OX-0600-AAJ-509

OX-060 Oven Controlled Crystal Oscillator OX-060 Features • • • • • Very High Stability Low Aging SC-Cut Crystal Standard Frequency Range: 4 MHZ to 15 MHZ Previous Model: C4650, 4884 • • • • Base Stations Test Equipment Synthesizers Digital Switching Applications Performance Speci cations Parameter vs. operating temperature range (referenced to +25°C) Initial Tolerance vs. supply voltage change vs. load change vs. aging / day vs. aging / 1 year vs. aging / year (following years) Warm-up Time Min -10 -7 -5 -250 -1.0 -1.0 -0.5 -50 -30 Typ Max +10 +7 +5 +250 +1.0 +1.0 +0.5 +50 +30 10 Units 1 Condition -40… +70°C -20… +70°C 0… +70°C at time of shipment, nominal EFC Vs ± 5% Load ± 5% after 72 hours of operation after 72 hours of operation to ± 10ppb of nal frequency (1 hour reading) @ +25°C Frequency Stabilities ppb ppb ppb ppb ppb ppb ppb ppb ppb minutes Supply Voltage (Vs) Supply voltage (Standard) Supply voltage (Option) Power consumption 11.4 14.25 12.0 15.0 12.6 15.75 6.0 1.5 VDC VDC Watts Watts during warm-up steady state @ +25°C Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Speci cations Parameter Min Typ Max RF Output Signal (standard) Load Signal Level (Vol) Signal Level (Voh) Duty cycle Signal (Option) Load Output Power Harmonics +5.0 4.5 40 50 +7.0 +9.0 -30 60 Sinewave ohm dBm dBc 50 ohm load 50 ohm load 15 0.5 HCMOS pF V V % with 15pF load with 15pF load @ (Voh-Vol)/2 Units Condition Frequency Tuning (EFC) Tuning Range Linearity Tuning Slope Control Voltage Range 0.0 2.5 ±0.3 ±0.6 ±1.0 20 Positive 5.0 VDC ppm % Additional Parameters1 Reference Voltage Phase Noise (@ 10 MHz) 3 4.7 4.9 5.1 -95 -125 -145 -150 -155 53.0 VDC dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz g Handling & processing note 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz Weight Processing & Packing Supply voltage (Vs) Output Load Operable temperature range Storage temperature range -55 -55 Absolute Maximum Ratings 28.0 50 25 +85 +125 V pF ohm °C °C with HCMOS signal with Sinewave signal Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Outline Drawing / Enclosure Dimensions in mm Type A Code 0 Height “H” 25.4 Pin Length “L” 6.40 Pin Connections 1 2 3 4 5 Ground (Case) Electronic Frequency Control Input(EFC) Reference Voltage Output Supply Voltage Input (Vs) RF Output Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Ordering Information OX - 060 0 - B A T - 108 Product Family OX: OCXO Package 41 x 50 mm Height 0: A25.4mm Supply Voltage A: 15 Vdc B: 12 Vdc RF Output Code A: HCMOS E: Sinewave 0 - 10M0000000 Frequency Option 0: No Option Stability Code 108: ±10ppb 709: ±7ppb 509: ±5ppb Temperature Range D: -40°C to +70°C J: -20°C to +70°C T: 0°C to +70°C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modi cation. 5. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 2/23/2009 daf Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com