MQF90.0-3000-10

Specification for monolithic crystal filter: 1. General 1.1. Case: MQF 90.0–3000/10 01 February 2007 Terminate plate materials: Ni / Au Ni > 2.0 µm Au > 0.75 µm 1.2. 1.3. 1.4. 1.5. 1.6. 2. 2.1. 2.2. 2.2.1. 2.2.2. 2.2.3. 2.3. 2.3.1. 2.3.2. 2.3.3. 2.4. 2.5. 2.5.1. 2.5.2. 2.5.3. 2.5.4. 2.6. 2.7. 2.7.1 3. Type name: Number of poles: Operating temperature range: Operaable temperature range: Storage temperature range: Electric values Nominal centre frequency fo: Pass band Bandwidth between 3 dB - frequencies: Ripple: Insertion loss: ( measured on smallest attenuation in pass band ) Stop band fo ± 50 kHz Alternate attenuation: Spurious response: Group delay: MQF 90.0-3000/10 2 -20°C to +85°C -40°C to +85°C -55°C to +125°C 90.0 MHz > ± 15 kHz < 0.5 dB at fo ± 7.5 kHz < 1.0 dB fo ± 50 kHz…500kHz fo ± 15 kHz > 16 dB > 30 dB > 10 dB < 6 µs 90.10 / 90.20 89.90 / 89.80 -10 dBm > 30 dBm 3000 Ω // - 0.7 pF -10 dBm + 5 dBm M90A1 tft yyww Intermodulation frequency 1 / 2 frequency 3 / 4 input power level IP3 Terminating impedance ( input and output ): Nominal input power level Maximum input power level Marking on the case: 4. Environment conditions: according to Telefilter CF001 ____________________________________________________________________________________ Edited by: date: _______________________ name: ________________________