TX-400_10

TX-400 Temperature Compensated Crystal Oscillator TX-400 Features • EFC Standard • Hermetic • Frequency Range: 2 MHZ to 200 MHZ • Previous Model: C2400, TQDILTC; 979; 979W, 959; 959W, TC-400 • • • • Applications PCS Base Stations Land Mobile Radio Cellular Telephony Radio in the Local Loop Performance Speci cations Parameter vs. operating temperature range (referenced to +25°C) Min -2.5 -2.0 -1.5 -1.0 -2.0 -1.5 -1.0 -1.5 -1.0 -1.5 -1.0 -0.5 -2.5 -0.2 -0.2 Typ Max +2.5 +2.0 +1.5 +1.0 +2.0 +1.5 +1.0 +1.5 +1.0 +1.5 +1.0 +0.5 +2.5 +0.2 +0.2 Units 1 Condition -40… +85°C -40… +85°C -40… +85°C -40… +85°C -20… +70°C -20… +70°C -20… +70°C 0… +70°C 0… +70°C 0… +50°C 0… +50°C 0… +50°C at time of shipment, nominal EFC Vs ± 5% Load ± 10% Frequency Stabilities ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm/yr VDC VDC mA mA mA mA mA Initial Tolerance vs. supply voltage change vs. load change vs. aging Supply voltage Supply voltage Current consumption 1.0 3.135 4.75 3.3 5.0 3.465 5.25 15 50 18 20 50 Supply Voltage (Vs) @ +25°C & 3.3VDC & clipped sinewave, sine @ +25°C & 3.3VDC & CMOS @ +25°C & 5.0VDC & clipped sinewave, sine @ +25°C & 5.0VDC & PECL @ +25°C & 5.0VDC & CMOS RF Output Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Speci cations Parameter Signal Load Signal Level (Vol) Signal Level (Voh) Duty cycle Signal Load R || C Output Power Signal Load Signal Level (Vol) Signal Level (Voh) Duty cycle Rise/Fall Time Signal Load Output Power Harmonics / sub-harmonics >100MHz Spurious 0 Vdd-1.04 40 60 3 Sinewave 50 6 -20 -60 ohm dBm dBc dBc 50 Vcc-1.6 9 9 0.7 PECL ohm V V % ns 4.5 3.0 40 50 60 Clipped Sinewave 10 10 11 11 kohm pF Vpp @ 10Kohm||10pF 5 pin dip to Vcc -2V 13.5 Min Typ 15 Max 16.5 +0.5 +0.3 Units pF V V % Condition HCMOS with Vs=5.0V and 15pF load with Vs=3.3V and 15pF load with Vs=5.0V and 15pF load with Vs=3.3V and 15pF load @ (Voh-Vol)/2 Frequency Tuning (EFC) Tuning Range Tuning Range Linearity Tuning Slope Control Voltage Range Freq. control input impedance 0.3 0.5 10 ±8.0 Fixed Frequency ±12.0 ±20.0 10 Positive 1.65 2.5 3.0 4.5 VDC VDC kohm with Vs=3.3VDC with Vs=5.0VDC ppm % Initial Accuracy ±2.5 ppm @ +25°C Additional Parameters1 Phase Noise3 (@ 40 MHz) -90 -120 -140 -150 -60 -95 -125 -135 -150 6.0 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/hz dBc/Hz dBc/Hz g Handling & processing note 10 Hz 100 Hz 1 kHz 10 kHz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz Phase Noise3 (@ 100 MHz) Weight Processing & Packing Absolute Maximum Ratings Supply voltage (Vs) Control Voltage Maximum output load @ CMOS 0 6.0 Vs 50 V V pF Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Standard Shipping Method A X B P K *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Lage im Gurt Position in tape Pin 1 Abwickelrichtung Unwinding direction Gurtunterseite Tape buttom side Gurtoberseite Tape upper side Production tolerance complying DIN IEC 286-3 Enclosure Type Type B Type C Tape width W [mm] 44 44 Quantity per meter 50 50 Quantity per reel 300 300 Dimension P 20 20 Recommended Re ow Pro le Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Outline Drawing / Enclosure Dimensions in mm Dimensions in mm Dimensions in inches Type A Code 0 1 2 Height “H” 7.5 8.0 10.1 20,7max. 15,24 ±0,3 12,2 ±0,5 Type B Pin Length “L” 5.85 5.85 5.85 Code 3 Height “H” 9.4 Pin Length “L” NA Code 4 Type C Height “H” 0.45 Pin Length “L” NA G 125 H = 7,5max.; 4,58 ±0,5 7,62 ±0,3 5,85min. H 1 7 14 8 0,8max. ø0,45 2,3 13,1max. Pin Connections 1 7 8 14 Electronic Frequency Control (EFC) Ground (Case) RF Output Supply Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Ordering Information TX - 400 0 - D A J - 206 Product Family TX: TCXO Package 13 x 20 mm Height 0: A 7.5mm 1: A 8.0mm 2: A 10.1mm 3: B 9.4mm 4: C 0.45” Supply Voltage D: 5 Vdc E: 3.3 Vdc RF Output Code A: HCMOS C: PECL E: Sinewave F: Sinewave, clipped 0 - 10M0000000 Frequency Tuning Option 0: No Tuning (Fixed Frequency) 1: Electrical Frequency Adjust (EFC) Stability Code 256: ±2.5ppm 206: ±2.0ppm 156: ±1.5ppm 106: ±1.0ppm 507: ±0.5ppm Temperature Range E: -40°C to +85°C J: -20°C to +70°C T: 0°C to +70°C P: 0°C to +50°C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modi cation. 5. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 02/22/2010 dab Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com