43807-05

8 7 6 5 4 3 VICOR CONFIDENTIAL REV. THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF VICOR CORP. F 1 DIM 'A' 2 1 DESCRIPTION RELEASE PER E161031b INTL DATE APVD GCK 11/22/16 RH F DIM 'B' .90 22.86 1.40 35.56 1.171 29.750 E R.188 4.763 TYP D .11 2.91 .152 3.861 THRU TYP .075 1.905 E .12 2.93 D .002 [.025] PER 1.000 [25.400] .010 .254 MAX DP TYP C .075 1.905 DIM 'C' B A C NOTES: BOM NUMBER PRODUCT DIM 'A' DIM 'B' DIM 'C' 43807-01 2214 (0 STAGE) 2223 0.57 [14.55] N/A 1.23 [31.16] 43807-02 2814 (1 STAGE) 2223 0.95 [24.22] N/A 1.60 [40.69] 43807-03 2814 (0 STAGE) 3623 0.57 [14.55] 0.789 [20.033] 1.77 [45.04] 43807-04 3414 (1 STAGE) 3623 0.98 [25.00] 0.789 [20.033] 2.18 [55.25] 43807-05 3714 (1 STAGE) 4623 0.98 [25.00] 1.150 [29.200] 2.55 [64.65] 43807-06 3814 (0 STAGE) 2361 0.39 [10.03] 1.277 [32.430] 2.56 [65.11] 43807-07 3814 (0 STAGE) 2361 NBM 0.39 [10.03] 1.277 [32.430] 2.56 [65.11] 43807-08 4414 (1 STAGE) 2361 0.98 [25.00] 1.277 [32.430] 3.15 [80.07] 43807-09 4414 (1 STAGE) 6123 0.98 [25.00] 1.757 [44.625] 3.15 [80.07] 43807-10 4914 (2 STAGE) 6123 1.38 [34.95] 1.757 [44.625] 3.54 [89.88] 43807-11 5314 (0 STAGE) 2392 0.54 [13.84] 2.490 [63.250] 3.93 [99.77] 43807-12 5314 (0 STAGE) 9223 0.54 [13.84] 2.970 [75.445] 3.93 [99.77] DRAWN BY DATE 43807-13 5614 (1 STAGE) 2392 0.98 [25.00] 2.490 [63.250] 4.24 [107.57] Matthew Biron 2/24/2016 43807-14 5614 (1 STAGE) 9223 0.98 [25.00] 2.970 [75.445] 4.24 [107.57] 43807-15 6114 (2 STAGE) 9223 1.38 [34.97] 2.970 [75.445] 4.85 [123.30] 1. CLEAR FINISH, RoHS COMPLIANT PER CST-0001, LATEST REVISION PER A.) CHROMIUM FREE, OR B.) TRIVALENT CHROMIUM IN ACCORDANCE WITH MIL-DTL-5541, TYPE II, CLASS 1A OR 3. SEE CST-0003 FOR TYPES OF AVAILABLE FINISHES. 2. SEE CHART FOR BOM NUMBERS SEE BOMS FOR PARTS LIST. 3. MATERIAL: MAKE FROM AAVID EXTRUSION P/N 74765 OR EQUIVALENT (VICOR P/N 42596) 4. REMOVE ALL BURRS AND SHARP EDGES. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE : INCH / [MM] TOLERANCES ARE: DECIMALS ANGLES X.XX [X.XX] = ±0.01 [0.25] ±1° X.XXX [X.XXX] = ±0.005 [0.127] THIRD ANGLE PROJECTION DO NOT SCALE DRAWING 8 7 6 5 B 4 3 VICOR SWD DWG HEAT SINK LF .900 TALL ADAPTERS SIZE C CAGE CODE SCALE 2:1 2 67131 DWG NO REV 43755 1 SHEET 1 OF 1 1 A