PX-508

PX-508 Clock Oscillator Low G-Sensitivity PX-508 Features • • • • Low G-Sensitivity Vibration hardened Tight Tolerances Low Phase Noise • • • • Applications Vibration Environment Airborne and Military Equipment Portable Equipment Tactical Weapons Performance Specifications2 Frequency Stabilities1 (Frequency Range - 10 to 120 MHz) Parameter vs. operating temperature range (referenced to +25°C) Min -15.0 -25.0 -40.0 -10.0 -3.0 -2.0 -1.0 -5.0 Typical Max +15.0 +25.0 +40.0 +10.0 +3.0 +2.0 +1.0 +5.0 Units ppm ppm ppm ppm ppm ppm ppm ppm Condition Options4 -20 to +70°C -40 to +85°C -55 to +105°C 25°C VS ±5% static Load ±10% static after 30 days of operation after 30 days of operation Initial tolerance vs. supply voltage change vs. load change vs. aging / 1 year vs. aging / 10 years Page 1 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications2 Supply Voltage (Vs) Parameter Supply voltage (standard) Current consumption Supply voltage Current consumption Signal [standard] Load Signal Level (Vol) LVCMOS Signal Level (Voh) LVCMOS Signal Level (Vol) HCMOS Signal Level (Voh) HCMOS Duty Cycle Rise and Fall time 4.5 40 60 5 % ns 3.0 0.5 13.5 Min 3.135 4.75 Typical 3.3 5.0 Max 3.465 30 5.25 40 Units VDC mA VDC mA Condition Option4 @ 77.76 MHz LVCMOS 3.3 V @ 120 MHz LVCMOS 3.3 V @LVCMOS @HCMOS RF Output LVCMOS/HCMOS 15 16.5 0.3 pF VDC VDC VDC @ Vs=3.3V and 15pF Load @ Vs=3.3V and 15pF Load @ Vs=5.0V and 15pF Load @ Vs=5.0V and 15pF Load @ (Voh-Vol)/2 @15 pF 10 to 90 % Additional Parameters -100 -128 -143 -153 -155 0.101 -90 -122 -142 -148 -155 0.062 8.0 Handling & Processing Note dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS g 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz @ 12 kHz to 20 MHz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz @ 12 kHz to 20 MHz Phase Noise3 Jitter Phase Noise3 Jitter Weight Processing & Packing Additional Environmental Conditions Random Vibration MIL-STD-202G; Method 214A; Condition II-J 1g2/Hz / 43.92 grms guaranteed (Qualification testing performed at MIL-STD-202G; Method 214A; Condition II-K, 1.5g2/Hz / 53.79 grms) Test Condition B 50 g (Qualification testing performed at MILSTD-883; Method 2007; Test Condition C 70 g) 5000 g / 0.3 ms higher values on request Sine Vibration MIL-STD-883; Method 2007 Shock Solderability Solvent Resistance MIL-STD-883G; Method 2002.4; Condition D JEDEC J-STD-002 100% RoHS 6 compliant non-washable device Absolute Maximum Ratings supply voltage (Vs) Output Load Operable Temperature Range Storage Temperature Range -55 -55 6.0 50 +105 +105 V pF °C °C Page 2 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Outline Drawing / Enclosure PX-508 Height “H” 6.2 Pin Length “L” NA Pin Connections 1 2 3 4 5 6 7 8 9 10 N/C N/C N/C / Enable (optional) Ground (Case) NC NC RF-Output NC Supply Voltage (Vs) NC Enable true table (optional) Pin 3 High Open Low Dimensions in mm Pin 7 Data Data High Tristate Typical Phase Noise @ 120 MHz HCMOS Typical Phasenoise: PX-508 @ 120MHz -70 -80 -90 -100 Phase Noise [dBc/Hz] -110 -120 -130 -140 -150 -160 -170 10 100 1000 10000 Offset Frequency [Hz] 100000 1000000 Page 3 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Typical G-Sensitivity @120 MHz; HCMOS G-Sensitivity: PX-508; 120MHz; 0,06g2/Hz 1,00 0,90 0,80 G-Sensitivity [ppb/g] Vibration spectrum 0,1 X-Axis Y-Axis Z-Axis Total PSD [g /Hz] 0,70 0,60 0,50 0,40 0,30 0,20 0,10 0,00 10 100 Frequency [Hz] 1.000 0,01 2 0,001 0,0001 10.000 10 100 Frequency [Hz] 1.000 10.000 Phase noise: PX-508; 120MHz; 0,06g2/Hz -60 X-Axis Y-Axis Z-Axis Calculation equation according to Vig-Tutorial g-sensitivity: G= -70 Phase Noise [dBc/Hz] 2 ⋅ fv ⋅10 Apeak ⋅ f 0 L ( fv ) 20 -80 Peak g-level: Apeak = PSD ⋅ 2 Oscillator -90 Z Y -100 -110 X -120 10 100 Offset Frequency [Hz] 1.000 10.000 Typical Frequency Stability vs Temperature Frequency vs. temperature -20°C to +70°C 15,0 10,0 5,0 25,0 20,0 15,0 10,0 Frequency vs. temperature -40°C to +85°C df [ppm] df [ppm] 5,0 0,0 -5,0 -10,0 -15,0 -20,0 0,0 -5,0 -10,0 -15,0 -20 -10 0 10 20 30 40 50 60 70 Temperature [°C] -25,0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 Temperature [°C] Page 4 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Standard Shipping Method (PX-508) Lage im Gurt Position in tape Pin 1 A X B K P *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Abwickelrichtung Unwinding direction Gurtunterseite Tape buttom side Gurtoberseite Tape upper side Enclosure Type G301 Tape Width W (mm) 24 Quantity per meter 83,3 Quantity per reel 850 Dimension P 12 Recommended Reflow Profile Profile Feature Average ramp-up rate (TL to TP) Preheat -Temperature Min TSmin -Temperature Min TSmax -Time (min to max) tS Pb-Free Assembly/ Sn-Pb Assembly 3°C/second max. 150°C 200°C 60-180 seconds 3°C/second max 217°C 60-150 seconds max 260°C Profile Feature Time 25°C to Peak Temperature Time maintained above -Temperature (TL) -Time (tL) Pb-Free Assembly/ Sn-Pb Assembly 8 minutes max. 217°C 60-150 seconds TSmax to TL -Ramp-up Rate Time maintained above -Temperature (TL) -Time (tL) Peak Temperature (TP) Time within 5°C of actual Peak Temperature (tP) Ramp-down Rate 20-40 seconds 6°C/ second max Note: All temperatures refer to topside of the package, measured on the package body surface. Page 5 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Ordering Information PX - 508 Product Family PX: XO 0 - E A E - 405 X - 10M0000000 Frequency Package Low G-Sensitivity SMD version: 508 Height 0: 6.2 mm Supply Voltage D: 5V E: 3.3V RF Output Code A: LVCMOS / HCMOS Stability Code J-155: ±15 ppm E-255: ±25 ppm B-405: ±40 ppm Frequency Control X: NA Temperature Range J: -20°C to +70°C E: -40°C to +85°C B: -55°C to +105°C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Contact factory for availability. Subject to technical modification. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 7268.801.100 Fax: +49 (0) 7268.801.282 Asia: Vectron International 1589 Century Avenue, the 19th Floor Chamtime International Financial Center Shanghai, China Tel: 86.21.6081.2888 Fax: 86.21.6163.3598 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 06/2011 Page 6 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com