VL-821-HAE-SA

VL-821 CMOS Crystal Oscillator Previous Vectron Model VCS3 VL-821 Description Vectron’s VL-821 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output, operating off either a 1.8, 2.5, or 3.3 volt supply. The VL-821 utilizes a high performance, low frequency quartz resonator followed by a custom ASIC to synthesize the output frequency. Features • • • • • • • • Applications • • • • • • SONET/SDH/DWDM Ethernet, GE, SynchE Storage Area Networking Digital Video Broadband Access Microprocessors/DSP/FPGA Quick delivery CMOS Output 3.2mm x 2.5mm x 1.2mm Output frequencies to 200.00 MHz Tri-state output for the board test and debug -10/70°C or -40/85°C operating temperature Gold over nickel contact pads Product is compliant to RoHS directive and fully compatible with lead free assembly Block Diagram VDD Crystal Output Osc PLL E/D Gnd Page1 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Table 1. Electrical Performance, 3.3V Option Parameter Operating Supply Voltage 1 Symbol VDD IDD Min Supply 2.97 -0.05 Typical 3.3 Maximum 3.63 5.0 10 15 20 25 Units V V mA Absolute Maximum Operating Voltage Supply Current, Output Enabled 10MHz Duty Cycle3 Output Enable/Disable Output Enable Output Disable Start-Up Time Operating Temp, (Ordering Option) 1] 2] 3] 4] 5] 5 VOH VOL IOH IOL tR/tF SYM 0.9*VDD 0.1*VDD 8 8 3 2 45 Enable/Disable 50 55 V V mA mA ns ns % VIH VIL tSU TOP 0.7*VDD 0.3V*DD 2 -10/70 or -40/85 V V ms °C A 0.01 uF and a 0.1uF capacitor should be located as close to the supply as possible (to ground). VDD supply ramp should be