30780

8 7 6 5 4 3 2 1 REVISIONS VICOR CONFIDENTIAL THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF VICOR CORP. REV F DATE APPROVED 1/04/06 ECF DESCRIPTION 1 RELEASED PER E050372 PEI 2 REVISED PER E100841 KUK 06/22/10 F GCK 3.600 R.015 TYP .50 .58 1.800 E E .03 #6-32 UNC-2B X 0.21 DP 6 PLCS 2.100 2.40 (11) FINS EQ SP TOL. NON-CUM. D D FULL R .294 .060 TYP .04 TYP 7° TYP .15 4.60 .25 C C 32 .73 .83 1.45 0.005 B A B NOTES: 1. MATERIAL: AL. 6063-T6. 2. REMOVE ALL LOOSE AND HANGING BURRS. OTHERWISE, BURRS SHALL NOT EXCEED .003. 3. CLEAR FINISH, RoHS COMPLIANT, CHROMIUM FREE PER CST-0001, LATEST REVISION. 4. PERMANENTLY MARK PART NUMBER AND REVISION LEGIBLY IN AREA SHOWN. 5. DENOTES CRITICAL CHARACTERISTIC FOR LOT INSPECTION. 6. TOLERANCE ON ALL DIMENSIONS SHOWN AS REFERENCE SHALL FOLLOW STANDARD ALUMINUM ASSOCIATION TOLERANCE. DRAWN P.E.IENI MATERIAL FINISH DATE 11/16/05 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE INCH [MM] TOLERANCES ARE: DECIMALS ANGLES X.XX [X.X] = ±0.01 [0.25] ±1° X.XXX [X.XX] = ±0.005 [0.127] THIRD ANGLE PROJECTION DO NOT SCALE DRAWING 8 7 6 5 4 3 SWD VICOR HEATSINK EXTRUSION SIZE CAGE CODE C 67131 SCALE 2 : 1 2 DWG NO A REV 30780 2 SHEET 1 OF 1 1