 60 sec Min, 180 sec Max 3 oC/sec Max 60 sec Min, 150 sec Max 480 sec Max 20 sec Min, 40 sec Max 6 oC/sec Max Temperature (DegC) The FX-500 has been qualified to meet the JEDEC standard for Pb-Free assembly. The temperatures and time intervals listed are based on the Pb-Free small body requirements. The temperatures refer to the topside of the package, measured on the package body surface. The FX-500 device is hermetically sealed so an aqueous wash is not an issue. . tL R UP tP R DN 217 200 150 tS t AMB-P 25 Time (sec) Vectron International, 267 Lowell Road, Hudson, NH 03051 Page 5 of 6 Tel: 1-88-VECTRON-1 • Web: www.vectron.com Rev: 20Jun06 FX-500 Low Jitter Frequency Translator Standard Frequencies (MHz)* 0.00100 0.00400 0.00800 0.01000 0.01573 0.01575 0.04800 0.06400 0.10000 0.25600 A1 A2 A3 A6 AD AC AB A5 AH AM 0.40000 0.48000 0.51200 0.65545 1.02400 1.22880 1.54400 2.04800 6.31200 7.68000 AF AK AJ AE B2 BK B3 B4 C7 C9 10.00000 10.48720 12.28800 12.35200 16.00000 16.38400 19.44000 19.69897 19.71900 20.00000 C4 DN D8 D1 D9 D5 D6 DK DH E2 20.48000 24.57600 24.70400 25.00000 25.60000 27.00000 32.00000 32.76800 34.36800 37.05600 E4 E6 E7 F7 F6 F4 H2 H3 H6 H4 38.88000 40.00000 44.73600 44.92800 49.15200 49.40800 50.00000 51.84000 60.00000 61.44000 H5 JF J3 JE J7 J2 JD J4 JR J5 62.20800 65.53600 73.72800 77.76000 J8 J6 K8 K2 Note 1: Other frequencies are available upon request, please contact VI for details. SS is code for non-standard frequencies, list the frequency after the part number. Note 2: Not all combinations are possible. Note 3: Output frequency must be equal to or greater than the input frequency. The ratio of fO/fIN must be an integer. Also, the output frequency must be equal to greater than 100 kHz. Ordering Information EXAMPLE: FX-500-LAC-GNK-A3-K2 FX-500, 3.3V, CMOS output, 0 to 70°C operating temperature, ±50 ppm APR, 40/60% duty cycle with an 8 kHz input and 77.760 MHz output. For Additional Information, Please Contact: USA: Vectron International • 267 Lowell Rd. Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • F ax: 1-888-FAX-VECTRON EUROPE: Landstrasse, D-74924, Neckarbischofsheim, Germany • Tel: 49 (0) 7268 8010 • Fax: 49 (0) 7268 801281 ASIA: 1 F-2F, No 8 Workshop, No. 3 08 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, China 200131 Tel: 86 21 5048 0777 • Fax: 86 21 5048 1881 Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Vectron International, 267 Lowell Road, Hudson, NH 03051 Page 6 of 6 Tel: 1-88-VECTRON-1 • Web: www.vectron.com Rev: 20Jun06