31499-03

7 8 5 6 1 2 3 4 VICOR CONFIDENTIAL REV. THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF VICOR CORP. 1 DESCRIPTION RELEASE PER E160216b MTB DATE APPROVED 02/29/16 DH .385±.010 F F A B .800±.010 .333±.008 E E A 0.010 A SECTION B-B 3 A B 1 2 4 (2) PL D D REF SEE NOTE 3 5 REF SEE NOTE 3 5 C C .103 .594±.003 NO. OF TURNS BOM NO. B A 31499-01 31499-02 31499-03 31499-04 31499-05 31499-06 31499-07 31499-08 31499-09 31499-10 31499-11 31499-12 31499-13 31499-14 31499-15 31499-16 31499-17 8 90 77 57 44 34 27 22 18 14 12 10 8 6 5 4 3 44 TURNS TOL. +/+/+/+/+/+/+/+/+/+/+/+/+/+/+/+/+/- 3 2 2 1 1 1 1 1 0 0 0 0 0 0 0 0 1 uh @ 100 KHz 1V (OPEN CKT) MIN NOM MAX MIN Q @ 100 KHz 1V (OPEN CKT) 30.0 30.0 25.0 25.0 24.0 20.0 20.0 20.0 20.0 20.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 279.30 332.10 407.80 207.56 243.09 294.26 133.21 164.13 111.62 68.23 79.38 95.48 40.18 47.40 57.76 24.94 29.89 36.97 16.27 19.84 24.94 10.66 13.28 17.02 7.23 8.04 9.241 5.31 5.90 6.790 3.69 4.10 4.715 2.36 2.62 3.018 1.33 1.48 1.697 0.92 1.03 1.179 0.59 0.66 0.754 0.33 0.37 0.424 79.00 80.50 82.0 7 6 RDC mOHMS TYP. SECTION A-A MAX 220.70 260.43 132.50 156.35 68.84 81.23 40.97 48.34 29.38 24.90 13.67 16.13 9.33 11.01 6.41 7.56 3.90 4.49 2.81 3.23 1.75 2.01 1.24 1.43 0.708 0.814 0.506 0.582 0.364 0.419 0.224 0.258 40.97 48.34 5 ITEMS 2,3 AND 4 REMOVED FOR CLARITY B NOTES: 1. SEE BOM 31499-XX FOR LIST OF PARTS. 2. REFLOW SOLDER TERMINALS, ITEM 4, TO ENDS OF COIL, ITEM 2, USING 96/4 TIN/SILVER SOLDER. 3. JOIN INSULATED ROD, ITEM 3, AND COIL, ITEM 2, TO FERRITE BASKET, ITEM 1, USING APPROXIMATELY 0.015 GRAM OF ADHESIVE, ITEM 5, AT EACH OF THE 4 LOCATIONS SHOWN IN SECTION A-A. 4. ADDITIONAL ADHESIVE MAY BE ADDED TO THE ASSEMBLY TO ENSURE THE .010 PROFILE SPEC CAN BE MET. (VENDOR OPTION). 5. PARTS SHALL MEET SOLDERABILITY REQUIREMENTS PER MIL-STD-202F, METHOD 208 AFTER EXPOSURE TO 8 HRS STEAM AGING PER MIL-STD-883, METHOD 2003. 6. " " DENOTES CRITICAL CHARACTERISTICS FOR LOT INSPECTION. 7. RoHS COMPLIANT, LEAD FREE PER CST-0001 LATEST REVISION. 8. GENERAL WORKMANSHIP STANDARDS FOR MAGNETIC COMPONENTS PER WS-0002 LATEST REVISION. DRAWN BY DATE Gary Keay 2/18/2016 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE : INCH / [MM] TOLERANCES ARE: DECIMALS ANGLES X.XX [X.X] = ±0.01 [0.25] ±1° X.XXX [X.XX] = ±0.005 [0.127] THIRD ANGLE PROJECTION DO NOT SCALE DRAWING 4 3 2 VICOR SWD A IND BASKET OUTPUT ASSY DWG SIZE CAGE CODE D 67131 SCALE 10:1 DWG NO REV 43693 SHEET 1 OF 1 1 1