03M2001SPA3

M, C, T Vishay Dale NTC Thermistors,Coated FEATURES • Small size - conformally coated. • Wide resistance range. • Available in 11 different R-T curves. DESCRIPTION Models M, C, and T are conformally coated, leaded thermistors for standard PC board mounting or assembly in probes. The coating is baked-on phenolic for durability and long-term stability. Models M and C have tinned solid copper leads. Model T has solid nickel wires with Teflon® insulation to provide isolation when assembled in metal probes or housings. DIMENSIONS in inches [millimeters] TINNED COPPER WIRE BODY DIA. MAX. TEFLON INSULATED NICKEL WIRE 1/4 NOM. BODY DIA. MAX. 1.5 [36.1] MIN. CLEAN LEAD LENGTH 3 ± 0.25 [76.2 ± 6.4] LD DIAMETER Type M Type C Type T WIRE SIZE AWG 30: 0.0100 [0.254] AWG 28: 0.0126 [0.320] AWG 30: 0.0100 [0.254] GLOBAL PART NUMBER INFORMATION New Global Part Numbering: 01C2001FP (preferred part numbering format) 0 CURVE 01 02 03 04 07 08 09 12 13 14 17 1 C 2 0 0 1 F P POINT MATCH TOLERANCE F = ± 1% J = ± 5% K = ± 10% PACKAGING F = Lead Free, Bulk P = Tin/Lead, Bulk GLOBAL MODEL C M T RESISTANCE VALUE 2001 = 2K Historical Part Number example: 1C2001FP (will continue to be accepted) 01 HISTORICAL CURVE C GLOBAL MODEL 2001 RESISTANCE VALUE F TOLERANCE CODE P PACKAGING New Global Part Numbering: 01C2001SPC3 (preferred part numbering format) 0 CURVE 01 02 03 04 07 08 09 12 13 14 17 1 C 2 0 0 1 S P C 3 PACKAGING F = Lead Free, Bulk P = Tin/Lead, Bulk CURVE TRACK TOLERANCE* A3 B3 C3 A2 B2 C2 A4 B4 A5 B5 C5 A8 B8 C8 GLOBAL MODEL C M T RESISTANCE VALUE 2001 = 2K CHARACTERISTICS S *See following pages for Tolerance explanations and details. Historical Part Number example: 1C2001SPC3 (will continue to be accepted) 1 HISTORICAL CURVE C GLOBAL MODEL 2001 RESISTANCE VALUE S CHARACTERISTIC P C3 PACKAGING CURVE TRACK TOLERANCE www.vishay.com 18 For technical questions, contact thermistor1@vishay.com Document Number: 33003 Revision 22-Sep-04 M, C, T NTC Thermistors, Coated SELECTION GUIDE FOR TYPE M, C, AND T THERMISTORS R25 (Ohms) 27 33 50 56 68 82 100 120 150 180 220 270 330 390 470 500 560 680 820 1K 1.2K 1.5K 1.8K 2.2K 2.7K 3.3K 3.9K 4.7K 5K 5.6K 6.8K 8.2K 10K 12K 15K 18K 22K 27K 33K 39K 47K 50K 56K 68K 82K 100K 120K 150K 180K 220K 270K 330K 390K 470K 500K 560K 680K 820K 1 Meg Document Number: 33003 Revision 22-Sep-04 CURVE NUMBER 1 2 3 4 7 8 9 12 14 17 MAXIMUM BODY DIAMETER 0.125 [3.2] 0.110 [2.8] 0.095 [2.4] Vishay Dale DISSIPATION CONSTANT 2 - 3 mWatts/°C THERMAL TIME CONSTANT 6 - 14 Seconds NOTE: 1. Intermediate resistance values between the standard value series are available. Size would be the same as the color grouping. 2. Other body diameters available. Bead diameter increases as Res. decreases. (Consult Factory) 3. Leaded series of thermistors includes additional styles: (Consult Factory) Type B: Type F: Type E: Type D: Type G: Type H: 26AWG lead, .0159 [.40] 32AWG lead, .008 [ .20] 24AWG lead, .020 [ .51] 22AWG lead, .025 [.64] 20AWG lead, .032 [ .81] 18AWG lead, .040 [1.02] For technical questions, contact thermistor1@vishay.com www.vishay.com 19 M, C, T Vishay Dale NTC Thermistors, Coated TOLERANCES AVAILABLE FOR TYPE M, C AND T THERMISTORS Description of Thermistor Tolerances The many applications of thermistors have mandated the need for two basic tolerance schemes for these products - Curve Tracking and Point Match Thermistors. An example of the resistance tolerance at various temperatures for the two different tolerancing methods is described in the following graph: 10 9 8 ± 5% POINT MATCH CURVE TOLERANCE (± %) 7 6 5 4 3 2 1 0 A5 A2 A8 A3 A4 25°C ± 1°C CURVE TRACK CURVE - 50 - 40 - 30 - 20 - 10 10 20 30 40 50 60 70 80 90 100 110 120 130 140 TEMPERATURE (°C) Curve Tracking Tolerance: Thermistors are calibrated at the high temperature of the curve track range and then final tested at the low temperature of the curve track range. This ensures that the thermistor will meet the specified temperature accuracy at every temperature within the desired temperature range. Several temperature ranges are available and the accuracy of the thermistor may be ± 0.2°C, ± 0.5°C, and ± 1.0°C. The Curve Tracking temperature ranges and their code designators are shown in Figure 1 and Table 1. To specify, add the appropriate suffix from the following table to the part number. Example: 1M1002-B3 = Curve 1, 10 kilohms at + 25°C, curve tracking to ± 0.5°C from 0°C to + 70°C STANDARD ELECTRICAL SPECIFICATIONS FOR CURVE TRACKING THERMISTORS TEMP. RANGE TOLERANCE PART NO. SUFFIX C U R V E 1 2 4 8 9 0°C to + 70°C - 20°C to + 50°C 0°C to + 100°C 25°C to + 90°C 0°C to + 50°C ± 1°C ± 0.5°C ± 0.2°C - A3 X X X X X - B3 X X X X X - C3 X X X X X ± 1°C ± 0.5°C ± 0.2°C - A2 X X X X X - B2 X X X X X - C2 X X X X X ± 1°C ± 0.5°C ± 0.2°C - A4 X X X X X - B4 X X X X X - C4 N/A N/A N/A N/A N/A ± 1°C ± 0.5°C ± 0.2°C ± 1°C ± 0.5°C ± 0.2°C - A5 X X X X X - B5 X X X X X - C5 X X X X X - A8 X X X X X - B8 X X X X X - C8 X X X X X www.vishay.com 20 For technical questions, contact thermistor1@vishay.com 150 0 Document Number: 33003 Revision 22-Sep-04 M, C, T NTC Thermistors, Coated POINT MATCH TOLERANCE The standard leaded thermistors are calibrated and tested at 25°C to a tolerance of ± 5% or ± 10%; however, tighter tolerance, point matched thermistors are readily available as are special point match temperatures to fit your application. Since these thermistors have only one controlled point of reference ( the point match temperature ), the resistance at other temperatures is given by the "Resistance VS Temperature Conversion Tables" for the appropriate material curve. The resistance value at any temperature is the ratio factor times the resistance at 25°C. Example: 1M1002-5, +70°C resistance = (Resistance factor for curve 1 at 70°C is .1990) X (10000 ohm resistance at 25°C) = 1990 ohms. The tolerance of the resistance at any temperature is described by Figure 2. Vishay Dale FIGURE 2 POINT MATCH TOLERANCES VS. TEMPERATURE MAX. R VS. T MIN. R VS. T Point match resistance tolerances at temperatures other than 25ºC are not the same as the calibration temperature. This difference is presented in Figure 2. The tolerance at any given temperature is the point match tolerance + the MT ±% (Manufacturing Tolerance). The MT ±% may be obtained from the R vs. T Conversion tables and is added to the point match temperature, i.e., ± 1% Tol. at 25ºC + ± 2.6% at -30ºC for Curve 1 equals a total tolerance of ± 3.6% at -30ºC. RESISTANCE NOMINAL R VS. T PIVOT POINT (CALIBRATION TEMPERATURE) 25°C TEMPERATURE COMPUTER AIDS FOR THERMISTOR SELECTION A spreadsheet is available for the Vishay Thermistor Materials that calculates Beta, Steinhart-Hart Equation Constants A, B, and C, the resistance at any temperature based upon the Steinhart constants or Beta, the temperature equivalent of the resistance reading, and resistance temperature coefficients. This spread sheet will also calculate the total resistance tolerance of any point matched thermistor for temperatures in 10ºC increments, and the resistance tolerance at any temperature within the calibrated range of curve tracking thermistors. Please contact factory if interested in this Excel™ spreadsheet. Document Number: 33003 Revision 22-Sep-04 For technical questions, contact thermistor1@vishay.com www.vishay.com 21