49390-221

8 7 6 5 4 3 VICOR CONFIDENTIAL REV. THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF VICOR CORP. F 2 1 1 DESCRIPTION RELEASE PER E200376 INTL DATE APVD DKT 07/28/20 VD F READABLE MARKING 1 2.403 .095 SEE NOTE 6 SEE NOTE 4 (4) PL. 1 WHITE INK DOT 3 2 (4) PL. 18.161±.38 .715±.015 SEE NOTE 6 E 6 15.189±.203 .598±.008 SEE NOTE 5 (2) PL. A/R 2 E 49390-221 4 3 6.629 .261 REF SEATING PLANE VICOR P/N B 12.268±.076 .483±.003 3.50 .14 MIN PIN PROTRUSION REF SEATING PLANE (4) PL. 49390-221 IND @ 10KHz 50mV 220µH ±25% Z @ 1MHz 50mV 700 Ω MIN DCR MAX PER WINDING 1 RATED I 11 mΩ 2 D 4 2.794±.076 .110±.003 ANNULAR RING (4) PL. 39° (4) PL. 1.266 .050 (4) PL. 10.5 A 11 TURNS 25 AWG SINGLE BUILD C B 3 2.032±.076 .080±.003 PTH (4) PL. DRAWN BY DATE James Bourque 7/17/2018 6 5 VICOR UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE MM /[INCH] THIRD ANGLE PROJECTION 4 3 SWD TH INDUCTOR BIFILAR COMMON MODE ADAPTER TOLERANCES ARE: DECIMALS ANGLES X.XX [X.XX] = ±0.25 [0.01] ±1° X.XXX [X.XXX] = ±0.127 [0.005] DO NOT SCALE DRAWING 7 3 7.595±.076 .299±.003 NOTES: 6.134±.076 1- SEE BOM 49390-221 FOR LIST OF PARTS. 2- WIRE TO BE SINGLE BUILD, UL R/C (OBMW2) MW77C, CLASS H, 180° C. .242±.003 3- WIND SINGLE LAYER. NO BACK TRACKING ALLOWED. 4- STRIP AND SOLDER WIRES TO TERMINAL WITH Sn95/Sb5 SOLDER. 5- DISPENSE EPOXY (ITEM 4) APPROX WHERE SHOWN, ENSURE THE WIRE AND PINS ARE SECURED TO THE HEADER WITH EPOXY. MEASURE PIN POSITION WHERE PIN COMES THROUGH PLASTIC FLANGE, NOT AT PIN TIP. 6- SOLDER, WIRES AND EPOXY SHALL NOT VIOLATE OVERALL DIMENSIONS SHOWN. 7- WINDINGS SHALL NOT VIOLATE DIMENSION SHOWN. 8- DENOTES CRITICAL CHARACTERISTIC FOR LOT INSPECTION. 9- RoHS COMPLIANT. LEAD FREE PER CST-0001, LATEST REVISION. 8 2 15.189±.076 .598±.003 4 A 1 12.268±.203 .483±.008 SEE NOTE 5 (2) PL. .127/[.005] SEATING PLANE C 4.227 .166 SEE NOTE 7 SEE NOTES 5 & 6 (4) PL. 16.256 .640 SEE NOTE 6 D 11 TURNS 25 AWG SINGLE BUILD 4 SIZE CAGE CODE C 67131 SCALE 4:1 2 DWG NO A REV 49389 1 SHEET 1 OF 1 1