VX-704

VX-704 Voltage Controlled Crystal Oscillator VX-704 Features 5X7 Surface Mount Package Reflow Process Compatible Optional ACMOS, TTL and LVPECL Typical Applications Base Stations Test Equipment Telecom & Wireless Infrastructure Digital Switching Previous Vectron Model Numbers Frequency Range Standard Frequencies C5250, MC025, MC031, MC034, and MC035 1 MHz – 800 MHz 19.44, 32.768, 44.736, 51.84, 77.76, 155.52, 622.08 MHz Frequency Stabilities1 Parameter vs. operating temperature range (Referenced to +25°C) Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging vs aging / year / year (following years) Min -500 -2 -1 -5 -1 ±3 Typ Max +500 +2 +1 +5 +1 Units ppb ppm ppm ppm ppm Min Typ Max Units Operating temp range 0 … +70°C -40 … +85°C Condition at time of shipment, nominal EFC VS ± 5% Load ± 5% Options5 http://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 RF Output Parameter Signal Load Signal Level (Vol) Signal Level (Voh) 4.5 3.0 10 Rise and fall times for ACMOS (measured 10% to 90%) 45 40 TTL 10 0.5 4.5 5 3 45 40 PECL 50 -1.62 -1.025 10 1000 600 45 40 55 60 5 1 40 ohm VDC VDC ms ps ps % % ps ps ps < 100 MHz >= 100 MHz @ 50% Vdd @ 50% Vdd BW = 10Hz to 20 MHz BW = 12 kHz to 20 MHz 10,000 samples- Rising edge Into Vs-2V or Thevenin Equivalent 55 60 pF VDC VDC ns ns % % with Vs=5.0V and 15pF load with Vs=5.0V and 15pF load 1.0 to 23.9 MHz 24.0 to 125 MHz @ 1.4V < 15 MHz @ 1.4V >= 15 MHz 5 3 Duty cycle Signal Load Signal Level (Vol) Signal Level (Voh) Rise and fall times for TTL (measured 0.8V to 2.0V) Duty cycle Signal Load Signal Level (Vol) Signal Level (Voh) Startup Time Rise and fall times for PECL (measured 20% to 80%) Duty cycle Jitter (rms) Period Jitter (pk-pk) 55 60 15 Min Typ Max ACMOS 50 0.5 0.3 pF VDC VDC VDC VDC ns ns ns % % with Vs=5.0V and 15pF load with Vs=3.3V and 15pF load with Vs=5.0V and 15pF load with Vs=3.3V and 15pF load 1.0 to 23.9 MHz 24.0 to 79.9 MHz 80.0 to 125.0MHz @ 50% Vs< 15 MHz @ 50% Vs >= 15 MHz Units Condition http://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 Supply Voltage (Vs) Parameter Supply voltage Min 4.75 Typ 5 Max 5.25 15 Current consumption 20 40 100 Supply voltage 3.135 3.3 3.465 6 8 Current consumption 12 16 60 100 Units VDC mA mA mA mA VDC mA mA mA mA mA mA ACMOS 1.0 to 14.90 MHZ ACMOS 15.0 TO 39.9 MHz ACMOS 40.0 TO 59.9 MHz ACMOS 60.0 TO 79.9 MHz ACMOS 80.0 to 125.0 MHz LVPECL No load Condition ACMOS/TTL 1.0 to 23.9 MHZ ACMOS/TTL 24 to 49.9 MHz ACMOS/TTL 50 to 80.0 MHz LVPECL No load Frequency Tuning Parameter Absolute Pull Range ±50 Linearity Tuning Slope Control Voltage Range 0.5 0.3 2.5 1.65 10 Positive 4.5 3.0 VDC VDC with Vs=5.0V with Vs=3.3V 15 ppm % Min Typ ±30 Max Units ppm Condition Options5 Condition Measured @ 52.00 MHz Measured @ 155.52 MHz ACMOS/TTL Output PECL/LVPECL Output Additional Parameters Parameter Min -60 -90 -120 -140 -145 -50 -80 -110 -133 -145 Typ dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Max 10 100 1 10 100 10 100 1 10 100 Units Hz Hz kHz kHz kHz Hz Hz kHz kHz kHz Phase Noise3 Phase Noise3 Output Enable6 Logic „0“ input = Outputs disabled (Tri-state) Logic „1“ or floating input = Outputs enabled) Logic „0“ input = Outputs disabled (Tri-state) Logic „1“ or floating input = Outputs enabled)