10BQ060PBF_10

VS-10BQ060PbF Vishay High Power Products Schottky Rectifier, 1.0 A FEATURES • Small foot print, surface mountable • Low forward voltage drop • High frequency operation Cathode Anode • Guard ring for enhanced ruggedness and long term reliability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Compliant to RoHS directive 2002/95/EC • Designed and qualified for industrial level SMB PRODUCT SUMMARY IF(AV) VR 1.0 A 60 V DESCRIPTION The VS-10BQ060PbF surface mount Schottky rectifier has been designed for applications requiring low forward drop and very small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 μs sine 1.0 Apk, TJ = 125 °C Range CHARACTERISTICS Rectangular waveform VALUES 1.0 60 700 0.57 - 55 to 150 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM VS-10BQ060PbF 60 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current Maximum peak one cycle non-repetitive surge current Non-repetitive avalanche energy Repetitive avalanche current SYMBOL IF(AV) IFSM 10 ms sine or 6 ms rect. pulse EAS IAR TJ = 25 °C, IAS = 1 A, L = 4 mH Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical TEST CONDITIONS 50 % duty cycle at TL = 103 °C, rectangular waveform 5 μs sine or 3 μs rect. pulse Following any rated load condition and with rated VRRM applied VALUES 1.0 700 A 42 2.0 1.0 mJ A UNITS A Document Number: 94113 Revision: 03-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 1 VS-10BQ060PbF Vishay High Power Products Schottky Rectifier, 1.0 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 1A Maximum forward voltage drop See fig. 1 VFM (1) 2A 1A 2A Maximum reverse leakage current See fig. 2 Typical junction capacitance Typical series inductance Maximum voltage rate of charge Note (1) Pulse width < 300 μs, duty cycle < 2 % IRM (1) CT LS dV/dt TJ = 25 °C TJ = 125 °C TEST CONDITIONS TJ = 25 °C TJ = 125 °C VR = Rated VR VALUES 0.6 0.76 0.57 0.69 0.1 5.0 62 2.0 10 000 mA pF nH V/μs V UNITS VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C Measured lead to lead 5 mm from package body Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to lead Maximum thermal resistance, junction to ambient Approximate weight Marking device Notes (1) SYMBOL TJ (1), TStg RthJL (2) RthJA DC operation TEST CONDITIONS VALUES - 55 to 150 36 UNITS °C °C/W 80 0.10 0.003 Case style SMB (similar DO-214AA) V1H g oz. dP tot 1 ------------ < ------------- thermal runaway condition for a diode on its own heatsink dT J R thJA Mounted 1" square PCB (2) www.vishay.com 2 For technical questions, contact: diodestech@vishay.com Document Number: 94113 Revision: 03-Mar-10 VS-10BQ060PbF Schottky Rectifier, 1.0 A Vishay High Power Products 10 10 TJ = 150 °C TJ = 150 °C TJ = 125 °C TJ = 25 °C IF - Instantaneous Forward Current (A) IR - Reverse Current (mA) 1 TJ = 125 °C TJ = 100 °C TJ = 75 °C 0.1 1 0.01 TJ = 50 °C 0.001 TJ = 25 °C 0.1 0.2 0.0001 0.4 0.6 0.8 1.0 0 10 20 30 40 50 60 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics VR - Reverse Voltage (V) Fig. 2 - Typical Peak Reverse Current vs. Reverse Voltage 1000 CT - Junction Capacitance (pF) 100 TJ = 25 °C 10 0 10 20 30 40 50 60 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 100 10 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 t2 1 Single pulse (thermal resistance) Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 1 10 . 100 0.1 0.00001 0.0001 0.001 0.01 0.1 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94113 Revision: 03-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 3 VS-10BQ060PbF Vishay High Power Products Schottky Rectifier, 1.0 A 160 0.9 DC Allowable Lead Temperature (°C) 150 140 130 120 110 100 90 80 70 See note (1) 60 0 0.2 0.4 Average Power Loss (W) D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 0.8 0.7 0.6 0.5 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC RMS limit 0.4 0.3 0.2 0.1 0 Square wave (D = 0.50) Rated VR applied 0.6 0.8 1.0 1.2 1.4 1.6 0 0.3 0.6 0.9 1.2 1.5 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Average Forward Current vs. Allowable Lead Temperature IF(AV) - Average Forward Current (A) Fig. 6 - Maximum Average Forward Dissipation vs. Average Forward Current IFSM - Non-Repetitive Surge Current (A) 1000 100 At any rated load condition and with rated VRRM applied following surge 10 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Peak Surge Forward Current vs. Pulse Duration Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR (1) www.vishay.com 4 For technical questions, contact: diodestech@vishay.com Document Number: 94113 Revision: 03-Mar-10 VS-10BQ060PbF Schottky Rectifier, 1.0 A Vishay High Power Products ORDERING INFORMATION TABLE Device code VS1 1 2 3 4 5 6 7 10 2 - B 3 Q 4 060 5 TR 6 PbF 7 HPP product suffix Current rating B = Single lead diode Q = Schottky “Q” series Voltage rating (060 = 60 V) None = Box (1000 pieces) TR = Tape and reel (3000 pieces) PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information Tape and reel Bulk www.vishay.com/doc?95017 www.vishay.com/doc?95029 www.vishay.com/doc?95034 www.vishay.com/doc?95397 Document Number: 94113 Revision: 03-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 5 Outline Dimensions Vishay High Power Products SMB DIMENSIONS in millimeters (inches) 2.15 (0.085) 1.80 (0.071) 3.80 (0.150) 3.30 (0.130) 1 2 4.70 (0.185) 4.10 (0.161) 1 Polarity 2 Part Number 2.5 TYP. (0.098 TYP.) 2.40 (0.094) 1.90 (0.075) 0.30 (0.012) 0.15 (0.006) Soldering pad 1.30 (0.051) 0.76 (0.030) 5.60 (0.220) 5.00 (0.197) 2.0 TYP. (0.079 TYP.) 4.2 (0.165) 4.0 (0.157) Document Number: 95017 Revision: 25-Jun-07 For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1