100BGQ100_11

VS-100BGQ100 www.vishay.com Vishay Semiconductors Schottky Rectifier, 100 A FEATURES • • • • • 175 °C max. operating junction temperature High frequency operation Low forward voltage drop Continuous high current operation Guard ring for enhanced ruggedness and long term reliability Cathode Anode PowerTab® • Screw mounting only • Designed and qualified according to JEDEC-JESD47 • PowerTab® package PowerTab® 100 A 100 V 0.82 V 180 mA at 125 °C 175 °C Single die 9 mJ PRODUCT SUMMARY Package IF(AV) VR VF at IF IRM TJ max. Diode variation EAS • Compliant to RoHS Directive 2002/95/EC DESCRIPTION The VS-100BGQ100 Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 °C junction temperature. Typical applications are in switching power supplies, converters, reverse battery protection, and redundant power subsystems. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 μs sine 100 Apk (typical) TJ Range CHARACTERISTICS Rectangular waveform TC VALUES 100 124 100 6300 0.77 125 - 55 to 175 UNITS A °C V A V °C °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM 100BGQ100 100 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current Maximum peak one cycle non-repetitive surge current Non-repetitive avalanche energy Repetitive avalanche current SYMBOL IF(AV) IFSM 10 ms sine or 6 ms rect. pulse EAS IAR TJ = 25 °C, IAS = 2 A, L = 4.5 mH Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical TEST CONDITIONS 50 % duty cycle at TC = 124 °C, rectangular waveform 5 μs sine or 3 μs rect. pulse Following any rated load condition and with rated VRRM applied VALUES 100 6300 A 800 9 2 mJ A UNITS A Revision: 17-Jun-11 Document Number: 94581 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-100BGQ100 www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 50 A Forward voltage drop VFM (1) 100 A 50 A 100 A Reverse leakage current Maximum junction capacitance Typical series inductance Maximum voltage rate of change Note (1) Pulse width < 300 μs, duty cycle < 2 % IRM (1) CT LS dV/dt TJ = 25 °C TJ = 125 °C TEST CONDITIONS VALUES TYP. 0.83 1.01 0.66 0.77 22 14 1320 3.5 10 000 MAX. 0.86 1.08 0.7 0.82 300 18 μA mA pF nH V/μs V UNITS TJ = 25 °C TJ = 125 °C VR = Rated VR VR = 5 VDC, (test signal range 100 kHz to 1 MHz) 25 °C Measured from tab to mounting plane Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case Typical thermal resistance, case to heatsink Approximate weight minimum maximum Case style PowerTab® SYMBOL TJ, TStg RthJC RthCS DC operation Mounting surface, smooth and greased TEST CONDITIONS VALUES - 55 to 175 0.50 °C/W 0.30 5 0.18 1.2 (10) 2.4 (20) g oz. N·m (lbf · in) UNITS °C Mounting torque Marking device 100BGQ100 Revision: 17-Jun-11 Document Number: 94581 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-100BGQ100 www.vishay.com Vishay Semiconductors 1000 100 175°C 150°C 10 1 0.1 50°C 0.01 25°C 0.001 0.0001 0 20 40 60 80 100 125°C 100°C 75°C 1000 Reverse Current - IR (mA) Tj = 175°C Instantaneous Forward Current - IF (A) 100 Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 10000 10 T (pF) Junc tion Capac itance - C T = 25°C J Tj = 125°C Tj = 25°C 1000 1 0.0 0.5 1.0 1.5 2.0 Forward Voltage Drop - VFM (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics 100 0 20 40 60 80 100 Reverse Voltage - V (V) R Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 1 Thermal Impedance ZthJC (°C/W) D = 0.75 D = 0.5 D = 0.33 D = 0.25 0.1 D = 0.2 Single Pulse (Thermal Resistance) 0.01 1E-05 1E-04 1E-03 1E-02 1E-01 1E+00 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Revision: 17-Jun-11 Document Number: 94581 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-100BGQ100 www.vishay.com Vishay Semiconductors 120 180 Allowable Case Temperature (°C) 160 140 120 100 80 60 0 20 40 60 80 100 120 140 160 Average Forward Current - IF(AV)(A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Average Power Loss - (Watts) 100 80 60 40 20 0 0 DC 180° 120° 90° 60° 30° RMS Limit DC Square wave (D=0.50) 80% rated Vr applied see note (1) 30 60 90 120 150 Average Forward Current - IF(AV) (A) Fig. 6 - Forward Power Loss Characteristics 10000 FS M Non-Repetitive S urge Current - I (A) 1000 At Any Rated Load Condition And With Rated VRRM Applied Following S urge 100 10 100 1000 10000 S quare Wave Pulse Duration - t p (microsec) Fig. 7 - Maximum Non-Repetitive Surge Current L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Ω Current monitor Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR Revision: 17-Jun-11 Document Number: 94581 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-100BGQ100 www.vishay.com ORDERING INFORMATION TABLE Device code Vishay Semiconductors VS1 1 2 3 4 - 100 BGQ 100 2 3 4 Vishay Semiconductors product Current rating Essential part number Voltage code = VRRM LINKS TO RELATED DOCUMENTS Dimensions Part marking information Application note www.vishay.com/doc?95240 www.vishay.com/doc?95370 www.vishay.com/doc?95179 Revision: 17-Jun-11 Document Number: 94581 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors PowerTab® DIMENSIONS in millimeters (inches) 15.90 (0.62) 15.60 (0.61) 15.60 (0.61) 14.80 (0.58) 1.35 (0.05) 1.20 (0.04) 8.45 (0.33) 8.20 (0.32) 4.20 (0.16) 4.00 (0.15) Lead 1 12.40 (0.48) 12.10 (0.47) 18.25 (0.71) 18.00 (0.70) 27.65 (1.08) 27.25 (1.07) Ø 4.20 (Ø 0.16) Ø 4.00 (Ø 0.15) Lead 2 Ø 4.20 (Ø 0.16) Ø 4.00 (Ø 0.15) 5.45 REF. (0.21 REF.) 5.20 (0.20) 4.95 (0.19) 3.09 (0.12) 3.00 (0.11) 0.60 (0.02) 0.40 (0.01) 1.30 (0.05) 1.10 (0.04) 12.20 (0.48) 12.00 (0.47) 4.95 (0.19) 4.75 (0.18) Lead assignments Lead 1 = Cathode Lead 2 = Anode Revision: 03-Aug-11 Document Number: 95240 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 39.8 (1.56) 39.6 (1.55) Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1