Clock Oscillator
PX-501
Features Reflow Process Compatible Surface Mount Package AT-Cut Crystal SONET Minimum Clock Specification Low Phase Noise Tight Tolerances
Typical Applications Base Stations Test Equipment Synthesizers
Previous Vectron Model Number Frequency Range Standard frequencies
C1310 1 MHz – 700 MHz 10; 20; 24.705; 30.720; 32.768; 50; 68.768; 76.8; 77.76MHz; 100; 125; 150; 155.52; 156.25; 175; 200; 250; 280; 312.5MHz; 340; 400; 622,08 MHz
Frequency stabilities1 [Standard]
Parameter
vs. operating temperature range (Referenced to +25°C)
Min
-10.0
Typ
Max
+10.0
Units
ppm
Operating temperature range
-20 … +70°C
Parameter
Initial tolerance vs. supply voltage change vs. load change vs. aging vs. aging /1. Year
Min
-5.0 -1.0 -1.0 -3.0 -1.0
Typ
Max
+5.0 +1.0 +1.0 +3.0 +1.0
Units
ppm ppm ppm ppm ppm
Operating temperature range
VS ± 5% Load ± 5%
/ year (followingYears)
htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 PX-501 page: 1/7
Frequency stabilities1 [meets SONET Minimum Clock Specification-Option]
Parameter
vs. operating temperature range
Min Min
-20.0
Typ Typ
Max Max
+20.0
Units Units
ppm
Operating temperature range
-20 … +70°C
Parameter
overall tolerance
Conditions
( 15 Years aging, temp, initial, supply, load )
Supply Voltage (Vs)
Parameter
Supply voltage (Vs) Current consumption Current consumption Supply voltage (Vs) Current consumption Current consumption Current consumption 3.135 3.3
Min
4.75
Typ
5.0
Max
5.25 40 90 3.465 30 80 25
Units
VDC mA mA VDC mA mA mA
Condition
@ HCMOS < 155 MHz @ PECL < 155 MHz
@ LVHCMOS< 155 MHz @ LVPECL< 155 MHz @ LVDS< 155 MHz
RF Output
Parameter
Signal Load Rise and Fall Time Duty cycle Signal Load Rise and Fall Time Duty cycle Signal Load Rise and Fall time Duty cycle Signal Load Output Power -3 50 0 3 40 Sinewave Ω dBm 100 1 60 45 LVDS Ω ns % 10 to 90 % 50 1 55 40 PECL Ω ns % Vs-2V 20-80% 15.0 5 60
Min
Typ
HCMOS
Max
Units
pF ns %
Condition
@15 pF 10 to 90% @Vs/2
Additional Parameters
Parameter
Phase Noise
Min
Typ
-85 -120 -145 -155 -160
Max
Units
dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS 10 100 1 10 100
Condition
Hz Hz kHz kHz kHz @ 12 kHz to 20 MHz @49,408 MHz HCMOS 3,3V
Jitter
0,2
htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 PX-501 page: 2/7
Additional Parameters
Parameter
Phase Noise
Min
Typ
-80 -115 -135 -141 -141
Max
Uniits
dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS 10 100 1 10 100
Condition
Hz Hz kHz kHz kHz @ 12 kHz to 20 MHz @125 MHz PECL 3,3V
Jitter
0,6
Parameter
Phase Noise
Min
Typ
-62 -93 -124 -142 -143
Max
Units
dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS 10 100 1 10 100
Condition
Hz Hz kHz kHz kHz @ 12 kHz to 20 MHz @400 MHz PECL 3,3V
Jitter Weight Processing & Packing
0,2 2 handling & processing note
g
Absolute Maximum Ratings
Parameter
Supply voltage (Vs) Operable temperature range Storage temperature range -30 -40
Min
Typ
Max.
7 +80 +90
Units
V °C °C
Condition
htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 PX-501 page: 3/7
Enclosure
Type G223 “A” for HCMOS and LVHCMOS Version
Options5 Height “H” 5,9 Pin Length “L” NA
Type G218 “B” for HCMOS; PECL; LVPECL and LVDS Version
Height “H” 5,9 Pin Length “L” NA Options5 Pin 5 No Data compl. Data compl. Data
Dimensions: mm
Dimensions: mm
Pin Connections
1 NC / Enable (optional) 2 Ground (Case) 3 RF Output 4 Supply Voltage Input (Vs) 1 N/C
Pin Connections
2 N/C / Enable (optional) 3 Ground (Case) 4 RF Output 5 Complementary RF Output / (N/C: HCMOS only) 6 Supply Voltage Input (Vs)
Outline Drawing: G223B Enable true table Pin 2 High Open Low
Outline Drawing: G218B HCMOS Pin 4 Data Data High Tristate Pin 5 N/C N/C N/C LVPECL / LVDS Pin 4 No Data Data Data
Marking
PX-501 Frequency ● AYYWW
htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 PX-501 page: 4/7
Typical Phase Noise and Jitter
49,408 MHz; HCMOS output 125 MHz; PECL output
Frequency range [Hz]
12kHz to 20MHz
Jitter [ps rms]
0.188ps
Frequency range [Hz]
12kHz to 20MHz
Jitter [ps rms]
0.608ps
(400 MHz; PECL output)
Typical frequency stability vs temperature
Frequency range [Hz]
12kHz to 20MHz
Jitter [ps rms]
0.140ps
1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability.
Notes:
htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 PX-501 page: 5/7
Standard Shipping Methode
Lage im Gurt Position in tape Pin 1
A X B P
*bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line
Abwickelrichtung Unwinding direction
K
Gurtunterseite Tape buttom side Gurtoberseite Tape upper side
Production tolerance complying DIN IEC 286-3
Enclosure Type
G218B / G223B
Tape width W [mm]
24
Quantity per meter
83,3
Quantity per reel
850
Dimension P
12
Recommanded Reflow Profile
Profile Feature
Average ramp-up rate (TL to Tp) Preheat -Temperature Min Tsmin -Temperature Min Tsmax -Time (min to max) (ts)
Pb-Free Assembly/ Sn-Pb Assembly
3°C/second max. 150°C 200°C 60-180 seconds 3°C/second max 217°C 60-150 seconds max 260°C
Profile Feature
Time 25°C to Peak Temperature Time maintainted above -Temperature (TL) -Time (tL)
Pb-Free Assembly/ Sn-Pb Assembly
8 minutes max. 217°C 60-150 seconds
TSmax to TL-Ramp-up Rate Time maintainted above -Temperature (TL) -Time (tL) Peak Temperature (TP)
Time within 5°C of actual Peak Temperature (tP) Ramp-down Rate
20-40 seconds 6°C/ second max
Note: All temperatures refer to topside of the package, measured on the package body surface. SMD oscillators must be on the top side of the PCB during the reflow process.
htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 PX-501 page: 6/7
How to order this product:
Use this worksheet to forward the following information to your factory representative: Model PX-501 Height 0 Supply Voltage Code E RF Output Code A Temperature Range J Stability 105 X X Frequency 10MHz
Height: 0: A 5,9 mm 1: B 5,9 Supply Voltage Code: E: D: 3,3 V 5V
RF Output Code: A: HCMOS C: PECL D: LVDS E: Sinewave
Temperature Range/Stability Code: J-105: -20...+70°C ±10ppm J-205: -20...+70°C ±20ppm over all
htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 PX-501 page: 7/7
