MX-170

Oven Controlled Crystal Oscillator MX-170 MX-170 Description The MX-170 is a high stability single oven oscillator that offers sub part per billion stability levels in a compact industry standard package. The MX-170 is the ideal foundation for high stability frequency reference solutions. Features • • • • • Ultra-High Stability Excellent Temperature Stability SC-Cut Crystal Frequency Range: 5 MHZ to 15 MHZ Low Package Height Applications • CDMA2000, WiMax, LTE and UMTS Base Stations • Test and Measurement Equipment • Broadcast Reference Standard Performance Specifications Performance Specifications Frequency Stabilities1 Parameter vs. operating temperature range (referenced to +25°C) Min -0.4 -0.5 -0.6 -0.7 -0.8 -1 Typ Max +0.4 +0.5 +0.6 +0.7 +0.8 +1 +50 +0.5 +0.1 +0.5 +0.1 +20 +10 5 Units ppb ppb ppb ppb ppb ppb ppb ppb ppb ppb ppb ppb ppb minutes Condition 0°C to +70°C (height code 1 only) 0°C to +70°C (height code 0,1) -20°C to +70°C (height code 1 only) -20°C to +70°C (height code 0,1) -40°C to +85°C (5V supply, height code 1 only) -40°C to +85°C (5 V supply, height code 0,1) at time of shipment, nominal EFC Vs ± 5% Load ± 5% after 72 hours of operation after 7 days after 72 hours of operation Initial Tolerance vs. supply voltage change vs. load change vs. aging / day vs. aging / day vs. aging / 1 year vs. aging / year (following years) Warm-Up time -50 -0.5 -0.1 -0.5 -0.1 -20 -10 to ± 10 ppb of final frequency (1 hour) @25°C Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Supply Parameter Supply voltage (Standard) Supply voltage (Option) Power consumption @+5V (warm-up) Power consumption @+5V (steady state) Power consumption @+12V (warm-up) Power consumption @+12V (steady state) Min 4.75 11.4 Typ 5.0 12.0 Max 5.25 12.6 4 2 4 2 Units VDC VDC Watts Watts Watts Watts Condition steady state @ +25°C steady state @ +25°C RF Output Signal [Option] Load Signal Level (Vol) Signal Level (Voh) Duty cycle Signal [Standard] Load Output Power Harmonics Sub-Harmonics ±0.15 ±0.2 +5.0 50 +7.0 +9.0 -40 -40 3.5 45 55 Sinewave ohm dBm dBc dBc 50 Ohm load 50 Ohm load 50 Ohm load 15 0.5 HCMOS pF VDC VDC % with 15pF load with 15pF load (Voh-Vol)/2 Frequency Tuning (EFC) Tuning Range Linearity Control Voltage Range Tuning Slope 0 +2.5 ±0.25 5 +5.0 Positive ppm % VDC Additional Parameters -95 -125 Phase Noise @ 10 MHz -140 -145 -145 Short Term Stability Weight Processing & Packing 3 55 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz e-12 g Handling & processing note 1 Hz 10 Hz 100 Hz 1 KHz >10 KHz 1 second tau Absolute Maximum Ratings Supply Voltage Output Load Operable temperature range Storage temperature range -55 -55 15 50 25 +85 +125 VDC pF ohm °C °C with HCMOS signal with Sinewave signal Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Outline Drawing / Enclosure Dimensions in mm Type A Code 0 1 Height “H” 15 19 Pin Length “L” 6.35 6.35 Pin Connections 1 2 3 4 5 Electronic Frequency Control (EFC) N/C RF Output Ground (Case) Supply Voltage Input (Vs) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Ordering Information MX - 170 0 - D A J - 400 1 - 10M0000000 Product Family MX: OCXO Package 36 x 27 mm Height 0: 15mm 1: 19 mm Supply Voltage B: 12 Vdc D: 5 Vdc RF Output Code A: HCMOS E: Sinewave Frequency Frequency Control 0: Fixed Frequency (No EFC) 1: Electrical Tuning (EFC) Stability Code 109:±1 ppb (temp code E, height code 0,1) 800: ±0.8ppb (temp code E, height code 1) 700: ±0.7ppb (temp code J, height code 0,1) 600: ±0.6ppb (temp code J, height code 1) 500: ±0.5ppb (temp code T, height code 0,1) 400: ±0.4ppb (temp code T, height code 1) Temperature Range E: -40°C to +85°C (Supply Voltage D only) J: -20°C to +70°C T: 0°C to +70°C Notes: 1. Contact factory for improved stabilities or additional product options. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 USA: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Europe: Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Asia: Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 02-14-12