32180

8 7 6 5 4 3 2 1 REVISIONS VICOR CONFIDENTIAL THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF VICOR CORP. REV F DESCRIPTION DATE APPROVED 1 RELEASED PER E054246 PEI 1/3/06 ECF 2 REVISED PER E100888A KUK 7/9/10 DCS F 4.390 R.031 TYP. .454±.015 SEE NOTE 4 93° E E .045±.006 (18) PL .312 .630±.010 .180±.007 TYP. .050±.015 FULL RAD. 17 SPACES EQ. DIS. =( 3.06) -A0.005 D D .684 SEE NOTE 3 & 5 3.622±.010 3.622 3.228 C C .188 (4) PL .197±.010 .197±.010 B A 3.996 B 4.390±.034 NOTES: 1. MATERIAL: ALUMINUM 6063-T5 2. REMOVE ALL BURRS AND SHARP EDGES. 3. CLEAR FINISH, RoHS COMPLIANT, CHROMIUM FREE PER CST-001 LATEST REVISION. 4. TOLERANCE ON DIMENSION INDICATED TO ALLOW FOR CROWN OF RAW STOCK. 5. NO MACHINING MISMATCH PERMITTED THIS SURFACE. 6. NOTES 3 AND 5 ARE CRITICAL CHARACTERISTIC FOR LOT INSPECTION. 7. VICOR WORKMANSHIP SPECIFICATIONS WS-0003 AND WS-0007 APPLY TO THE FABRICATION OF THIS ITEM. 8. DIMENSIONS ARE INCHES ONLY. 8 7 6 DRAWN P.E.IENI MATERIAL FINISH DATE 12/08/05 4 3 F/A HS CFG "G" & "H" XFLOW ARRAY (VIPAC) UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE INCH [MM] TOLERANCES ARE: DECIMALS ANGLES X.XX [X.X] = ±0.01 [0.25] ±1° X.XXX [X.XX] = ±0.005 [0.127] THIRD ANGLE PROJECTION DO NOT SCALE DRAWING 5 SWD VICOR SIZE CAGE CODE C 67131 SCALE 2 : 1 2 DWG NO A REV 32180 2 SHEET 1 OF 1 1