VI-J6MIM

12 1-800-735-6200 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Features s s s s s s s s s s Up to 50W/Cubic Inch UL, CSA, TÜV, VDE, BABT CE Marked Up to 90% Efficiency Size: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7) Remote Sense and Current Limit Logic Disable Wide Range Output Adjust ZCS Power Architecture Low Noise FM Control Nominal 0= 1= W= 2= 3= N= 4= T= 5= 6= 7= Rev 3 1 of 2 Converter Selection Chart VI-J Input Voltage Range Brownout / Transient* 22V 36V n/a 60V 72V n/a 110V n/a 215V 425V n/a 12V 10 - 20V(5) n/a 24V 21 - 32V(2) 18V 24V 18 - 36V(2) n/a 36V 21 - 56V(6) 18V 48V 42 - 60V(3) 36V 48V 36 - 76V(2) n/a 72V 55 - 100V(2) 45V 110V 66 - 160V(2) n/a 150V 100 - 200V(2) 85V 300V 200 - 400V(3) 170V 150/300V 100 - 375V(6) 90V Output Voltage Z= 2V Y = 3.3V 0= 5V X = 5.2V W = 5.5V V = 5.8V T = 6.5V R = 7.5V M = 10V 1 = 12V P = 13.8V 2 N 3 L J K 4 H F D B = 15V = 18.5V = 24V = 28V = 36V = 40V = 48V = 52V = 72V = 85V = 95V Product Highlights The VI-J00 MiniMod family establishes a new standard in component-level DC-DC converters. This “junior” size complement to the higher power VI-200 family offers up to 100W of isolated and regulated power in a board mounted package. At one-half the size and twice the power density of previous 100W modules, and with a maximum operating temperature rating of 100˚C, the MiniMod opens new horizons for board-mounted (distributed) power architectures. Utilizing Vicor’s “zero-currentswitching” forward converter technology, proven by an installed base of over 8 million units, the MiniMod family combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems. Product Grade/ Operating Temp. E= C= I= M= -10°C -25°C -40°C -55°C to to to to +100°C +100°C +100°C +100°C Product Grade/ Storage Temp. E C I M = = = = -20°C -40°C -55°C -65°C to +105°C to +105°C to +105°C to +105°C Output Power/Current VOUT ≥ 5V Z = 25W Y = 50W X = 75W W = 100W Z Y X W VOUT < 5V = 5A = 10A = 15A = 20A Max. Output For 5V Outputs > 5V Outputs < 5V Outputs (1) 50W 50W 10A (2) 75W 100W 20A (3) 100W 100W 20A *Brownout 75% of rated load; transient voltage for 1 second. Max. Output For 5V Outputs > 5V Outputs < 5V Outputs (4) 75W 75W 15A (5) 50W 75W 15A (6) 50W 75W 10A Mechanical Drawing .49 (12,4) .30±.015 (7,6)±(0,38) .65 (16,5) 2.28 (57,9) 1.30 (33,0) .080 Dia (2) places Solder plate over copper alloy Pin # 1 4 3 2.10 (53,4) 2 9 8 2 3 1.40 1.00 (35,6) .70 (25,4) .40 (17,8) (10,2) .35± .015 (8,9)±(0,38) 4 5 6 7 8 9 .15 (3,8) FULL R .15 (3,8) .040 (1,0) Dia (7) places Solder plate over copper alloy Product ID this surface .22 (5,6) Min. .30 (7,6) Min. Function +In Gate In Gate Out -In +Out +Sense Trim –Sense –Out VI-J00 7 6 5 Packaging Options SlimMods™, high power density, flangeless packages and FinMods™, featuring integral finned heatsinks. SlimMod: Option suffix: - S Example: VI - JXX - XX - S FinMod: Option suffix: - F1 and - F2 Examples: VI - JXX - XX -F1, 0.75" height VI - JXX - XX -F2, 1.00" height .12 (3,0) 1 2.40 (61,0) 1.75 (44,4) Max. 1.90 (48,3) .50 (12,7) +.030 (0,76) -.000 (0) .01 Aluminum Base For the latest Vicor Product Information: www.vicorpower.com 12 1-800-735-6200 Converter Specifications (typical at TBP = 25°C, nominal line and 75% load, unless otherwise specified) VI-J00 E-Grade PARAMETER s Input Characteristics Inrush charge Input reflected ripple current – pp Input ripple rejection Rev 3 2 of 2 VI-J00 C-, I-, M-Grade MIN. TYP. MAX. UNITS TEST CONDITIONS MIN. TYP. MAX. 60x10 -6 10% 25+20Log 60x10 -6 10% 100x10-6 Coulombs IIN dB dB Nominal line Nominal line, full load 120 Hz, nominal line 2400 Hz, nominal line () Vin Vout 2 30+20Log Vin Vout 20+20Log Vin Vout 1.35 () () 2 1.0% 0.2% 0.5% 0.02 No load power dissipation s Output Characteristics Setpoint accuracy Load/line regulation Load/line regulation Output temperature drift Long term drift Output ripple - pp: 2V, 3.3V 5V 10-48V Trim range1 Total remote sense compensation Current limit Short circuit current s Control Pin Characteristics Gate out impedance Gate in impedance Gate in high threshold Gate in low threshold Gate in low current s Dielectric Withstand Characteristics Input to output Output to baseplate Input to baseplate s Thermal Characteristics Efficiency Baseplate to sink s Mechanical Specifications Weight 110V, 1.35 Watts 1.0% 2.0% 0.5% 1.0% 0.5% 0.05% 0.2% 0.01 0.02 100 2% 0.75% VNOM VNOM VNOM %/°C %/1K hours mV LL to HL, 10% to Full Load LL to HL, No Load to 10% Over rated temperature 0.02 0.02 200 5% 3% 50% 0.5 105% 105% 110% 135% 140% 50% 0.5 105% 105% 150 3% 1.5% 110% 125% 130% 20 MHz bandwidth 20 MHz bandwidth 20 MHz bandwidth 0.25V max. neg. leg Automatic restart VNOM Volts INOM INOM 50 10 3 6 0.65 6 0.65 50 10 3 6 6 Ohms Ohms Volts Volts mA Use open collector 3,000 500 1,500 3,000 500 1,500 VRMS VRMS VRMS Baseplate earthed 78-88% 0.4 80-90% 0.4 °C/Watt With Vicor P/N 04308 3.0 (85) 3.0 (85) Ounces (Grams) 12V and 15V outputs, standard trim range ±10%. Consult factory for wider trim range. For product compliance with agency standards please refer to pages 67 - 69. For the latest Vicor Product Information: www.vicorpower.com 73