100BGQ045

100BGQ045 Vishay High Power Products Schottky Rectifier, 100 A FEATURES • • • • • 150 °C TJ operation High frequency operation Ultralow forward voltage drop RoHS COMPLIANT Continuous high current operation Guard ring for enhanced ruggedness and long term reliability • PowerTabTM package • Lead (Pb)-free plating Cathode Anode PowerTabTM DESCRIPTION PRODUCT SUMMARY IF(AV) VF at 100 A at 25 °C IR at 125 °C VR 100 A 0.77 V 320 mA 45 V The 100BGQ045 Schottky rectifier has been optimized for ultralow forward voltage drop specifically for low voltage output in high current AC/DC power supplies. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, reverse battery protection, and redundant power subsystems. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 µs sine 100 Apk (typical) TJ Range CHARACTERISTICS Rectangular waveform TC VALUES 100 97 45 4400 0.65 150 - 55 to 150 UNITS A °C V A V °C °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM 100BGQ045 45 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current Maximum peak one cycle non-repetitive surge current Non-repetitive avalanche energy Repetitive avalanche current SYMBOL IF(AV) IFSM 10 ms sine or 6 ms rect. pulse EAS IAR TJ = 25 °C, IAS = 6 A, L = 2 mH Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical TEST CONDITIONS 50 % duty cycle at TC = 97 °C, rectangular waveform 5 µs sine or 3 µs rect. pulse Following any rated load condition and with rated VRRM applied VALUES 100 4400 A 830 40 6 mJ A UNITS A Document Number: 94580 Revision: 30-Oct-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 100BGQ045 Vishay High Power Products Schottky Rectifier, 100 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 50 A Forward voltage drop VFM (1) 100 A 50 A 100 A TJ = 150 °C, VR = 45 V Reverse leakage current IRM (1) TJ = 25 °C TJ = 125 °C Maximum junction capacitance Typical series inductance Maximum voltage rate of change Note (1) Pulse width < 300 µs, duty cycle < 2 % CT LS dV/dt VR = Rated VR TEST CONDITIONS TJ = 25 °C TYP. 0.54 0.69 0.48 0.65 600 0.3 180 2700 3.5 10 000 MAX. 0.58 0.77 0.52 0.71 1000 1 320 pF nH V/µs mA V UNITS TJ = 150 °C VR = 5 VDC, (test signal range 100 kHz to 1 MHz) 25 °C Measured from tab to mounting plane Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case Typical thermal resistance, case to heatsink Approximate weight minimum maximum Case style PowerTabTM SYMBOL TJ, TStg RthJC RthCS DC operation Mounting surface, smooth and greased TEST CONDITIONS VALUES - 55 to 150 0.50 °C/W 0.30 5 0.18 1.2 (10) 2.4 (20) g oz. N·m (lbf · in) UNITS °C Mounting torque Marking device 100BGQ045 www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 94580 Revision: 30-Oct-08 100BGQ045 Schottky Rectifier, 100 A Vishay High Power Products 1000 Reverse Current - IR (mA) 1000 150°C 100 125°C 100°C 10 75°C 50°C 25°C 0.1 Tj = 150°C 1 Instantaneous Forward Current - IF (A) 100 0.01 0 5 10 15 20 25 30 35 40 45 Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 10000 10 T (pF ) Junction Ca pacita nc e - C T = 25°C J 1000 Tj = 125°C Tj = 25°C 1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1. 8 Forward Voltage Drop - VFM (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics 100 0 10 20 30 40 50 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 1 Thermal Impedance ZthJC (°C/W) D = 0.75 D = 0.5 D = 0.33 D = 0.25 0.1 D = 0.2 Single Pulse (Thermal Resistance) 0.01 1E-05 1E-04 1E-03 1E-02 1E-01 1E+00 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94580 Revision: 30-Oct-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 100BGQ045 Vishay High Power Products Schottky Rectifier, 100 A 180 Allowable Case Temperature (°C) 120 160 140 120 100 80 60 0 20 40 60 80 100 120 140 160 Average Forward Current - IF(AV)(A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current 10000 Non-R epetitive S urge Current - I FS (A) M Average Power Loss - (Watts) 100 80 60 40 20 0 0 DC 180° 120° 90° 60° 30° RMS Limit DC Square wave (D=0.50) 80% rated Vr applied see note (1) 30 60 90 120 150 Average Forward Current - IF(AV) (A) Fig. 6 - Forward Power Loss Characteristics 1000 At Any Rated Load Condition And With Rated VRRM Applied Following S urge 100 10 100 1000 10000 S quare Wave Pulse Duration - t p (microsec) Fig. 7 - Maximum Non-Repetitive Surge Current L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Ω Current monitor Fig. 8 - Unclamped Inductive Test Circuit (1) Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR For technical questions, contact: diodes-tech@vishay.com Document Number: 94580 Revision: 30-Oct-08 www.vishay.com 4 100BGQ045 Schottky Rectifier, 100 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 100 BGQ 045 1 1 2 3 - 2 3 Current rating Essential part number Voltage code = VRRM LINKS TO RELATED DOCUMENTS Dimensions Part marking information http://www.vishay.com/doc?95240 http://www.vishay.com/doc?95370 Document Number: 94580 Revision: 30-Oct-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1