30482

8 7 6 5 4 3 2 1 REVISIONS VICOR CONFIDENTIAL THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF VICOR CORP. REV F DATE DESCRIPTION APPROVED 1 RELEASED PER E053463 LEK 11/29/05 EF 2 REVISED PER E091085 AR 07/14/09 REJH 3 REDRAWN PER E100871 DCS 6/15/10 #4-40 UNC-2B COLD FORM TAP .140 DP MIN. FROM FARSIDE DO NOT BREAK THRU (6) PL. .40 F KUK .010 MATL TO BE REMOVED E E 2.220 2.000 D D .190 .110±.010 1.800 .100 .50 3.600 C .005 C 4.60 .410 B B NOTES: 1. MATERIAL: EXTRUSION SEE SHEET 2 OF 2. 2. REMOVE ALL BURRS AND SHARP EDGES. 3. CLEAR FINISH, RoHS COMPLIANT, CHROMIUM FREE PER CST-0001 LATEST REVISION. " " DENOTES CRITICAL CHARACTERISTIC FOR LOT INSPECTION. 4. 5. DIMENSIONS ARE INCHES ONLY DRAWN KNIGHT MATERIAL SEE NOTES A FINISH 09/20/06 SEE NOTES DO NOT SCALE DRAWING 8 7 6 5 4 3 HTSNK 'A' LONG .4H LOW FLOW, THREADED UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE INCH [MM] TOLERANCES ARE: DECIMALS ANGLES X.XX [X.X] = ±0.01 [0.25] ±1° X.XXX [X.XX] = ±0.005 [0.127] THIRD ANGLE PROJECTION SWD VICOR DATE SIZE CAGE CODE C 67131 SCALE 2 : 1 2 DWG NO A REV 30482 3 SHEET 1 OF 2 1 8 7 6 5 4 3 2 1 REVISIONS VICOR CONFIDENTIAL THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF VICOR CORP. REV DATE DESCRIPTION APPROVED SEE SHEET 1 OF 2 F E F E R.035 (24) PL. SEE DETAIL A A 3.00° 1.5 EACH SIDE OF VERT R.035 .410 .200 .235 .110 D 1.756 * .133 (9) PL. R.010 (2) PL. * .060 (8) PL. * .138 (2) PL. R.018 (2) PL. * .058 (2) PL. * .269 D .023 .036 .031 +.020 2.220 - .000 .040 .017 (2) PL. .080 R.030 (8) PL. C .252 C * .030 * .060 PROFILE COMMON FOR B DETAIL A SCALE 8 : 1 30195 30718 32188 30482 NOTES: 1. MATL: ALUMINUM 6063-T5 2. * DENOTES DIMENSION TO THEORETICAL SHARP CORNER. 3. ALL DIMENSIONS ARE CRITICAL CHARACTERISTICS 4. RoHS COMPLIANT PER CST-0001 LATEST REVISION. 5. DIMENSIONS ARE INCHES ONLY DRAWN A. RAGIPANI MATERIAL SEE NOTES A FINISH 07/14/09 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE INCH [MM] TOLERANCES ARE: DECIMALS ANGLES X.XX [X.X] = ±0.01 [0.25] ±1° X.XXX [X.XX] = ±0.005 [0.127] THIRD ANGLE PROJECTION DO NOT SCALE DRAWING 7 6 5 4 3 SWD VICOR DATE SEE NOTES 8 B HTSNK 'A' LONG .4H, LOW FLOW, THREADED, EXTRUSION SIZE CAGE CODE C 67131 SCALE 4 : 1 2 DWG NO REV 30482 3 SHEET 2 OF 2 1 A