VXCO-5001-DAT-K

VX-500 Voltage Controlled Crystal Oscillator VX-500 Features • 9X14 J Leaded Surface Mount Package • Re ow Process Compatible Optional • ACMOS, TTL and LVPECL • Frequency Range: 1 MHZ to 800 MHZ • Previous Model: C5300, MC044, MC344, MC046, MC346, MC047, MC347, MC049, MC349, MC048, MC318, MC328, and MC348 • • • • Applications Base Stations Test Equipment Telecom & Wireless Infrastructure Digital Switching Performance Speci cations Parameter vs. operating temperature range (absolute pull range) vs. supply voltage change vs. load change vs aging / 1 year vs aging / year (following years) -2 -1 -5 -1 ±3 +2 +1 +5 +1 Supply Voltage (Vs) Supply voltage 4.75 5.0 5.25 15 20 40 100 3.135 3.3 3.465 6 8 12 16 60 100 VDC mA mA mA mA VDC mA mA mA mA mA mA ACMOS 1.0 to 14.90 MHz ACMOS 15.0 TO 39.9 MHz ACMOS 40.0 TO 59.9 MHz ACMOS 60.0 TO 79.9 MHz ACMOS 80.0 to 125.0 MHz LVPECL No load ACMOS/TTL 1 to 23.9 MHz ACMOS/TTL 24 to 49.9 MHz ACMOS/TTL 50 to 80.0 MHz LVPECL No load ppm ppm ppm ppm Min Typ Max Units Condition -40… +85°C 0… +70°C Vs ± 5% Load ± 5% Frequency Stabilities1 Current consumption Supply voltage Current consumption Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Speci cations Parameter Signal Load Signal Level (Vol) Signal Level (Voh Rise and fall times for ACMOS (measured 10% to 90%) Duty cycle Signal Load Signal Level (Vol) Signal Level (Voh Rise and fall times for TTL (measured 0.8V to 2.0V) Duty cycle Signal Load Signal Level (Vol) Signal Level (Voh Rise and fall times (measured 20% to 80%) Start-up Time Duty cycle (LVPECL) Jitter (rms) Period Jitter (pk-pk) 45 40 Vs -1.025 1000 600 10 55 60 5 1 40 Frequency Tuning (EFC) Absolute Pull Range Linearity Tuning Slope Control Voltage Range 0.5 0.3 2.5 1.65 ±30 ±50 10 15 Positive 4.5 3.0 VDC VDC with Vs=5.0VDC with Vs=3.3VDC ppm ppm % 45 40 4.5 5 3 55 60 PECL/LVPECL 50 Vs -1.62 ohm VDC VDC ps ps ms % % ps ps ps @ 50% Vdd @ 50% Vdd BW = 10Hz to 20 MHz BW = 12 kHz to 20 MHz 10,000 samples- Rising edge 100 MHz Into Vs-2V or There in Equivalent 45 40 4.5 3.0 10 5 3 55 60 TTL 10 0.5 pF VDC VDC ns ns % % Vs= 5.0V and 15pF load Vs= 5.0V and 15pF load 1.0 to 23.9 MHz 24.0 to 125.0 MHz @ 1.4V < 15 MHz @ 1.4V >= 15 MHz 15 Min Typ Max ACMOS 50 0.5 0.3 Units Condition RF Output pF VDC VDC VDC VDC ns ns ns % % Vs= 5.0V and 15pF load Vs= 3.3V and 15pF load Vs= 5.0V and 15pF load Vs= 3.3V and 15pF load 1.0 to 23.9 MHz 24.0 to 79.7 MHz 80.0 to 125.0 MHz @ 50% < 15 MHz @ 50% >= 15 MHz Additional Parameters -60 -90 -120 -140 -145 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz Phase Noise3 (@ 52 MHz) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Speci cations Parameter Min Typ Max -50 -80 -110 -133 -145