OX-0411-BET-108

OX-041 Oven Controlled Crystal Oscillator OX-041 Features • Low Phase Noise • High Stability • SC-Cut Crystal Standard • Frequency Range: 5 MHZ to 20 MHZ • Previous Model: C4710, CO-724, CO-725, 6012, MC886 series, CO-714, CO-717 • • • • Applications Test Equipment Frequency Synthesizers Position Location Satellite Communications Performance Speci cations Parameter vs. operating temperature range (referenced to +25°C) Min -30 -25 -20 -10 -100 -2.0 -2.0 -1.0 -100 -50 Typ Max +30 +25 +20 +10 +100 +2.0 +2.0 +1.0 +100 +50 5 Units 1 Condition -40… +85°C -40… +70°C -20… +70°C 0… +70°C at time of shipment, nominal EFC Vs ± 5% Load ± 5% after 72 hours of operation after 72 hours of operation to ± 10ppb of nal frequency (1 hour reading) @ +25°C Frequency Stabilities ppb ppb ppb ppb ppb ppb ppb ppb ppb ppb minutes Initial Tolerance vs. supply voltage change vs. load change vs. aging / daily vs. aging / 1 year vs. aging / year (following years) Warm-up Time Supply Voltage (Vs) Supply voltage (Standard) Supply voltage (Option) Oscillator Power Consumption Oven Power Consumption 11.4 14.25 12.0 15.0 12.6 15.75 0.5 6.0 2.0 VDC VDC Watts Watts Watts during warm-up steady state @ +25°C Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Speci cations Parameter Signal (Standard) Load Output Power Harmonics Duty cycle Signal (Option) Load Signal Level (Vol) Signal Level (Voh) Duty cycle +4.5 45 55 15 +0.5 40 +3.0 Min Typ Max RF Output Units Condition Sinewave 50 +5.5 +8.0 -30 60 HCMOS pF VDC VDC % @ (Voh-Vol)/2 ohm dBm dBc % 50 ohm load 50 ohm load Frequency Tuning (EFC) Tuning Range Linearity Tuning Slope Control Voltage Range 0.0 2.5 ±0.75 ±1.25 ±2.0 20 Positive 5.0 VDC ppm % Additional Parameters1 Reference Voltage Phase Noise (Standard) @10 MHZ 3 4.9 5.0 5.1 -80 -120 -140 -145 -150 -95 -125 -150 -160 -165 100 VDC dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz g Handling & processing note 1 Hz 10 Hz 100 Hz 1 KHz 10 KHz 1 Hz 10 Hz 100 Hz 1 KHz 10 KHz Phase Noise3 (Option) @ 10 MHZ Weight Processing & Packing Supply voltage (Vs) Output Load Operable temperature range Storage temperature range -55 -55 Absolute Maximum Ratings 28 50 25 +85 +125 V pF ohm °C °C with HCMOS signal with Sinewave signal Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Outline Drawing / Enclosure Dimensions in [mm] inches Type A Code 0 1 Height “H” 26.42 20.00 Pin Length “L” 6.35 6.35 Pin Connections 1 2 3 4 5 6 7 Oven Return Oscillator Supply Electronic Frequency Control (EFC) Oven Supply RF Output Oscillator and Case Ground Ground (Case) Dimensions in [mm] inches Type B Code 2 3 Height “H” 26.42 20.00 Pin Length “L” 6.35 6.35 Pin Connections 1 2 3 4 5 Electronic Frequency Control (EFC) Reference Voltage Output RF Output Ground (Case) Supply Voltage Input (Vs) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Outline Drawing / Enclosure Dimensions in [mm] inches Type C Code 4 5 6 Height “H” 26.42 20.00 25.40 Pin Length “L” 6.35 6.35 6.35 Pin Connections 1 2 3 4 5 Electronic Frequency Control (EFC) Reference Voltage Output RF Output Ground (Case) Supply Voltage Input (Vs) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Ordering Information OX - 041 0 - B A T-108 Product Family OX: OCXO Package 50 x 50 mm Height 0: A26.42mm 1: A20.00mm 2: B26.42mm 3: B20.00mm 4: C26.42mm 5: C20.00mm 6: C25.40mm Supply Voltage A: 15 Vdc B: 12 Vdc 0 - 10M0000000 Frequency Phase Noise Option 0: Standard 1: Option Temperature Range / Stability Code E-308: -40°C to +85°C, ±30ppb D-258: -40°C to +70°C, ±25ppb J-208: -20°C to +70°C, ±20ppb T-108: 0°C to +70°C, ±10ppb RF Output Code A: HCMOS E: Sinewave Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modi cation. 5. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 3/24/2009 daf Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com