V375C54M600B

45 Features • • • • • • • • • • • 375Vin / 54Vout / 600Watts DC-DC Converter Module Model Number V375A54C600B* DC input range: 250 - 425V Input surge withstand: 500V for 100ms DC output: 54V Programmable output: 10 to 110% Regulation: ±0.2% no load to full load Efficiency: 89.6% Maximum operating temperature: 100°C at full load Power density: 120W/cubic inch Height above board: 0.43 in. (10,9 mm) Parallelable, with N+M fault tolerance Low noise ZCS/ZVS architecture Shown actual size: 4.6 x 2.2 x 0.5 in 117 x 56 x 12,7 mm Typical Applications: distributed power; off-line systems using PFC front-ends; electric vehicles, battery chargers. Product Overview This DC-DC converter module uses 2nd Generation power processing, control and packaging technologies to provide the performance, flexibility and cost effectiveness expected of a mature power component. For example, a plated-cavity core transformer couples widely separated primary and secondary windings, resulting in low in-toout parasitic capacitance and noise. High frequency ZCS/ZVS switching, advanced power semiconductor packaging and thermal management provide high power density with low temperature gradients. Extensive use of silicon integration results in 1/3 the part count of a 1st Generation converter. Absolute Maximum Ratings Parameter +In to –In voltage +In to –In voltage PC to –In voltage PR to –In voltage +Out to –Out voltage +Sense to –Out voltage –Sense to –Out voltage SC to –Out voltage Isolation voltage (in to out) Isolation voltage (in to base) Isolation voltage (out to base) Storage temperature (C–Grade) Operating temperature (C– Grade) Pin soldering temperature Pin soldering temperature Mounting torque Rating -0.5 to +425 500 -0.5 to +7.0 -0.5 to +7.0 -0.5 to +70.7 -0.5 to +70.7 1.0 -0.5 to +1.5 3000 1550 500 -40 to +125 -20 to +100 500 (260) 750 (390) 5 (0.57) Unit Vdc Vdc Vdc Vdc Vdc Vdc Vdc Vdc Vrms Vrms Vrms °C °C °F (°C) °F (°C) in-lbs (N-m) See part numbering chart on this page for other product grades. Notes